summaryrefslogtreecommitdiff
path: root/drivers/ata/libata-scsi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/libata-scsi.c')
-rw-r--r--drivers/ata/libata-scsi.c60
1 files changed, 49 insertions, 11 deletions
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 7cc5a4a910a4..73902d335767 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -273,8 +273,8 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
{
int rc = 0;
u8 scsi_cmd[MAX_COMMAND_SIZE];
- u8 args[7];
- struct scsi_sense_hdr sshdr;
+ u8 args[7], *sensebuf = NULL;
+ int cmd_result;
if (arg == NULL)
return -EINVAL;
@@ -282,10 +282,14 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
if (copy_from_user(args, arg, sizeof(args)))
return -EFAULT;
+ sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
+ if (!sensebuf)
+ return -ENOMEM;
+
memset(scsi_cmd, 0, sizeof(scsi_cmd));
scsi_cmd[0] = ATA_16;
scsi_cmd[1] = (3 << 1); /* Non-data */
- /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */
scsi_cmd[4] = args[1];
scsi_cmd[6] = args[2];
scsi_cmd[8] = args[3];
@@ -295,11 +299,46 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
/* Good values for timeout and retries? Values below
from scsi_ioctl_send_command() for default case... */
- if (scsi_execute_req(scsidev, scsi_cmd, DMA_NONE, NULL, 0, &sshdr,
- (10*HZ), 5))
+ cmd_result = scsi_execute(scsidev, scsi_cmd, DMA_NONE, NULL, 0,
+ sensebuf, (10*HZ), 5, 0);
+
+ if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */
+ u8 *desc = sensebuf + 8;
+ cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
+
+ /* If we set cc then ATA pass-through will cause a
+ * check condition even if no error. Filter that. */
+ if (cmd_result & SAM_STAT_CHECK_CONDITION) {
+ struct scsi_sense_hdr sshdr;
+ scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE,
+ &sshdr);
+ if (sshdr.sense_key==0 &&
+ sshdr.asc==0 && sshdr.ascq==0)
+ cmd_result &= ~SAM_STAT_CHECK_CONDITION;
+ }
+
+ /* Send userspace ATA registers */
+ if (sensebuf[0] == 0x72 && /* format is "descriptor" */
+ desc[0] == 0x09) {/* code is "ATA Descriptor" */
+ args[0] = desc[13]; /* status */
+ args[1] = desc[3]; /* error */
+ args[2] = desc[5]; /* sector count (0:7) */
+ args[3] = desc[7]; /* lbal */
+ args[4] = desc[9]; /* lbam */
+ args[5] = desc[11]; /* lbah */
+ args[6] = desc[12]; /* select */
+ if (copy_to_user(arg, args, sizeof(args)))
+ rc = -EFAULT;
+ }
+ }
+
+ if (cmd_result) {
rc = -EIO;
+ goto error;
+ }
- /* Need code to retrieve data from check condition? */
+ error:
+ kfree(sensebuf);
return rc;
}
@@ -983,11 +1022,10 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
}
tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
- } else {
- tf->nsect = 0; /* time period value (0 implies now) */
- tf->command = ATA_CMD_STANDBY;
- /* Consider: ATA STANDBY IMMEDIATE command */
- }
+ } else
+ /* Issue ATA STANDBY IMMEDIATE command */
+ tf->command = ATA_CMD_STANDBYNOW1;
+
/*
* Standby and Idle condition timers could be implemented but that
* would require libata to implement the Power condition mode page