diff options
Diffstat (limited to 'Documentation/devicetree/bindings/sound/wlf,wm8994.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/sound/wlf,wm8994.yaml | 194 |
1 files changed, 194 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml new file mode 100644 index 000000000000..8f045de02850 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8994.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM1811/WM8994/WM8958 audio codecs + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - patches@opensource.cirrus.com + +description: | + These devices support both I2C and SPI (configured with pin strapping on the + board). + + Pins on the device (for linking into audio routes): + IN1LN, IN1LP, IN2LN, IN2LP:VXRN, IN1RN, IN1RP, IN2RN, IN2RP:VXRP, SPKOUTLP, + SPKOUTLN, SPKOUTRP, SPKOUTRN, HPOUT1L, HPOUT1R, HPOUT2P, HPOUT2N, LINEOUT1P, + LINEOUT1N, LINEOUT2P, LINEOUT2N. + +properties: + compatible: + enum: + - wlf,wm1811 + - wlf,wm8994 + - wlf,wm8958 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: MCLK1 + - const: MCLK2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: + The first cell is the IRQ number. The second cell is the flags, encoded + as the trigger masks. + + AVDD1-supply: true + AVDD2-supply: true + CPVDD-supply: true + DBVDD-supply: true + DBVDD1-supply: true + DBVDD2-supply: true + DBVDD3-supply: true + DCVDD-supply: true + LDO1VDD-supply: true + LDO2VDD-supply: true + SPKVDD1-supply: true + SPKVDD2-supply: true + + '#sound-dai-cells': + const: 0 + + wlf,gpio-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 11 + description: + A list of GPIO configuration register values. If absent, no configuration + of these registers is performed. If any value is over 0xffff then the + register will be left as default. If present 11 values must be supplied. + + wlf,micbias-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + description: + Two MICBIAS register values for WM1811 or WM8958. If absent the register + defaults will be used. + + wlf,ldo1ena-gpios: + maxItems: 1 + description: + Control of LDO1ENA input to device. + + wlf,ldo2ena-gpios: + maxItems: 1 + description: + Control of LDO2ENA input to device. + + wlf,lineout1-se: + type: boolean + description: + LINEOUT1 is in single ended mode. + + wlf,lineout2-se: + type: boolean + description: + INEOUT2 is in single ended mode. + + wlf,lineout1-feedback: + type: boolean + description: + LINEOUT1 has common mode feedback connected. + + wlf,lineout2-feedback: + type: boolean + description: + LINEOUT2 has common mode feedback connected. + + wlf,ldoena-always-driven: + type: boolean + description: + LDOENA is always driven. + + wlf,spkmode-pu: + type: boolean + description: + Enable the internal pull-up resistor on the SPKMODE pin. + + wlf,csnaddr-pd: + type: boolean + description: + Enable the internal pull-down resistor on the CS/ADDR pin. + +required: + - compatible + - reg + - AVDD2-supply + - CPVDD-supply + - SPKVDD1-supply + - SPKVDD2-supply + +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + enum: + - wlf,wm1811 + - wlf,wm8958 + then: + properties: + DBVDD-supply: false + LDO2VDD-supply: false + required: + - DBVDD1-supply + - DBVDD2-supply + - DBVDD3-supply + else: + properties: + DBVDD1-supply: false + DBVDD2-supply: false + DBVDD3-supply: false + required: + - DBVDD-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + clocks = <&i2s0 0>; + clock-names = "MCLK1"; + + AVDD2-supply = <&main_dc_reg>; + CPVDD-supply = <&main_dc_reg>; + DBVDD1-supply = <&main_dc_reg>; + DBVDD2-supply = <&main_dc_reg>; + DBVDD3-supply = <&main_dc_reg>; + LDO1VDD-supply = <&main_dc_reg>; + SPKVDD1-supply = <&main_dc_reg>; + SPKVDD2-supply = <&main_dc_reg>; + + wlf,ldo1ena-gpios = <&gpb0 0 GPIO_ACTIVE_HIGH>; + wlf,ldo2ena-gpios = <&gpb0 1 GPIO_ACTIVE_HIGH>; + }; + }; |