summaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
authorLudovic Desroches <ludovic.desroches@atmel.com>2016-04-28 14:59:26 +0200
committerUlf Hansson <ulf.hansson@linaro.org>2016-05-04 09:28:03 +0200
commit4406433dec687c54be48a18a71dd28acb319137e (patch)
tree4490cfce5f9a6f9efacba21a788afae2ff8c6166 /drivers/mmc
parent488aab3d0c02b77d8d8f63a6abddb9d8beeea11a (diff)
mmc: sdhci-of-at91: add presets setup
The controller claims to support SDR104. In fact, it only supports a degraded SDR104 since the maximum frequency of the SD clock is 120 MHz instead of 208 MHz. The sdhci core is unaware of it and will compute a wrong clock divider. We can deal with this specific case by using presets. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/host/sdhci-of-at91.c26
1 files changed, 26 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index c1923c094ff6..25f779e09d8e 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -18,6 +18,7 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/kernel.h>
#include <linux/mmc/host.h>
#include <linux/mmc/slot-gpio.h>
#include <linux/module.h>
@@ -32,6 +33,8 @@
#define SDMMC_CACR_CAPWREN BIT(0)
#define SDMMC_CACR_KEY (0x46 << 8)
+#define SDHCI_AT91_PRESET_COMMON_CONF 0x400 /* drv type B, programmable clock mode */
+
struct sdhci_at91_priv {
struct clk *hclock;
struct clk *gck;
@@ -163,6 +166,7 @@ static int sdhci_at91_probe(struct platform_device *pdev)
unsigned int clk_base, clk_mul;
unsigned int gck_rate, real_gck_rate;
int ret;
+ unsigned int preset_div;
match = of_match_device(sdhci_at91_dt_match, &pdev->dev);
if (!match)
@@ -230,6 +234,28 @@ static int sdhci_at91_probe(struct platform_device *pdev)
clk_mul, real_gck_rate);
}
+ /*
+ * We have to set preset values because it depends on the clk_mul
+ * value. Moreover, SDR104 is supported in a degraded mode since the
+ * maximum sd clock value is 120 MHz instead of 208 MHz. For that
+ * reason, we need to use presets to support SDR104.
+ */
+ preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1;
+ writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+ host->ioaddr + SDHCI_PRESET_FOR_SDR12);
+ preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
+ writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+ host->ioaddr + SDHCI_PRESET_FOR_SDR25);
+ preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1;
+ writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+ host->ioaddr + SDHCI_PRESET_FOR_SDR50);
+ preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1;
+ writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+ host->ioaddr + SDHCI_PRESET_FOR_SDR104);
+ preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
+ writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+ host->ioaddr + SDHCI_PRESET_FOR_DDR50);
+
clk_prepare_enable(priv->mainck);
clk_prepare_enable(priv->gck);