summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/pinctrl-tegra.c
diff options
context:
space:
mode:
authorPritesh Raithatha <praithatha@nvidia.com>2013-01-08 13:02:36 +0530
committerLinus Walleij <linus.walleij@linaro.org>2013-01-18 16:13:52 +0100
commit348d1bf75c09f854630e9bd161dc2a88aebe2149 (patch)
treeb7f3fd0f286d8191584c8d2f0200a29121e1acf2 /drivers/pinctrl/pinctrl-tegra.c
parentb2083062a3b4035e85349120b426ecef2b6d155f (diff)
pinctrl: tegra: add support for rcv-sel and drive type
NVIDIA's Tegra114 added two more configuration parameter in pinmux i.e. rcv-sel and drive type. rcv-sel: Select between High and Normal VIL/VIH receivers. RCVR_SEL=1: High VIL/VIH RCVR_SEL=0: Normal VIL/VIH drv_type: Ouptput drive type: 33-50 ohm driver: 0x1 66-100ohm driver: 0x0 Add support of these parameters to be configure from DTS file. Tegra20 and Tegra30 does not support this configuration and hence initialize their pinmux structure with reg = -1. Originally written by Pritesh Raithatha. Changes by ldewangan: - remove drvtype_width as it is always 2. - Better describe the change. Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl/pinctrl-tegra.c')
-rw-r--r--drivers/pinctrl/pinctrl-tegra.c14
1 files changed, 14 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c
index ae1e4bb3259d..f195d77a3572 100644
--- a/drivers/pinctrl/pinctrl-tegra.c
+++ b/drivers/pinctrl/pinctrl-tegra.c
@@ -201,6 +201,7 @@ static const struct cfg_param {
{"nvidia,open-drain", TEGRA_PINCONF_PARAM_OPEN_DRAIN},
{"nvidia,lock", TEGRA_PINCONF_PARAM_LOCK},
{"nvidia,io-reset", TEGRA_PINCONF_PARAM_IORESET},
+ {"nvidia,rcv-sel", TEGRA_PINCONF_PARAM_RCV_SEL},
{"nvidia,high-speed-mode", TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE},
{"nvidia,schmitt", TEGRA_PINCONF_PARAM_SCHMITT},
{"nvidia,low-power-mode", TEGRA_PINCONF_PARAM_LOW_POWER_MODE},
@@ -208,6 +209,7 @@ static const struct cfg_param {
{"nvidia,pull-up-strength", TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH},
{"nvidia,slew-rate-falling", TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING},
{"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING},
+ {"nvidia,drive-type", TEGRA_PINCONF_PARAM_DRIVE_TYPE},
};
static int tegra_pinctrl_dt_subnode_to_map(struct device *dev,
@@ -450,6 +452,12 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx,
*bit = g->ioreset_bit;
*width = 1;
break;
+ case TEGRA_PINCONF_PARAM_RCV_SEL:
+ *bank = g->rcv_sel_bank;
+ *reg = g->rcv_sel_reg;
+ *bit = g->rcv_sel_bit;
+ *width = 1;
+ break;
case TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE:
*bank = g->drv_bank;
*reg = g->drv_reg;
@@ -492,6 +500,12 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx,
*bit = g->slwr_bit;
*width = g->slwr_width;
break;
+ case TEGRA_PINCONF_PARAM_DRIVE_TYPE:
+ *bank = g->drvtype_bank;
+ *reg = g->drvtype_reg;
+ *bit = g->drvtype_bit;
+ *width = 2;
+ break;
default:
dev_err(pmx->dev, "Invalid config param %04x\n", param);
return -ENOTSUPP;