/* SPDX-License-Identifier: BSD-3-Clause * Copyright 2015 6WIND S.A. * Copyright 2015 Mellanox Technologies, Ltd */ #include #include #include #include #include #include #include #include #include #include #include /* Verbs header. */ /* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */ #ifdef PEDANTIC #pragma GCC diagnostic ignored "-Wpedantic" #endif #include #ifdef PEDANTIC #pragma GCC diagnostic error "-Wpedantic" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include "mlx5.h" #include "mlx5_utils.h" #include "mlx5_rxtx.h" #include "mlx5_autoconf.h" #include "mlx5_defs.h" #include "mlx5_glue.h" #include "mlx5_mr.h" #include "mlx5_flow.h" /* Device parameter to enable RX completion queue compression. */ #define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en" /* Device parameter to enable RX completion entry padding to 128B. */ #define MLX5_RXQ_CQE_PAD_EN "rxq_cqe_pad_en" /* Device parameter to enable padding Rx packet to cacheline size. */ #define MLX5_RXQ_PKT_PAD_EN "rxq_pkt_pad_en" /* Device parameter to enable Multi-Packet Rx queue. */ #define MLX5_RX_MPRQ_EN "mprq_en" /* Device parameter to configure log 2 of the number of strides for MPRQ. */ #define MLX5_RX_MPRQ_LOG_STRIDE_NUM "mprq_log_stride_num" /* Device parameter to limit the size of memcpy'd packet for MPRQ. */ #define MLX5_RX_MPRQ_MAX_MEMCPY_LEN "mprq_max_memcpy_len" /* Device parameter to set the minimum number of Rx queues to enable MPRQ. */ #define MLX5_RXQS_MIN_MPRQ "rxqs_min_mprq" /* Device parameter to configure inline send. */ #define MLX5_TXQ_INLINE "txq_inline" /* * Device parameter to configure the number of TX queues threshold for * enabling inline send. */ #define MLX5_TXQS_MIN_INLINE "txqs_min_inline" /* * Device parameter to configure the number of TX queues threshold for * enabling vectorized Tx. */ #define MLX5_TXQS_MAX_VEC "txqs_max_vec" /* Device parameter to enable multi-packet send WQEs. */ #define MLX5_TXQ_MPW_EN "txq_mpw_en" /* Device parameter to include 2 dsegs in the title WQEBB. */ #define MLX5_TXQ_MPW_HDR_DSEG_EN "txq_mpw_hdr_dseg_en" /* Device parameter to limit the size of inlining packet. */ #define MLX5_TXQ_MAX_INLINE_LEN "txq_max_inline_len" /* Device parameter to enable hardware Tx vector. */ #define MLX5_TX_VEC_EN "tx_vec_en" /* Device parameter to enable hardware Rx vector. */ #define MLX5_RX_VEC_EN "rx_vec_en" /* Allow L3 VXLAN flow creation. */ #define MLX5_L3_VXLAN_EN "l3_vxlan_en" /* Activate DV flow steering. */ #define MLX5_DV_FLOW_EN "dv_flow_en" /* Activate Netlink support in VF mode. */ #define MLX5_VF_NL_EN "vf_nl_en" /* Enable extending memsegs when creating a MR. */ #define MLX5_MR_EXT_MEMSEG_EN "mr_ext_memseg_en" /* Select port representors to instantiate. */ #define MLX5_REPRESENTOR "representor" #ifndef HAVE_IBV_MLX5_MOD_MPW #define MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED (1 << 2) #define MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW (1 << 3) #endif #ifndef HAVE_IBV_MLX5_MOD_CQE_128B_COMP #define MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP (1 << 4) #endif static const char *MZ_MLX5_PMD_SHARED_DATA = "mlx5_pmd_shared_data"; /* Shared memory between primary and secondary processes. */ struct mlx5_shared_data *mlx5_shared_data; /* Spinlock for mlx5_shared_data allocation. */ static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER; /* Process local data for secondary processes. */ static struct mlx5_local_data mlx5_local_data; /** Driver-specific log messages type. */ int mlx5_logtype; /** Data associated with devices to spawn. */ struct mlx5_dev_spawn_data { uint32_t ifindex; /**< Network interface index. */ uint32_t max_port; /**< IB device maximal port index. */ uint32_t ibv_port; /**< IB device physical port index. */ struct mlx5_switch_info info; /**< Switch information. */ struct ibv_device *ibv_dev; /**< Associated IB device. */ struct rte_eth_dev *eth_dev; /**< Associated Ethernet device. */ }; static LIST_HEAD(, mlx5_ibv_shared) mlx5_ibv_list = LIST_HEAD_INITIALIZER(); static pthread_mutex_t mlx5_ibv_list_mutex = PTHREAD_MUTEX_INITIALIZER; /** * Allocate shared IB device context. If there is multiport device the * master and representors will share this context, if there is single * port dedicated IB device, the context will be used by only given * port due to unification. * * Routine first searches the context for the specified IB device name, * if found the shared context assumed and reference counter is incremented. * If no context found the new one is created and initialized with specified * IB device context and parameters. * * @param[in] spawn * Pointer to the IB device attributes (name, port, etc). * * @return * Pointer to mlx5_ibv_shared object on success, * otherwise NULL and rte_errno is set. */ static struct mlx5_ibv_shared * mlx5_alloc_shared_ibctx(const struct mlx5_dev_spawn_data *spawn) { struct mlx5_ibv_shared *sh; int err = 0; uint32_t i; assert(spawn); /* Secondary process should not create the shared context. */ assert(rte_eal_process_type() == RTE_PROC_PRIMARY); pthread_mutex_lock(&mlx5_ibv_list_mutex); /* Search for IB context by device name. */ LIST_FOREACH(sh, &mlx5_ibv_list, next) { if (!strcmp(sh->ibdev_name, spawn->ibv_dev->name)) { sh->refcnt++; goto exit; } } /* No device found, we have to create new shared context. */ assert(spawn->max_port); sh = rte_zmalloc("ethdev shared ib context", sizeof(struct mlx5_ibv_shared) + spawn->max_port * sizeof(struct mlx5_ibv_shared_port), RTE_CACHE_LINE_SIZE); if (!sh) { DRV_LOG(ERR, "shared context allocation failure"); rte_errno = ENOMEM; goto exit; } /* Try to open IB device with DV first, then usual Verbs. */ errno = 0; sh->ctx = mlx5_glue->dv_open_device(spawn->ibv_dev); if (sh->ctx) { sh->devx = 1; DRV_LOG(DEBUG, "DevX is supported"); } else { sh->ctx = mlx5_glue->open_device(spawn->ibv_dev); if (!sh->ctx) { err = errno ? errno : ENODEV; goto error; } DRV_LOG(DEBUG, "DevX is NOT supported"); } err = mlx5_glue->query_device_ex(sh->ctx, NULL, &sh->device_attr); if (err) { DRV_LOG(DEBUG, "ibv_query_device_ex() failed"); goto error; } sh->refcnt = 1; sh->max_port = spawn->max_port; strncpy(sh->ibdev_name, sh->ctx->device->name, sizeof(sh->ibdev_name)); strncpy(sh->ibdev_path, sh->ctx->device->ibdev_path, sizeof(sh->ibdev_path)); pthread_mutex_init(&sh->intr_mutex, NULL); /* * Setting port_id to max unallowed value means * there is no interrupt subhandler installed for * the given port index i. */ for (i = 0; i < sh->max_port; i++) sh->port[i].ih_port_id = RTE_MAX_ETHPORTS; sh->pd = mlx5_glue->alloc_pd(sh->ctx); if (sh->pd == NULL) { DRV_LOG(ERR, "PD allocation failure"); err = ENOMEM; goto error; } LIST_INSERT_HEAD(&mlx5_ibv_list, sh, next); exit: pthread_mutex_unlock(&mlx5_ibv_list_mutex); return sh; error: pthread_mutex_unlock(&mlx5_ibv_list_mutex); assert(sh); if (sh->pd) claim_zero(mlx5_glue->dealloc_pd(sh->pd)); if (sh->ctx) claim_zero(mlx5_glue->close_device(sh->ctx)); rte_free(sh); assert(err > 0); rte_errno = err; return NULL; } /** * Free shared IB device context. Decrement counter and if zero free * all allocated resources and close handles. * * @param[in] sh * Pointer to mlx5_ibv_shared object to free */ static void mlx5_free_shared_ibctx(struct mlx5_ibv_shared *sh) { pthread_mutex_lock(&mlx5_ibv_list_mutex); #ifndef NDEBUG /* Check the object presence in the list. */ struct mlx5_ibv_shared *lctx; LIST_FOREACH(lctx, &mlx5_ibv_list, next) if (lctx == sh) break; assert(lctx); if (lctx != sh) { DRV_LOG(ERR, "Freeing non-existing shared IB context"); goto exit; } #endif assert(sh); assert(sh->refcnt); /* Secondary process should not free the shared context. */ assert(rte_eal_process_type() == RTE_PROC_PRIMARY); if (--sh->refcnt) goto exit; LIST_REMOVE(sh, next); /* * Ensure there is no async event handler installed. * Only primary process handles async device events. **/ assert(!sh->intr_cnt); if (sh->intr_cnt) rte_intr_callback_unregister (&sh->intr_handle, mlx5_dev_interrupt_handler, sh); pthread_mutex_destroy(&sh->intr_mutex); if (sh->pd) claim_zero(mlx5_glue->dealloc_pd(sh->pd)); if (sh->ctx) claim_zero(mlx5_glue->close_device(sh->ctx)); rte_free(sh); exit: pthread_mutex_unlock(&mlx5_ibv_list_mutex); } /** * Initialize DR related data within private structure. * Routine checks the reference counter and does actual * resources creation/initialization only if counter is zero. * * @param[in] priv * Pointer to the private device data structure. * * @return * Zero on success, positive error code otherwise. */ static int mlx5_alloc_shared_dr(struct mlx5_priv *priv) { #ifdef HAVE_MLX5DV_DR struct mlx5_ibv_shared *sh = priv->sh; int err = 0; void *ns; assert(sh); if (sh->dv_refcnt) { /* Shared DV/DR structures is already initialized. */ sh->dv_refcnt++; priv->dr_shared = 1; return 0; } /* Reference counter is zero, we should initialize structures. */ ns = mlx5dv_dr_create_ns(sh->ctx, MLX5DV_DR_NS_DOMAIN_INGRESS_BYPASS); if (!ns) { DRV_LOG(ERR, "ingress mlx5dv_dr_create_ns failed"); err = errno; goto error; } sh->rx_ns = ns; ns = mlx5dv_dr_create_ns(sh->ctx, MLX5DV_DR_NS_DOMAIN_EGRESS_BYPASS); if (!ns) { DRV_LOG(ERR, "egress mlx5dv_dr_create_ns failed"); err = errno; goto error; } pthread_mutex_init(&sh->dv_mutex, NULL); sh->tx_ns = ns; sh->dv_refcnt++; priv->dr_shared = 1; return 0; error: /* Rollback the created objects. */ if (sh->rx_ns) { mlx5dv_dr_destroy_ns(sh->rx_ns); sh->rx_ns = NULL; } if (sh->tx_ns) { mlx5dv_dr_destroy_ns(sh->tx_ns); sh->tx_ns = NULL; } return err; #else (void)priv; return 0; #endif } /** * Destroy DR related data within private structure. * * @param[in] priv * Pointer to the private device data structure. */ static void mlx5_free_shared_dr(struct mlx5_priv *priv) { #ifdef HAVE_MLX5DV_DR struct mlx5_ibv_shared *sh; if (!priv->dr_shared) return; priv->dr_shared = 0; sh = priv->sh; assert(sh); assert(sh->dv_refcnt); if (sh->dv_refcnt && --sh->dv_refcnt) return; if (sh->rx_ns) { mlx5dv_dr_destroy_ns(sh->rx_ns); sh->rx_ns = NULL; } if (sh->tx_ns) { mlx5dv_dr_destroy_ns(sh->tx_ns); sh->tx_ns = NULL; } pthread_mutex_destroy(&sh->dv_mutex); #else (void)priv; #endif } /** * Initialize shared data between primary and secondary process. * * A memzone is reserved by primary process and secondary processes attach to * the memzone. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ static int mlx5_init_shared_data(void) { const struct rte_memzone *mz; int ret = 0; rte_spinlock_lock(&mlx5_shared_data_lock); if (mlx5_shared_data == NULL) { if (rte_eal_process_type() == RTE_PROC_PRIMARY) { /* Allocate shared memory. */ mz = rte_memzone_reserve(MZ_MLX5_PMD_SHARED_DATA, sizeof(*mlx5_shared_data), SOCKET_ID_ANY, 0); if (mz == NULL) { DRV_LOG(ERR, "Cannot allocate mlx5 shared data\n"); ret = -rte_errno; goto error; } mlx5_shared_data = mz->addr; memset(mlx5_shared_data, 0, sizeof(*mlx5_shared_data)); rte_spinlock_init(&mlx5_shared_data->lock); } else { /* Lookup allocated shared memory. */ mz = rte_memzone_lookup(MZ_MLX5_PMD_SHARED_DATA); if (mz == NULL) { DRV_LOG(ERR, "Cannot attach mlx5 shared data\n"); ret = -rte_errno; goto error; } mlx5_shared_data = mz->addr; memset(&mlx5_local_data, 0, sizeof(mlx5_local_data)); } } error: rte_spinlock_unlock(&mlx5_shared_data_lock); return ret; } /** * Retrieve integer value from environment variable. * * @param[in] name * Environment variable name. * * @return * Integer value, 0 if the variable is not set. */ int mlx5_getenv_int(const char *name) { const char *val = getenv(name); if (val == NULL) return 0; return atoi(val); } /** * Verbs callback to allocate a memory. This function should allocate the space * according to the size provided residing inside a huge page. * Please note that all allocation must respect the alignment from libmlx5 * (i.e. currently sysconf(_SC_PAGESIZE)). * * @param[in] size * The size in bytes of the memory to allocate. * @param[in] data * A pointer to the callback data. * * @return * Allocated buffer, NULL otherwise and rte_errno is set. */ static void * mlx5_alloc_verbs_buf(size_t size, void *data) { struct mlx5_priv *priv = data; void *ret; size_t alignment = sysconf(_SC_PAGESIZE); unsigned int socket = SOCKET_ID_ANY; if (priv->verbs_alloc_ctx.type == MLX5_VERBS_ALLOC_TYPE_TX_QUEUE) { const struct mlx5_txq_ctrl *ctrl = priv->verbs_alloc_ctx.obj; socket = ctrl->socket; } else if (priv->verbs_alloc_ctx.type == MLX5_VERBS_ALLOC_TYPE_RX_QUEUE) { const struct mlx5_rxq_ctrl *ctrl = priv->verbs_alloc_ctx.obj; socket = ctrl->socket; } assert(data != NULL); ret = rte_malloc_socket(__func__, size, alignment, socket); if (!ret && size) rte_errno = ENOMEM; return ret; } /** * Verbs callback to free a memory. * * @param[in] ptr * A pointer to the memory to free. * @param[in] data * A pointer to the callback data. */ static void mlx5_free_verbs_buf(void *ptr, void *data __rte_unused) { assert(data != NULL); rte_free(ptr); } /** * Initialize process private data structure. * * @param dev * Pointer to Ethernet device structure. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ int mlx5_proc_priv_init(struct rte_eth_dev *dev) { struct mlx5_priv *priv = dev->data->dev_private; struct mlx5_proc_priv *ppriv; size_t ppriv_size; /* * UAR register table follows the process private structure. BlueFlame * registers for Tx queues are stored in the table. */ ppriv_size = sizeof(struct mlx5_proc_priv) + priv->txqs_n * sizeof(void *); ppriv = rte_malloc_socket("mlx5_proc_priv", ppriv_size, RTE_CACHE_LINE_SIZE, dev->device->numa_node); if (!ppriv) { rte_errno = ENOMEM; return -rte_errno; } ppriv->uar_table_sz = ppriv_size; dev->process_private = ppriv; return 0; } /** * Un-initialize process private data structure. * * @param dev * Pointer to Ethernet device structure. */ static void mlx5_proc_priv_uninit(struct rte_eth_dev *dev) { if (!dev->process_private) return; rte_free(dev->process_private); dev->process_private = NULL; } /** * DPDK callback to close the device. * * Destroy all queues and objects, free memory. * * @param dev * Pointer to Ethernet device structure. */ static void mlx5_dev_close(struct rte_eth_dev *dev) { struct mlx5_priv *priv = dev->data->dev_private; unsigned int i; int ret; DRV_LOG(DEBUG, "port %u closing device \"%s\"", dev->data->port_id, ((priv->sh->ctx != NULL) ? priv->sh->ctx->device->name : "")); /* In case mlx5_dev_stop() has not been called. */ mlx5_dev_interrupt_handler_uninstall(dev); mlx5_traffic_disable(dev); mlx5_flow_flush(dev, NULL); /* Prevent crashes when queues are still in use. */ dev->rx_pkt_burst = removed_rx_burst; dev->tx_pkt_burst = removed_tx_burst; rte_wmb(); /* Disable datapath on secondary process. */ mlx5_mp_req_stop_rxtx(dev); if (priv->rxqs != NULL) { /* XXX race condition if mlx5_rx_burst() is still running. */ usleep(1000); for (i = 0; (i != priv->rxqs_n); ++i) mlx5_rxq_release(dev, i); priv->rxqs_n = 0; priv->rxqs = NULL; } if (priv->txqs != NULL) { /* XXX race condition if mlx5_tx_burst() is still running. */ usleep(1000); for (i = 0; (i != priv->txqs_n); ++i) mlx5_txq_release(dev, i); priv->txqs_n = 0; priv->txqs = NULL; } mlx5_proc_priv_uninit(dev); mlx5_mprq_free_mp(dev); mlx5_mr_release(dev); assert(priv->sh); mlx5_free_shared_dr(priv); if (priv->rss_conf.rss_key != NULL) rte_free(priv->rss_conf.rss_key); if (priv->reta_idx != NULL) rte_free(priv->reta_idx); if (priv->config.vf) mlx5_nl_mac_addr_flush(dev); if (priv->nl_socket_route >= 0) close(priv->nl_socket_route); if (priv->nl_socket_rdma >= 0) close(priv->nl_socket_rdma); if (priv->tcf_context) mlx5_flow_tcf_context_destroy(priv->tcf_context); if (priv->sh) { /* * Free the shared context in last turn, because the cleanup * routines above may use some shared fields, like * mlx5_nl_mac_addr_flush() uses ibdev_path for retrieveing * ifindex if Netlink fails. */ mlx5_free_shared_ibctx(priv->sh); priv->sh = NULL; } ret = mlx5_hrxq_ibv_verify(dev); if (ret) DRV_LOG(WARNING, "port %u some hash Rx queue still remain", dev->data->port_id); ret = mlx5_ind_table_ibv_verify(dev); if (ret) DRV_LOG(WARNING, "port %u some indirection table still remain", dev->data->port_id); ret = mlx5_rxq_ibv_verify(dev); if (ret) DRV_LOG(WARNING, "port %u some Verbs Rx queue still remain", dev->data->port_id); ret = mlx5_rxq_verify(dev); if (ret) DRV_LOG(WARNING, "port %u some Rx queues still remain", dev->data->port_id); ret = mlx5_txq_ibv_verify(dev); if (ret) DRV_LOG(WARNING, "port %u some Verbs Tx queue still remain", dev->data->port_id); ret = mlx5_txq_verify(dev); if (ret) DRV_LOG(WARNING, "port %u some Tx queues still remain", dev->data->port_id); ret = mlx5_flow_verify(dev); if (ret) DRV_LOG(WARNING, "port %u some flows still remain", dev->data->port_id); if (priv->domain_id != RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) { unsigned int c = 0; uint16_t port_id; RTE_ETH_FOREACH_DEV_OF(port_id, dev->device) { struct mlx5_priv *opriv = rte_eth_devices[port_id].data->dev_private; if (!opriv || opriv->domain_id != priv->domain_id || &rte_eth_devices[port_id] == dev) continue; ++c; } if (!c) claim_zero(rte_eth_switch_domain_free(priv->domain_id)); } memset(priv, 0, sizeof(*priv)); priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID; /* * Reset mac_addrs to NULL such that it is not freed as part of * rte_eth_dev_release_port(). mac_addrs is part of dev_private so * it is freed when dev_private is freed. */ dev->data->mac_addrs = NULL; } const struct eth_dev_ops mlx5_dev_ops = { .dev_configure = mlx5_dev_configure, .dev_start = mlx5_dev_start, .dev_stop = mlx5_dev_stop, .dev_set_link_down = mlx5_set_link_down, .dev_set_link_up = mlx5_set_link_up, .dev_close = mlx5_dev_close, .promiscuous_enable = mlx5_promiscuous_enable, .promiscuous_disable = mlx5_promiscuous_disable, .allmulticast_enable = mlx5_allmulticast_enable, .allmulticast_disable = mlx5_allmulticast_disable, .link_update = mlx5_link_update, .stats_get = mlx5_stats_get, .stats_reset = mlx5_stats_reset, .xstats_get = mlx5_xstats_get, .xstats_reset = mlx5_xstats_reset, .xstats_get_names = mlx5_xstats_get_names, .fw_version_get = mlx5_fw_version_get, .dev_infos_get = mlx5_dev_infos_get, .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get, .vlan_filter_set = mlx5_vlan_filter_set, .rx_queue_setup = mlx5_rx_queue_setup, .tx_queue_setup = mlx5_tx_queue_setup, .rx_queue_release = mlx5_rx_queue_release, .tx_queue_release = mlx5_tx_queue_release, .flow_ctrl_get = mlx5_dev_get_flow_ctrl, .flow_ctrl_set = mlx5_dev_set_flow_ctrl, .mac_addr_remove = mlx5_mac_addr_remove, .mac_addr_add = mlx5_mac_addr_add, .mac_addr_set = mlx5_mac_addr_set, .set_mc_addr_list = mlx5_set_mc_addr_list, .mtu_set = mlx5_dev_set_mtu, .vlan_strip_queue_set = mlx5_vlan_strip_queue_set, .vlan_offload_set = mlx5_vlan_offload_set, .reta_update = mlx5_dev_rss_reta_update, .reta_query = mlx5_dev_rss_reta_query, .rss_hash_update = mlx5_rss_hash_update, .rss_hash_conf_get = mlx5_rss_hash_conf_get, .filter_ctrl = mlx5_dev_filter_ctrl, .rx_descriptor_status = mlx5_rx_descriptor_status, .tx_descriptor_status = mlx5_tx_descriptor_status, .rx_queue_count = mlx5_rx_queue_count, .rx_queue_intr_enable = mlx5_rx_intr_enable, .rx_queue_intr_disable = mlx5_rx_intr_disable, .is_removed = mlx5_is_removed, }; /* Available operations from secondary process. */ static const struct eth_dev_ops mlx5_dev_sec_ops = { .stats_get = mlx5_stats_get, .stats_reset = mlx5_stats_reset, .xstats_get = mlx5_xstats_get, .xstats_reset = mlx5_xstats_reset, .xstats_get_names = mlx5_xstats_get_names, .fw_version_get = mlx5_fw_version_get, .dev_infos_get = mlx5_dev_infos_get, .rx_descriptor_status = mlx5_rx_descriptor_status, .tx_descriptor_status = mlx5_tx_descriptor_status, }; /* Available operations in flow isolated mode. */ const struct eth_dev_ops mlx5_dev_ops_isolate = { .dev_configure = mlx5_dev_configure, .dev_start = mlx5_dev_start, .dev_stop = mlx5_dev_stop, .dev_set_link_down = mlx5_set_link_down, .dev_set_link_up = mlx5_set_link_up, .dev_close = mlx5_dev_close, .promiscuous_enable = mlx5_promiscuous_enable, .promiscuous_disable = mlx5_promiscuous_disable, .allmulticast_enable = mlx5_allmulticast_enable, .allmulticast_disable = mlx5_allmulticast_disable, .link_update = mlx5_link_update, .stats_get = mlx5_stats_get, .stats_reset = mlx5_stats_reset, .xstats_get = mlx5_xstats_get, .xstats_reset = mlx5_xstats_reset, .xstats_get_names = mlx5_xstats_get_names, .fw_version_get = mlx5_fw_version_get, .dev_infos_get = mlx5_dev_infos_get, .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get, .vlan_filter_set = mlx5_vlan_filter_set, .rx_queue_setup = mlx5_rx_queue_setup, .tx_queue_setup = mlx5_tx_queue_setup, .rx_queue_release = mlx5_rx_queue_release, .tx_queue_release = mlx5_tx_queue_release, .flow_ctrl_get = mlx5_dev_get_flow_ctrl, .flow_ctrl_set = mlx5_dev_set_flow_ctrl, .mac_addr_remove = mlx5_mac_addr_remove, .mac_addr_add = mlx5_mac_addr_add, .mac_addr_set = mlx5_mac_addr_set, .set_mc_addr_list = mlx5_set_mc_addr_list, .mtu_set = mlx5_dev_set_mtu, .vlan_strip_queue_set = mlx5_vlan_strip_queue_set, .vlan_offload_set = mlx5_vlan_offload_set, .filter_ctrl = mlx5_dev_filter_ctrl, .rx_descriptor_status = mlx5_rx_descriptor_status, .tx_descriptor_status = mlx5_tx_descriptor_status, .rx_queue_intr_enable = mlx5_rx_intr_enable, .rx_queue_intr_disable = mlx5_rx_intr_disable, .is_removed = mlx5_is_removed, }; /** * Verify and store value for device argument. * * @param[in] key * Key argument to verify. * @param[in] val * Value associated with key. * @param opaque * User data. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ static int mlx5_args_check(const char *key, const char *val, void *opaque) { struct mlx5_dev_config *config = opaque; unsigned long tmp; /* No-op, port representors are processed in mlx5_dev_spawn(). */ if (!strcmp(MLX5_REPRESENTOR, key)) return 0; errno = 0; tmp = strtoul(val, NULL, 0); if (errno) { rte_errno = errno; DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val); return -rte_errno; } if (strcmp(MLX5_RXQ_CQE_COMP_EN, key) == 0) { config->cqe_comp = !!tmp; } else if (strcmp(MLX5_RXQ_CQE_PAD_EN, key) == 0) { config->cqe_pad = !!tmp; } else if (strcmp(MLX5_RXQ_PKT_PAD_EN, key) == 0) { config->hw_padding = !!tmp; } else if (strcmp(MLX5_RX_MPRQ_EN, key) == 0) { config->mprq.enabled = !!tmp; } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) { config->mprq.stride_num_n = tmp; } else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) { config->mprq.max_memcpy_len = tmp; } else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) { config->mprq.min_rxqs_num = tmp; } else if (strcmp(MLX5_TXQ_INLINE, key) == 0) { config->txq_inline = tmp; } else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) { config->txqs_inline = tmp; } else if (strcmp(MLX5_TXQS_MAX_VEC, key) == 0) { config->txqs_vec = tmp; } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) { config->mps = !!tmp; } else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) { config->mpw_hdr_dseg = !!tmp; } else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) { config->inline_max_packet_sz = tmp; } else if (strcmp(MLX5_TX_VEC_EN, key) == 0) { config->tx_vec_en = !!tmp; } else if (strcmp(MLX5_RX_VEC_EN, key) == 0) { config->rx_vec_en = !!tmp; } else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) { config->l3_vxlan_en = !!tmp; } else if (strcmp(MLX5_VF_NL_EN, key) == 0) { config->vf_nl_en = !!tmp; } else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) { config->dv_flow_en = !!tmp; } else if (strcmp(MLX5_MR_EXT_MEMSEG_EN, key) == 0) { config->mr_ext_memseg_en = !!tmp; } else { DRV_LOG(WARNING, "%s: unknown parameter", key); rte_errno = EINVAL; return -rte_errno; } return 0; } /** * Parse device parameters. * * @param config * Pointer to device configuration structure. * @param devargs * Device arguments structure. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ static int mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs) { const char **params = (const char *[]){ MLX5_RXQ_CQE_COMP_EN, MLX5_RXQ_CQE_PAD_EN, MLX5_RXQ_PKT_PAD_EN, MLX5_RX_MPRQ_EN, MLX5_RX_MPRQ_LOG_STRIDE_NUM, MLX5_RX_MPRQ_MAX_MEMCPY_LEN, MLX5_RXQS_MIN_MPRQ, MLX5_TXQ_INLINE, MLX5_TXQS_MIN_INLINE, MLX5_TXQS_MAX_VEC, MLX5_TXQ_MPW_EN, MLX5_TXQ_MPW_HDR_DSEG_EN, MLX5_TXQ_MAX_INLINE_LEN, MLX5_TX_VEC_EN, MLX5_RX_VEC_EN, MLX5_L3_VXLAN_EN, MLX5_VF_NL_EN, MLX5_DV_FLOW_EN, MLX5_MR_EXT_MEMSEG_EN, MLX5_REPRESENTOR, NULL, }; struct rte_kvargs *kvlist; int ret = 0; int i; if (devargs == NULL) return 0; /* Following UGLY cast is done to pass checkpatch. */ kvlist = rte_kvargs_parse(devargs->args, params); if (kvlist == NULL) return 0; /* Process parameters. */ for (i = 0; (params[i] != NULL); ++i) { if (rte_kvargs_count(kvlist, params[i])) { ret = rte_kvargs_process(kvlist, params[i], mlx5_args_check, config); if (ret) { rte_errno = EINVAL; rte_kvargs_free(kvlist); return -rte_errno; } } } rte_kvargs_free(kvlist); return 0; } static struct rte_pci_driver mlx5_driver; /** * PMD global initialization. * * Independent from individual device, this function initializes global * per-PMD data structures distinguishing primary and secondary processes. * Hence, each initialization is called once per a process. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ static int mlx5_init_once(void) { struct mlx5_shared_data *sd; struct mlx5_local_data *ld = &mlx5_local_data; if (mlx5_init_shared_data()) return -rte_errno; sd = mlx5_shared_data; assert(sd); rte_spinlock_lock(&sd->lock); switch (rte_eal_process_type()) { case RTE_PROC_PRIMARY: if (sd->init_done) break; LIST_INIT(&sd->mem_event_cb_list); rte_rwlock_init(&sd->mem_event_rwlock); rte_mem_event_callback_register("MLX5_MEM_EVENT_CB", mlx5_mr_mem_event_cb, NULL); mlx5_mp_init_primary(); sd->init_done = true; break; case RTE_PROC_SECONDARY: if (ld->init_done) break; mlx5_mp_init_secondary(); ++sd->secondary_cnt; ld->init_done = true; break; default: break; } rte_spinlock_unlock(&sd->lock); return 0; } /** * Spawn an Ethernet device from Verbs information. * * @param dpdk_dev * Backing DPDK device. * @param spawn * Verbs device parameters (name, port, switch_info) to spawn. * @param config * Device configuration parameters. * * @return * A valid Ethernet device object on success, NULL otherwise and rte_errno * is set. The following errors are defined: * * EBUSY: device is not supposed to be spawned. * EEXIST: device is already spawned */ static struct rte_eth_dev * mlx5_dev_spawn(struct rte_device *dpdk_dev, struct mlx5_dev_spawn_data *spawn, struct mlx5_dev_config config) { const struct mlx5_switch_info *switch_info = &spawn->info; struct mlx5_ibv_shared *sh = NULL; struct ibv_port_attr port_attr; struct mlx5dv_context dv_attr = { .comp_mask = 0 }; struct rte_eth_dev *eth_dev = NULL; struct mlx5_priv *priv = NULL; int err = 0; unsigned int hw_padding = 0; unsigned int mps; unsigned int cqe_comp; unsigned int cqe_pad = 0; unsigned int tunnel_en = 0; unsigned int mpls_en = 0; unsigned int swp = 0; unsigned int mprq = 0; unsigned int mprq_min_stride_size_n = 0; unsigned int mprq_max_stride_size_n = 0; unsigned int mprq_min_stride_num_n = 0; unsigned int mprq_max_stride_num_n = 0; struct ether_addr mac; char name[RTE_ETH_NAME_MAX_LEN]; int own_domain_id = 0; uint16_t port_id; unsigned int i; /* Determine if this port representor is supposed to be spawned. */ if (switch_info->representor && dpdk_dev->devargs) { struct rte_eth_devargs eth_da; err = rte_eth_devargs_parse(dpdk_dev->devargs->args, ð_da); if (err) { rte_errno = -err; DRV_LOG(ERR, "failed to process device arguments: %s", strerror(rte_errno)); return NULL; } for (i = 0; i < eth_da.nb_representor_ports; ++i) if (eth_da.representor_ports[i] == (uint16_t)switch_info->port_name) break; if (i == eth_da.nb_representor_ports) { rte_errno = EBUSY; return NULL; } } /* Build device name. */ if (!switch_info->representor) strlcpy(name, dpdk_dev->name, sizeof(name)); else snprintf(name, sizeof(name), "%s_representor_%u", dpdk_dev->name, switch_info->port_name); /* check if the device is already spawned */ if (rte_eth_dev_get_port_by_name(name, &port_id) == 0) { rte_errno = EEXIST; return NULL; } DRV_LOG(DEBUG, "naming Ethernet device \"%s\"", name); if (rte_eal_process_type() == RTE_PROC_SECONDARY) { eth_dev = rte_eth_dev_attach_secondary(name); if (eth_dev == NULL) { DRV_LOG(ERR, "can not attach rte ethdev"); rte_errno = ENOMEM; return NULL; } eth_dev->device = dpdk_dev; eth_dev->dev_ops = &mlx5_dev_sec_ops; err = mlx5_proc_priv_init(eth_dev); if (err) return NULL; /* Receive command fd from primary process */ err = mlx5_mp_req_verbs_cmd_fd(eth_dev); if (err < 0) return NULL; /* Remap UAR for Tx queues. */ err = mlx5_tx_uar_init_secondary(eth_dev, err); if (err) return NULL; /* * Ethdev pointer is still required as input since * the primary device is not accessible from the * secondary process. */ eth_dev->rx_pkt_burst = mlx5_select_rx_function(eth_dev); eth_dev->tx_pkt_burst = mlx5_select_tx_function(eth_dev); return eth_dev; } sh = mlx5_alloc_shared_ibctx(spawn); if (!sh) return NULL; config.devx = sh->devx; #ifdef HAVE_IBV_MLX5_MOD_SWP dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_SWP; #endif /* * Multi-packet send is supported by ConnectX-4 Lx PF as well * as all ConnectX-5 devices. */ #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS; #endif #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_STRIDING_RQ; #endif mlx5_glue->dv_query_device(sh->ctx, &dv_attr); if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED) { if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW) { DRV_LOG(DEBUG, "enhanced MPW is supported"); mps = MLX5_MPW_ENHANCED; } else { DRV_LOG(DEBUG, "MPW is supported"); mps = MLX5_MPW; } } else { DRV_LOG(DEBUG, "MPW isn't supported"); mps = MLX5_MPW_DISABLED; } #ifdef HAVE_IBV_MLX5_MOD_SWP if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_SWP) swp = dv_attr.sw_parsing_caps.sw_parsing_offloads; DRV_LOG(DEBUG, "SWP support: %u", swp); #endif config.swp = !!swp; #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_STRIDING_RQ) { struct mlx5dv_striding_rq_caps mprq_caps = dv_attr.striding_rq_caps; DRV_LOG(DEBUG, "\tmin_single_stride_log_num_of_bytes: %d", mprq_caps.min_single_stride_log_num_of_bytes); DRV_LOG(DEBUG, "\tmax_single_stride_log_num_of_bytes: %d", mprq_caps.max_single_stride_log_num_of_bytes); DRV_LOG(DEBUG, "\tmin_single_wqe_log_num_of_strides: %d", mprq_caps.min_single_wqe_log_num_of_strides); DRV_LOG(DEBUG, "\tmax_single_wqe_log_num_of_strides: %d", mprq_caps.max_single_wqe_log_num_of_strides); DRV_LOG(DEBUG, "\tsupported_qpts: %d", mprq_caps.supported_qpts); DRV_LOG(DEBUG, "device supports Multi-Packet RQ"); mprq = 1; mprq_min_stride_size_n = mprq_caps.min_single_stride_log_num_of_bytes; mprq_max_stride_size_n = mprq_caps.max_single_stride_log_num_of_bytes; mprq_min_stride_num_n = mprq_caps.min_single_wqe_log_num_of_strides; mprq_max_stride_num_n = mprq_caps.max_single_wqe_log_num_of_strides; config.mprq.stride_num_n = RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N, mprq_min_stride_num_n); } #endif if (RTE_CACHE_LINE_SIZE == 128 && !(dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP)) cqe_comp = 0; else cqe_comp = 1; config.cqe_comp = cqe_comp; #ifdef HAVE_IBV_MLX5_MOD_CQE_128B_PAD /* Whether device supports 128B Rx CQE padding. */ cqe_pad = RTE_CACHE_LINE_SIZE == 128 && (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_PAD); #endif #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) { tunnel_en = ((dv_attr.tunnel_offloads_caps & MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_VXLAN) && (dv_attr.tunnel_offloads_caps & MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE)); } DRV_LOG(DEBUG, "tunnel offloading is %ssupported", tunnel_en ? "" : "not "); #else DRV_LOG(WARNING, "tunnel offloading disabled due to old OFED/rdma-core version"); #endif config.tunnel_en = tunnel_en; #ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT mpls_en = ((dv_attr.tunnel_offloads_caps & MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_GRE) && (dv_attr.tunnel_offloads_caps & MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_UDP)); DRV_LOG(DEBUG, "MPLS over GRE/UDP tunnel offloading is %ssupported", mpls_en ? "" : "not "); #else DRV_LOG(WARNING, "MPLS over GRE/UDP tunnel offloading disabled due to" " old OFED/rdma-core version or firmware configuration"); #endif config.mpls_en = mpls_en; /* Check port status. */ err = mlx5_glue->query_port(sh->ctx, spawn->ibv_port, &port_attr); if (err) { DRV_LOG(ERR, "port query failed: %s", strerror(err)); goto error; } if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) { DRV_LOG(ERR, "port is not configured in Ethernet mode"); err = EINVAL; goto error; } if (port_attr.state != IBV_PORT_ACTIVE) DRV_LOG(DEBUG, "port is not active: \"%s\" (%d)", mlx5_glue->port_state_str(port_attr.state), port_attr.state); /* Allocate private eth device data. */ priv = rte_zmalloc("ethdev private structure", sizeof(*priv), RTE_CACHE_LINE_SIZE); if (priv == NULL) { DRV_LOG(ERR, "priv allocation failure"); err = ENOMEM; goto error; } priv->sh = sh; priv->ibv_port = spawn->ibv_port; priv->mtu = ETHER_MTU; #ifndef RTE_ARCH_64 /* Initialize UAR access locks for 32bit implementations. */ rte_spinlock_init(&priv->uar_lock_cq); for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++) rte_spinlock_init(&priv->uar_lock[i]); #endif /* Some internal functions rely on Netlink sockets, open them now. */ priv->nl_socket_rdma = mlx5_nl_init(NETLINK_RDMA); priv->nl_socket_route = mlx5_nl_init(NETLINK_ROUTE); priv->nl_sn = 0; priv->representor = !!switch_info->representor; priv->master = !!switch_info->master; priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID; /* * Currently we support single E-Switch per PF configurations * only and vport_id field contains the vport index for * associated VF, which is deduced from representor port name. * For example, let's have the IB device port 10, it has * attached network device eth0, which has port name attribute * pf0vf2, we can deduce the VF number as 2, and set vport index * as 3 (2+1). This assigning schema should be changed if the * multiple E-Switch instances per PF configurations or/and PCI * subfunctions are added. */ priv->vport_id = switch_info->representor ? switch_info->port_name + 1 : -1; /* representor_id field keeps the unmodified port/VF index. */ priv->representor_id = switch_info->representor ? switch_info->port_name : -1; /* * Look for sibling devices in order to reuse their switch domain * if any, otherwise allocate one. */ RTE_ETH_FOREACH_DEV_OF(port_id, dpdk_dev) { const struct mlx5_priv *opriv = rte_eth_devices[port_id].data->dev_private; if (!opriv || opriv->domain_id == RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) continue; priv->domain_id = opriv->domain_id; break; } if (priv->domain_id == RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) { err = rte_eth_switch_domain_alloc(&priv->domain_id); if (err) { err = rte_errno; DRV_LOG(ERR, "unable to allocate switch domain: %s", strerror(rte_errno)); goto error; } own_domain_id = 1; } err = mlx5_args(&config, dpdk_dev->devargs); if (err) { err = rte_errno; DRV_LOG(ERR, "failed to process device arguments: %s", strerror(rte_errno)); goto error; } config.hw_csum = !!(sh->device_attr.device_cap_flags_ex & IBV_DEVICE_RAW_IP_CSUM); DRV_LOG(DEBUG, "checksum offloading is %ssupported", (config.hw_csum ? "" : "not ")); #if !defined(HAVE_IBV_DEVICE_COUNTERS_SET_V42) && \ !defined(HAVE_IBV_DEVICE_COUNTERS_SET_V45) DRV_LOG(DEBUG, "counters are not supported"); #endif #ifndef HAVE_IBV_FLOW_DV_SUPPORT if (config.dv_flow_en) { DRV_LOG(WARNING, "DV flow is not supported"); config.dv_flow_en = 0; } #endif config.ind_table_max_size = sh->device_attr.rss_caps.max_rwq_indirection_table_size; /* * Remove this check once DPDK supports larger/variable * indirection tables. */ if (config.ind_table_max_size > (unsigned int)ETH_RSS_RETA_SIZE_512) config.ind_table_max_size = ETH_RSS_RETA_SIZE_512; DRV_LOG(DEBUG, "maximum Rx indirection table size is %u", config.ind_table_max_size); config.hw_vlan_strip = !!(sh->device_attr.raw_packet_caps & IBV_RAW_PACKET_CAP_CVLAN_STRIPPING); DRV_LOG(DEBUG, "VLAN stripping is %ssupported", (config.hw_vlan_strip ? "" : "not ")); config.hw_fcs_strip = !!(sh->device_attr.raw_packet_caps & IBV_RAW_PACKET_CAP_SCATTER_FCS); DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported", (config.hw_fcs_strip ? "" : "not ")); #if defined(HAVE_IBV_WQ_FLAG_RX_END_PADDING) hw_padding = !!sh->device_attr.rx_pad_end_addr_align; #elif defined(HAVE_IBV_WQ_FLAGS_PCI_WRITE_END_PADDING) hw_padding = !!(sh->device_attr.device_cap_flags_ex & IBV_DEVICE_PCI_WRITE_END_PADDING); #endif if (config.hw_padding && !hw_padding) { DRV_LOG(DEBUG, "Rx end alignment padding isn't supported"); config.hw_padding = 0; } else if (config.hw_padding) { DRV_LOG(DEBUG, "Rx end alignment padding is enabled"); } config.tso = (sh->device_attr.tso_caps.max_tso > 0 && (sh->device_attr.tso_caps.supported_qpts & (1 << IBV_QPT_RAW_PACKET))); if (config.tso) config.tso_max_payload_sz = sh->device_attr.tso_caps.max_tso; /* * MPW is disabled by default, while the Enhanced MPW is enabled * by default. */ if (config.mps == MLX5_ARG_UNSET) config.mps = (mps == MLX5_MPW_ENHANCED) ? MLX5_MPW_ENHANCED : MLX5_MPW_DISABLED; else config.mps = config.mps ? mps : MLX5_MPW_DISABLED; DRV_LOG(INFO, "%sMPS is %s", config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "", config.mps != MLX5_MPW_DISABLED ? "enabled" : "disabled"); if (config.cqe_comp && !cqe_comp) { DRV_LOG(WARNING, "Rx CQE compression isn't supported"); config.cqe_comp = 0; } if (config.cqe_pad && !cqe_pad) { DRV_LOG(WARNING, "Rx CQE padding isn't supported"); config.cqe_pad = 0; } else if (config.cqe_pad) { DRV_LOG(INFO, "Rx CQE padding is enabled"); } if (config.mprq.enabled && mprq) { if (config.mprq.stride_num_n > mprq_max_stride_num_n || config.mprq.stride_num_n < mprq_min_stride_num_n) { config.mprq.stride_num_n = RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N, mprq_min_stride_num_n); DRV_LOG(WARNING, "the number of strides" " for Multi-Packet RQ is out of range," " setting default value (%u)", 1 << config.mprq.stride_num_n); } config.mprq.min_stride_size_n = mprq_min_stride_size_n; config.mprq.max_stride_size_n = mprq_max_stride_size_n; } else if (config.mprq.enabled && !mprq) { DRV_LOG(WARNING, "Multi-Packet RQ isn't supported"); config.mprq.enabled = 0; } eth_dev = rte_eth_dev_allocate(name); if (eth_dev == NULL) { DRV_LOG(ERR, "can not allocate rte ethdev"); err = ENOMEM; goto error; } /* Flag to call rte_eth_dev_release_port() in rte_eth_dev_close(). */ eth_dev->data->dev_flags |= RTE_ETH_DEV_CLOSE_REMOVE; if (priv->representor) { eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR; eth_dev->data->representor_id = priv->representor_id; } eth_dev->data->dev_private = priv; priv->dev_data = eth_dev->data; eth_dev->data->mac_addrs = priv->mac; eth_dev->device = dpdk_dev; /* Configure the first MAC address by default. */ if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) { DRV_LOG(ERR, "port %u cannot get MAC address, is mlx5_en" " loaded? (errno: %s)", eth_dev->data->port_id, strerror(rte_errno)); err = ENODEV; goto error; } DRV_LOG(INFO, "port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x", eth_dev->data->port_id, mac.addr_bytes[0], mac.addr_bytes[1], mac.addr_bytes[2], mac.addr_bytes[3], mac.addr_bytes[4], mac.addr_bytes[5]); #ifndef NDEBUG { char ifname[IF_NAMESIZE]; if (mlx5_get_ifname(eth_dev, &ifname) == 0) DRV_LOG(DEBUG, "port %u ifname is \"%s\"", eth_dev->data->port_id, ifname); else DRV_LOG(DEBUG, "port %u ifname is unknown", eth_dev->data->port_id); } #endif /* Get actual MTU if possible. */ err = mlx5_get_mtu(eth_dev, &priv->mtu); if (err) { err = rte_errno; goto error; } DRV_LOG(DEBUG, "port %u MTU is %u", eth_dev->data->port_id, priv->mtu); /* Initialize burst functions to prevent crashes before link-up. */ eth_dev->rx_pkt_burst = removed_rx_burst; eth_dev->tx_pkt_burst = removed_tx_burst; eth_dev->dev_ops = &mlx5_dev_ops; /* Register MAC address. */ claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0)); if (config.vf && config.vf_nl_en) mlx5_nl_mac_addr_sync(eth_dev); priv->tcf_context = mlx5_flow_tcf_context_create(); if (!priv->tcf_context) { err = -rte_errno; DRV_LOG(WARNING, "flow rules relying on switch offloads will not be" " supported: cannot open libmnl socket: %s", strerror(rte_errno)); } else { struct rte_flow_error error; unsigned int ifindex = mlx5_ifindex(eth_dev); if (!ifindex) { err = -rte_errno; error.message = "cannot retrieve network interface index"; } else { err = mlx5_flow_tcf_init(priv->tcf_context, ifindex, &error); } if (err) { DRV_LOG(WARNING, "flow rules relying on switch offloads will" " not be supported: %s: %s", error.message, strerror(rte_errno)); mlx5_flow_tcf_context_destroy(priv->tcf_context); priv->tcf_context = NULL; } } if (config.dv_flow_en) { err = mlx5_alloc_shared_dr(priv); if (err) goto error; } TAILQ_INIT(&priv->flows); TAILQ_INIT(&priv->ctrl_flows); /* Hint libmlx5 to use PMD allocator for data plane resources */ struct mlx5dv_ctx_allocators alctr = { .alloc = &mlx5_alloc_verbs_buf, .free = &mlx5_free_verbs_buf, .data = priv, }; mlx5_glue->dv_set_context_attr(sh->ctx, MLX5DV_CTX_ATTR_BUF_ALLOCATORS, (void *)((uintptr_t)&alctr)); /* Bring Ethernet device up. */ DRV_LOG(DEBUG, "port %u forcing Ethernet interface up", eth_dev->data->port_id); mlx5_set_link_up(eth_dev); /* * Even though the interrupt handler is not installed yet, * interrupts will still trigger on the async_fd from * Verbs context returned by ibv_open_device(). */ mlx5_link_update(eth_dev, 0); /* Store device configuration on private structure. */ priv->config = config; /* Supported Verbs flow priority number detection. */ err = mlx5_flow_discover_priorities(eth_dev); if (err < 0) { err = -err; goto error; } priv->config.flow_prio = err; /* * Once the device is added to the list of memory event * callback, its global MR cache table cannot be expanded * on the fly because of deadlock. If it overflows, lookup * should be done by searching MR list linearly, which is slow. */ err = mlx5_mr_btree_init(&priv->mr.cache, MLX5_MR_BTREE_CACHE_N * 2, eth_dev->device->numa_node); if (err) { err = rte_errno; goto error; } /* Add device to memory callback list. */ rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock); LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list, priv, mem_event_cb); rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock); return eth_dev; error: if (priv) { if (priv->sh) mlx5_free_shared_dr(priv); if (priv->nl_socket_route >= 0) close(priv->nl_socket_route); if (priv->nl_socket_rdma >= 0) close(priv->nl_socket_rdma); if (priv->tcf_context) mlx5_flow_tcf_context_destroy(priv->tcf_context); if (own_domain_id) claim_zero(rte_eth_switch_domain_free(priv->domain_id)); rte_free(priv); if (eth_dev != NULL) eth_dev->data->dev_private = NULL; } if (eth_dev != NULL) { /* mac_addrs must not be freed alone because part of dev_private */ eth_dev->data->mac_addrs = NULL; rte_eth_dev_release_port(eth_dev); } if (sh) mlx5_free_shared_ibctx(sh); assert(err > 0); rte_errno = err; return NULL; } /** * Comparison callback to sort device data. * * This is meant to be used with qsort(). * * @param a[in] * Pointer to pointer to first data object. * @param b[in] * Pointer to pointer to second data object. * * @return * 0 if both objects are equal, less than 0 if the first argument is less * than the second, greater than 0 otherwise. */ static int mlx5_dev_spawn_data_cmp(const void *a, const void *b) { const struct mlx5_switch_info *si_a = &((const struct mlx5_dev_spawn_data *)a)->info; const struct mlx5_switch_info *si_b = &((const struct mlx5_dev_spawn_data *)b)->info; int ret; /* Master device first. */ ret = si_b->master - si_a->master; if (ret) return ret; /* Then representor devices. */ ret = si_b->representor - si_a->representor; if (ret) return ret; /* Unidentified devices come last in no specific order. */ if (!si_a->representor) return 0; /* Order representors by name. */ return si_a->port_name - si_b->port_name; } /** * DPDK callback to register a PCI device. * * This function spawns Ethernet devices out of a given PCI device. * * @param[in] pci_drv * PCI driver structure (mlx5_driver). * @param[in] pci_dev * PCI device information. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ static int mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, struct rte_pci_device *pci_dev) { struct ibv_device **ibv_list; /* * Number of found IB Devices matching with requested PCI BDF. * nd != 1 means there are multiple IB devices over the same * PCI device and we have representors and master. */ unsigned int nd = 0; /* * Number of found IB device Ports. nd = 1 and np = 1..n means * we have the single multiport IB device, and there may be * representors attached to some of found ports. */ unsigned int np = 0; /* * Number of DPDK ethernet devices to Spawn - either over * multiple IB devices or multiple ports of single IB device. * Actually this is the number of iterations to spawn. */ unsigned int ns = 0; struct mlx5_dev_config dev_config; int ret; ret = mlx5_init_once(); if (ret) { DRV_LOG(ERR, "unable to init PMD global data: %s", strerror(rte_errno)); return -rte_errno; } assert(pci_drv == &mlx5_driver); errno = 0; ibv_list = mlx5_glue->get_device_list(&ret); if (!ibv_list) { rte_errno = errno ? errno : ENOSYS; DRV_LOG(ERR, "cannot list devices, is ib_uverbs loaded?"); return -rte_errno; } /* * First scan the list of all Infiniband devices to find * matching ones, gathering into the list. */ struct ibv_device *ibv_match[ret + 1]; int nl_route = -1; int nl_rdma = -1; unsigned int i; while (ret-- > 0) { struct rte_pci_addr pci_addr; DRV_LOG(DEBUG, "checking device \"%s\"", ibv_list[ret]->name); if (mlx5_ibv_device_to_pci_addr(ibv_list[ret], &pci_addr)) continue; if (pci_dev->addr.domain != pci_addr.domain || pci_dev->addr.bus != pci_addr.bus || pci_dev->addr.devid != pci_addr.devid || pci_dev->addr.function != pci_addr.function) continue; DRV_LOG(INFO, "PCI information matches for device \"%s\"", ibv_list[ret]->name); ibv_match[nd++] = ibv_list[ret]; } ibv_match[nd] = NULL; if (!nd) { /* No device matches, just complain and bail out. */ mlx5_glue->free_device_list(ibv_list); DRV_LOG(WARNING, "no Verbs device matches PCI device " PCI_PRI_FMT "," " are kernel drivers loaded?", pci_dev->addr.domain, pci_dev->addr.bus, pci_dev->addr.devid, pci_dev->addr.function); rte_errno = ENOENT; ret = -rte_errno; return ret; } nl_route = mlx5_nl_init(NETLINK_ROUTE); nl_rdma = mlx5_nl_init(NETLINK_RDMA); if (nd == 1) { /* * Found single matching device may have multiple ports. * Each port may be representor, we have to check the port * number and check the representors existence. */ if (nl_rdma >= 0) np = mlx5_nl_portnum(nl_rdma, ibv_match[0]->name); if (!np) DRV_LOG(WARNING, "can not get IB device \"%s\"" " ports number", ibv_match[0]->name); } /* * Now we can determine the maximal * amount of devices to be spawned. */ struct mlx5_dev_spawn_data list[np ? np : nd]; if (np > 1) { /* * Single IB device with multiple ports found, * it may be E-Switch master device and representors. * We have to perform identification trough the ports. */ assert(nl_rdma >= 0); assert(ns == 0); assert(nd == 1); for (i = 1; i <= np; ++i) { list[ns].max_port = np; list[ns].ibv_port = i; list[ns].ibv_dev = ibv_match[0]; list[ns].eth_dev = NULL; list[ns].ifindex = mlx5_nl_ifindex (nl_rdma, list[ns].ibv_dev->name, i); if (!list[ns].ifindex) { /* * No network interface index found for the * specified port, it means there is no * representor on this port. It's OK, * there can be disabled ports, for example * if sriov_numvfs < sriov_totalvfs. */ continue; } ret = -1; if (nl_route >= 0) ret = mlx5_nl_switch_info (nl_route, list[ns].ifindex, &list[ns].info); if (ret || (!list[ns].info.representor && !list[ns].info.master)) { /* * We failed to recognize representors with * Netlink, let's try to perform the task * with sysfs. */ ret = mlx5_sysfs_switch_info (list[ns].ifindex, &list[ns].info); } if (!ret && (list[ns].info.representor ^ list[ns].info.master)) ns++; } if (!ns) { DRV_LOG(ERR, "unable to recognize master/representors" " on the IB device with multiple ports"); rte_errno = ENOENT; ret = -rte_errno; goto exit; } } else { /* * The existence of several matching entries (nd > 1) means * port representors have been instantiated. No existing Verbs * call nor sysfs entries can tell them apart, this can only * be done through Netlink calls assuming kernel drivers are * recent enough to support them. * * In the event of identification failure through Netlink, * try again through sysfs, then: * * 1. A single IB device matches (nd == 1) with single * port (np=0/1) and is not a representor, assume * no switch support. * * 2. Otherwise no safe assumptions can be made; * complain louder and bail out. */ np = 1; for (i = 0; i != nd; ++i) { memset(&list[ns].info, 0, sizeof(list[ns].info)); list[ns].max_port = 1; list[ns].ibv_port = 1; list[ns].ibv_dev = ibv_match[i]; list[ns].eth_dev = NULL; list[ns].ifindex = 0; if (nl_rdma >= 0) list[ns].ifindex = mlx5_nl_ifindex (nl_rdma, list[ns].ibv_dev->name, 1); if (!list[ns].ifindex) { char ifname[IF_NAMESIZE]; /* * Netlink failed, it may happen with old * ib_core kernel driver (before 4.16). * We can assume there is old driver because * here we are processing single ports IB * devices. Let's try sysfs to retrieve * the ifindex. The method works for * master device only. */ if (nd > 1) { /* * Multiple devices found, assume * representors, can not distinguish * master/representor and retrieve * ifindex via sysfs. */ continue; } ret = mlx5_get_master_ifname (ibv_match[i]->ibdev_path, &ifname); if (!ret) list[ns].ifindex = if_nametoindex(ifname); if (!list[ns].ifindex) { /* * No network interface index found * for the specified device, it means * there it is neither representor * nor master. */ continue; } } ret = -1; if (nl_route >= 0) ret = mlx5_nl_switch_info (nl_route, list[ns].ifindex, &list[ns].info); if (ret || (!list[ns].info.representor && !list[ns].info.master)) { /* * We failed to recognize representors with * Netlink, let's try to perform the task * with sysfs. */ ret = mlx5_sysfs_switch_info (list[ns].ifindex, &list[ns].info); } if (!ret && (list[ns].info.representor ^ list[ns].info.master)) { ns++; } else if ((nd == 1) && !list[ns].info.representor && !list[ns].info.master) { /* * Single IB device with * one physical port and * attached network device. * May be SRIOV is not enabled * or there is no representors. */ DRV_LOG(INFO, "no E-Switch support detected"); ns++; break; } } if (!ns) { DRV_LOG(ERR, "unable to recognize master/representors" " on the multiple IB devices"); rte_errno = ENOENT; ret = -rte_errno; goto exit; } } assert(ns); /* * Sort list to probe devices in natural order for users convenience * (i.e. master first, then representors from lowest to highest ID). */ qsort(list, ns, sizeof(*list), mlx5_dev_spawn_data_cmp); /* Default configuration. */ dev_config = (struct mlx5_dev_config){ .hw_padding = 0, .mps = MLX5_ARG_UNSET, .tx_vec_en = 1, .rx_vec_en = 1, .txq_inline = MLX5_ARG_UNSET, .txqs_inline = MLX5_ARG_UNSET, .txqs_vec = MLX5_ARG_UNSET, .inline_max_packet_sz = MLX5_ARG_UNSET, .vf_nl_en = 1, .mr_ext_memseg_en = 1, .mprq = { .enabled = 0, /* Disabled by default. */ .stride_num_n = MLX5_MPRQ_STRIDE_NUM_N, .max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN, .min_rxqs_num = MLX5_MPRQ_MIN_RXQS, }, }; /* Device specific configuration. */ switch (pci_dev->id.device_id) { case PCI_DEVICE_ID_MELLANOX_CONNECTX5BF: dev_config.txqs_vec = MLX5_VPMD_MAX_TXQS_BLUEFIELD; break; case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF: case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF: case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF: case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF: dev_config.vf = 1; break; default: break; } /* Set architecture-dependent default value if unset. */ if (dev_config.txqs_vec == MLX5_ARG_UNSET) dev_config.txqs_vec = MLX5_VPMD_MAX_TXQS; for (i = 0; i != ns; ++i) { uint32_t restore; list[i].eth_dev = mlx5_dev_spawn(&pci_dev->device, &list[i], dev_config); if (!list[i].eth_dev) { if (rte_errno != EBUSY && rte_errno != EEXIST) break; /* Device is disabled or already spawned. Ignore it. */ continue; } restore = list[i].eth_dev->data->dev_flags; rte_eth_copy_pci_info(list[i].eth_dev, pci_dev); /* Restore non-PCI flags cleared by the above call. */ list[i].eth_dev->data->dev_flags |= restore; rte_eth_dev_probing_finish(list[i].eth_dev); } if (i != ns) { DRV_LOG(ERR, "probe of PCI device " PCI_PRI_FMT " aborted after" " encountering an error: %s", pci_dev->addr.domain, pci_dev->addr.bus, pci_dev->addr.devid, pci_dev->addr.function, strerror(rte_errno)); ret = -rte_errno; /* Roll back. */ while (i--) { if (!list[i].eth_dev) continue; mlx5_dev_close(list[i].eth_dev); /* mac_addrs must not be freed because in dev_private */ list[i].eth_dev->data->mac_addrs = NULL; claim_zero(rte_eth_dev_release_port(list[i].eth_dev)); } /* Restore original error. */ rte_errno = -ret; } else { ret = 0; } exit: /* * Do the routine cleanup: * - close opened Netlink sockets * - free the Infiniband device list */ if (nl_rdma >= 0) close(nl_rdma); if (nl_route >= 0) close(nl_route); assert(ibv_list); mlx5_glue->free_device_list(ibv_list); return ret; } /** * DPDK callback to remove a PCI device. * * This function removes all Ethernet devices belong to a given PCI device. * * @param[in] pci_dev * Pointer to the PCI device. * * @return * 0 on success, the function cannot fail. */ static int mlx5_pci_remove(struct rte_pci_device *pci_dev) { uint16_t port_id; RTE_ETH_FOREACH_DEV_OF(port_id, &pci_dev->device) rte_eth_dev_close(port_id); return 0; } static const struct rte_pci_id mlx5_pci_id_map[] = { { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX4) }, { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX4VF) }, { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX4LX) }, { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF) }, { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX5) }, { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX5VF) }, { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX5EX) }, { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF) }, { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX5BF) }, { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF) }, { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX6) }, { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX6VF) }, { .vendor_id = 0 } }; static struct rte_pci_driver mlx5_driver = { .driver = { .name = MLX5_DRIVER_NAME }, .id_table = mlx5_pci_id_map, .probe = mlx5_pci_probe, .remove = mlx5_pci_remove, .dma_map = mlx5_dma_map, .dma_unmap = mlx5_dma_unmap, .drv_flags = (RTE_PCI_DRV_INTR_LSC | RTE_PCI_DRV_INTR_RMV | RTE_PCI_DRV_PROBE_AGAIN), }; #ifdef RTE_IBVERBS_LINK_DLOPEN /** * Suffix RTE_EAL_PMD_PATH with "-glue". * * This function performs a sanity check on RTE_EAL_PMD_PATH before * suffixing its last component. * * @param buf[out] * Output buffer, should be large enough otherwise NULL is returned. * @param size * Size of @p out. * * @return * Pointer to @p buf or @p NULL in case suffix cannot be appended. */ static char * mlx5_glue_path(char *buf, size_t size) { static const char *const bad[] = { "/", ".", "..", NULL }; const char *path = RTE_EAL_PMD_PATH; size_t len = strlen(path); size_t off; int i; while (len && path[len - 1] == '/') --len; for (off = len; off && path[off - 1] != '/'; --off) ; for (i = 0; bad[i]; ++i) if (!strncmp(path + off, bad[i], (int)(len - off))) goto error; i = snprintf(buf, size, "%.*s-glue", (int)len, path); if (i == -1 || (size_t)i >= size) goto error; return buf; error: DRV_LOG(ERR, "unable to append \"-glue\" to last component of" " RTE_EAL_PMD_PATH (\"" RTE_EAL_PMD_PATH "\")," " please re-configure DPDK"); return NULL; } /** * Initialization routine for run-time dependency on rdma-core. */ static int mlx5_glue_init(void) { char glue_path[sizeof(RTE_EAL_PMD_PATH) - 1 + sizeof("-glue")]; const char *path[] = { /* * A basic security check is necessary before trusting * MLX5_GLUE_PATH, which may override RTE_EAL_PMD_PATH. */ (geteuid() == getuid() && getegid() == getgid() ? getenv("MLX5_GLUE_PATH") : NULL), /* * When RTE_EAL_PMD_PATH is set, use its glue-suffixed * variant, otherwise let dlopen() look up libraries on its * own. */ (*RTE_EAL_PMD_PATH ? mlx5_glue_path(glue_path, sizeof(glue_path)) : ""), }; unsigned int i = 0; void *handle = NULL; void **sym; const char *dlmsg; while (!handle && i != RTE_DIM(path)) { const char *end; size_t len; int ret; if (!path[i]) { ++i; continue; } end = strpbrk(path[i], ":;"); if (!end) end = path[i] + strlen(path[i]); len = end - path[i]; ret = 0; do { char name[ret + 1]; ret = snprintf(name, sizeof(name), "%.*s%s" MLX5_GLUE, (int)len, path[i], (!len || *(end - 1) == '/') ? "" : "/"); if (ret == -1) break; if (sizeof(name) != (size_t)ret + 1) continue; DRV_LOG(DEBUG, "looking for rdma-core glue as \"%s\"", name); handle = dlopen(name, RTLD_LAZY); break; } while (1); path[i] = end + 1; if (!*end) ++i; } if (!handle) { rte_errno = EINVAL; dlmsg = dlerror(); if (dlmsg) DRV_LOG(WARNING, "cannot load glue library: %s", dlmsg); goto glue_error; } sym = dlsym(handle, "mlx5_glue"); if (!sym || !*sym) { rte_errno = EINVAL; dlmsg = dlerror(); if (dlmsg) DRV_LOG(ERR, "cannot resolve glue symbol: %s", dlmsg); goto glue_error; } mlx5_glue = *sym; return 0; glue_error: if (handle) dlclose(handle); DRV_LOG(WARNING, "cannot initialize PMD due to missing run-time dependency on" " rdma-core libraries (libibverbs, libmlx5)"); return -rte_errno; } #endif /** * Driver initialization routine. */ RTE_INIT(rte_mlx5_pmd_init) { /* Initialize driver log type. */ mlx5_logtype = rte_log_register("pmd.net.mlx5"); if (mlx5_logtype >= 0) rte_log_set_level(mlx5_logtype, RTE_LOG_NOTICE); /* Build the static tables for Verbs conversion. */ mlx5_set_ptype_table(); mlx5_set_cksum_table(); mlx5_set_swp_types_table(); /* * RDMAV_HUGEPAGES_SAFE tells ibv_fork_init() we intend to use * huge pages. Calling ibv_fork_init() during init allows * applications to use fork() safely for purposes other than * using this PMD, which is not supported in forked processes. */ setenv("RDMAV_HUGEPAGES_SAFE", "1", 1); /* Match the size of Rx completion entry to the size of a cacheline. */ if (RTE_CACHE_LINE_SIZE == 128) setenv("MLX5_CQE_SIZE", "128", 0); /* * MLX5_DEVICE_FATAL_CLEANUP tells ibv_destroy functions to * cleanup all the Verbs resources even when the device was removed. */ setenv("MLX5_DEVICE_FATAL_CLEANUP", "1", 1); #ifdef RTE_IBVERBS_LINK_DLOPEN if (mlx5_glue_init()) return; assert(mlx5_glue); #endif #ifndef NDEBUG /* Glue structure must not contain any NULL pointers. */ { unsigned int i; for (i = 0; i != sizeof(*mlx5_glue) / sizeof(void *); ++i) assert(((const void *const *)mlx5_glue)[i]); } #endif if (strcmp(mlx5_glue->version, MLX5_GLUE_VERSION)) { DRV_LOG(ERR, "rdma-core glue \"%s\" mismatch: \"%s\" is required", mlx5_glue->version, MLX5_GLUE_VERSION); return; } mlx5_glue->fork_init(); rte_pci_register(&mlx5_driver); } RTE_PMD_EXPORT_NAME(net_mlx5, __COUNTER__); RTE_PMD_REGISTER_PCI_TABLE(net_mlx5, mlx5_pci_id_map); RTE_PMD_REGISTER_KMOD_DEP(net_mlx5, "* ib_uverbs & mlx5_core & mlx5_ib");