diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/denali-nand.txt')
-rw-r--r-- | Documentation/devicetree/bindings/mtd/denali-nand.txt | 40 |
1 files changed, 27 insertions, 13 deletions
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index f33da8782741..b14b6751c2f3 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -7,34 +7,48 @@ Required properties: "socionext,uniphier-denali-nand-v5b" - for Socionext UniPhier (v5b) - reg : should contain registers location and length for data and reg. - reg-names: Should contain the reg names "nand_data" and "denali_reg" + - #address-cells: should be 1. The cell encodes the chip select connection. + - #size-cells : should be 0. - interrupts : The interrupt number. - clocks: should contain phandle of the controller core clock, the bus interface clock, and the ECC circuit clock. - clock-names: should contain "nand", "nand_x", "ecc" -Optional properties: - - nand-ecc-step-size: see nand.txt for details. If present, the value must be - 512 for "altr,socfpga-denali-nand" - 1024 for "socionext,uniphier-denali-nand-v5a" - 1024 for "socionext,uniphier-denali-nand-v5b" - - nand-ecc-strength: see nand.txt for details. Valid values are: - 8, 15 for "altr,socfpga-denali-nand" - 8, 16, 24 for "socionext,uniphier-denali-nand-v5a" - 8, 16 for "socionext,uniphier-denali-nand-v5b" - - nand-ecc-maximize: see nand.txt for details - -The device tree may optionally contain sub-nodes describing partitions of the +Sub-nodes: + Sub-nodes represent available NAND chips. + + Required properties: + - reg: should contain the bank ID of the controller to which each chip + select is connected. + + Optional properties: + - nand-ecc-step-size: see nand.txt for details. + If present, the value must be + 512 for "altr,socfpga-denali-nand" + 1024 for "socionext,uniphier-denali-nand-v5a" + 1024 for "socionext,uniphier-denali-nand-v5b" + - nand-ecc-strength: see nand.txt for details. Valid values are: + 8, 15 for "altr,socfpga-denali-nand" + 8, 16, 24 for "socionext,uniphier-denali-nand-v5a" + 8, 16 for "socionext,uniphier-denali-nand-v5b" + - nand-ecc-maximize: see nand.txt for details + +The chip nodes may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. Examples: nand: nand@ff900000 { #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; compatible = "altr,socfpga-denali-nand"; reg = <0xff900000 0x20>, <0xffb80000 0x1000>; reg-names = "nand_data", "denali_reg"; clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; clock-names = "nand", "nand_x", "ecc"; interrupts = <0 144 4>; + + nand@0 { + reg = <0>; + } }; |