summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/apic/vector.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/apic/vector.c')
-rw-r--r--arch/x86/kernel/apic/vector.c88
1 files changed, 70 insertions, 18 deletions
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index 3b670df4ba7b..ad59d70bcb1a 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -213,6 +213,7 @@ update:
*/
cpumask_and(d->old_domain, d->old_domain, cpu_online_mask);
d->move_in_progress = !cpumask_empty(d->old_domain);
+ d->cfg.old_vector = d->move_in_progress ? d->cfg.vector : 0;
d->cfg.vector = vector;
cpumask_copy(d->domain, vector_cpumask);
success:
@@ -655,46 +656,97 @@ void irq_complete_move(struct irq_cfg *cfg)
}
/*
- * Called with @desc->lock held and interrupts disabled.
+ * Called from fixup_irqs() with @desc->lock held and interrupts disabled.
*/
void irq_force_complete_move(struct irq_desc *desc)
{
struct irq_data *irqdata = irq_desc_get_irq_data(desc);
struct apic_chip_data *data = apic_chip_data(irqdata);
struct irq_cfg *cfg = data ? &data->cfg : NULL;
+ unsigned int cpu;
if (!cfg)
return;
- __irq_complete_move(cfg, cfg->vector);
-
/*
* This is tricky. If the cleanup of @data->old_domain has not been
* done yet, then the following setaffinity call will fail with
* -EBUSY. This can leave the interrupt in a stale state.
*
- * The cleanup cannot make progress because we hold @desc->lock. So in
- * case @data->old_domain is not yet cleaned up, we need to drop the
- * lock and acquire it again. @desc cannot go away, because the
- * hotplug code holds the sparse irq lock.
+ * All CPUs are stuck in stop machine with interrupts disabled so
+ * calling __irq_complete_move() would be completely pointless.
*/
raw_spin_lock(&vector_lock);
- /* Clean out all offline cpus (including ourself) first. */
+ /*
+ * Clean out all offline cpus (including the outgoing one) from the
+ * old_domain mask.
+ */
cpumask_and(data->old_domain, data->old_domain, cpu_online_mask);
- while (!cpumask_empty(data->old_domain)) {
+
+ /*
+ * If move_in_progress is cleared and the old_domain mask is empty,
+ * then there is nothing to cleanup. fixup_irqs() will take care of
+ * the stale vectors on the outgoing cpu.
+ */
+ if (!data->move_in_progress && cpumask_empty(data->old_domain)) {
raw_spin_unlock(&vector_lock);
- raw_spin_unlock(&desc->lock);
- cpu_relax();
- raw_spin_lock(&desc->lock);
+ return;
+ }
+
+ /*
+ * 1) The interrupt is in move_in_progress state. That means that we
+ * have not seen an interrupt since the io_apic was reprogrammed to
+ * the new vector.
+ *
+ * 2) The interrupt has fired on the new vector, but the cleanup IPIs
+ * have not been processed yet.
+ */
+ if (data->move_in_progress) {
/*
- * Reevaluate apic_chip_data. It might have been cleared after
- * we dropped @desc->lock.
+ * In theory there is a race:
+ *
+ * set_ioapic(new_vector) <-- Interrupt is raised before update
+ * is effective, i.e. it's raised on
+ * the old vector.
+ *
+ * So if the target cpu cannot handle that interrupt before
+ * the old vector is cleaned up, we get a spurious interrupt
+ * and in the worst case the ioapic irq line becomes stale.
+ *
+ * But in case of cpu hotplug this should be a non issue
+ * because if the affinity update happens right before all
+ * cpus rendevouz in stop machine, there is no way that the
+ * interrupt can be blocked on the target cpu because all cpus
+ * loops first with interrupts enabled in stop machine, so the
+ * old vector is not yet cleaned up when the interrupt fires.
+ *
+ * So the only way to run into this issue is if the delivery
+ * of the interrupt on the apic/system bus would be delayed
+ * beyond the point where the target cpu disables interrupts
+ * in stop machine. I doubt that it can happen, but at least
+ * there is a theroretical chance. Virtualization might be
+ * able to expose this, but AFAICT the IOAPIC emulation is not
+ * as stupid as the real hardware.
+ *
+ * Anyway, there is nothing we can do about that at this point
+ * w/o refactoring the whole fixup_irq() business completely.
+ * We print at least the irq number and the old vector number,
+ * so we have the necessary information when a problem in that
+ * area arises.
*/
- data = apic_chip_data(irqdata);
- if (!data)
- return;
- raw_spin_lock(&vector_lock);
+ pr_warn("IRQ fixup: irq %d move in progress, old vector %d\n",
+ irqdata->irq, cfg->old_vector);
}
+ /*
+ * If old_domain is not empty, then other cpus still have the irq
+ * descriptor set in their vector array. Clean it up.
+ */
+ for_each_cpu(cpu, data->old_domain)
+ per_cpu(vector_irq, cpu)[cfg->old_vector] = VECTOR_UNUSED;
+
+ /* Cleanup the left overs of the (half finished) move */
+ cpumask_clear(data->old_domain);
+ data->move_in_progress = 0;
raw_spin_unlock(&vector_lock);
}
#endif