diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/temperature')
-rw-r--r-- | Documentation/devicetree/bindings/iio/temperature/max31856.txt | 24 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt | 7 |
2 files changed, 31 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/temperature/max31856.txt b/Documentation/devicetree/bindings/iio/temperature/max31856.txt new file mode 100644 index 000000000000..06ab43bb4de8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/max31856.txt @@ -0,0 +1,24 @@ +Maxim MAX31856 thermocouple support + +https://datasheets.maximintegrated.com/en/ds/MAX31856.pdf + +Optional property: + - thermocouple-type: Type of thermocouple (THERMOCOUPLE_TYPE_K if + omitted). Supported types are B, E, J, K, N, R, S, T. + +Required properties: + - compatible: must be "maxim,max31856" + - reg: SPI chip select number for the device + - spi-max-frequency: As per datasheet max. supported freq is 5000000 + - spi-cpha: must be defined for max31856 to enable SPI mode 1 + + Refer to spi/spi-bus.txt for generic SPI slave bindings. + + Example: + temp-sensor@0 { + compatible = "maxim,max31856"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + thermocouple-type = <THERMOCOUPLE_TYPE_K>; + }; diff --git a/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt b/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt new file mode 100644 index 000000000000..8f339cab74ae --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt @@ -0,0 +1,7 @@ +If the temperature sensor device can be configured to use some specific +thermocouple type, you can use the defined types provided in the file +"include/dt-bindings/iio/temperature/thermocouple.h". + +Property: +thermocouple-type: A single cell representing the type of the thermocouple + used by the device. |