diff options
Diffstat (limited to 'Documentation/devicetree/bindings/media/samsung-s5k5baf.txt')
-rw-r--r-- | Documentation/devicetree/bindings/media/samsung-s5k5baf.txt | 58 |
1 files changed, 0 insertions, 58 deletions
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt deleted file mode 100644 index 1f51e0439c96..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt +++ /dev/null @@ -1,58 +0,0 @@ -Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP --------------------------------------------------------------------- - -Required properties: - -- compatible : "samsung,s5k5baf"; -- reg : I2C slave address of the sensor; -- vdda-supply : analog power supply 2.8V (2.6V to 3.0V); -- vddreg-supply : regulator input power supply 1.8V (1.7V to 1.9V) - or 2.8V (2.6V to 3.0); -- vddio-supply : I/O power supply 1.8V (1.65V to 1.95V) - or 2.8V (2.5V to 3.1V); -- stbyn-gpios : GPIO connected to STDBYN pin; -- rstn-gpios : GPIO connected to RSTN pin; -- clocks : list of phandle and clock specifier pairs - according to common clock bindings for the - clocks described in clock-names; -- clock-names : should include "mclk" for the sensor's master clock; - -Optional properties: - -- clock-frequency : the frequency at which the "mclk" clock should be - configured to operate, in Hz; if this property is not - specified default 24 MHz value will be used. - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -media/video-interfaces.txt. The following are properties specific to those -nodes. - -endpoint node -------------- - -- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in - video-interfaces.txt. If present it should be <1> - the device - supports only one data lane without re-mapping. - -Example: - -s5k5bafx@2d { - compatible = "samsung,s5k5baf"; - reg = <0x2d>; - vdda-supply = <&cam_io_en_reg>; - vddreg-supply = <&vt_core_15v_reg>; - vddio-supply = <&vtcam_reg>; - stbyn-gpios = <&gpl2 0 1>; - rstn-gpios = <&gpl2 1 1>; - clock-names = "mclk"; - clocks = <&clock_cam 0>; - clock-frequency = <24000000>; - - port { - s5k5bafx_ep: endpoint { - remote-endpoint = <&csis1_ep>; - data-lanes = <1>; - }; - }; -}; |