summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-rcar.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpio/gpio-rcar.c')
-rw-r--r--drivers/gpio/gpio-rcar.c87
1 files changed, 58 insertions, 29 deletions
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index 3ef19cef8da9..0b572dbc4a36 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -32,6 +32,11 @@ struct gpio_rcar_bank_info {
u32 intmsk;
};
+struct gpio_rcar_info {
+ bool has_outdtsel;
+ bool has_both_edge_trigger;
+};
+
struct gpio_rcar_priv {
void __iomem *base;
spinlock_t lock;
@@ -40,24 +45,23 @@ struct gpio_rcar_priv {
struct irq_chip irq_chip;
unsigned int irq_parent;
atomic_t wakeup_path;
- bool has_outdtsel;
- bool has_both_edge_trigger;
+ struct gpio_rcar_info info;
struct gpio_rcar_bank_info bank_info;
};
-#define IOINTSEL 0x00 /* General IO/Interrupt Switching Register */
-#define INOUTSEL 0x04 /* General Input/Output Switching Register */
-#define OUTDT 0x08 /* General Output Register */
-#define INDT 0x0c /* General Input Register */
-#define INTDT 0x10 /* Interrupt Display Register */
-#define INTCLR 0x14 /* Interrupt Clear Register */
-#define INTMSK 0x18 /* Interrupt Mask Register */
-#define MSKCLR 0x1c /* Interrupt Mask Clear Register */
-#define POSNEG 0x20 /* Positive/Negative Logic Select Register */
-#define EDGLEVEL 0x24 /* Edge/level Select Register */
-#define FILONOFF 0x28 /* Chattering Prevention On/Off Register */
-#define OUTDTSEL 0x40 /* Output Data Select Register */
-#define BOTHEDGE 0x4c /* One Edge/Both Edge Select Register */
+#define IOINTSEL 0x00 /* General IO/Interrupt Switching Register */
+#define INOUTSEL 0x04 /* General Input/Output Switching Register */
+#define OUTDT 0x08 /* General Output Register */
+#define INDT 0x0c /* General Input Register */
+#define INTDT 0x10 /* Interrupt Display Register */
+#define INTCLR 0x14 /* Interrupt Clear Register */
+#define INTMSK 0x18 /* Interrupt Mask Register */
+#define MSKCLR 0x1c /* Interrupt Mask Clear Register */
+#define POSNEG 0x20 /* Positive/Negative Logic Select Register */
+#define EDGLEVEL 0x24 /* Edge/level Select Register */
+#define FILONOFF 0x28 /* Chattering Prevention On/Off Register */
+#define OUTDTSEL 0x40 /* Output Data Select Register */
+#define BOTHEDGE 0x4c /* One Edge/Both Edge Select Register */
#define RCAR_MAX_GPIO_PER_BANK 32
@@ -123,7 +127,7 @@ static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger);
/* Select one edge or both edges in BOTHEDGE */
- if (p->has_both_edge_trigger)
+ if (p->info.has_both_edge_trigger)
gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both);
/* Select "Interrupt Input Mode" in IOINTSEL */
@@ -162,7 +166,7 @@ static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
false);
break;
case IRQ_TYPE_EDGE_BOTH:
- if (!p->has_both_edge_trigger)
+ if (!p->info.has_both_edge_trigger)
return -EINVAL;
gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
true);
@@ -238,7 +242,7 @@ static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip,
gpio_rcar_modify_bit(p, INOUTSEL, gpio, output);
/* Select General Output Register to output data in OUTDTSEL */
- if (p->has_outdtsel && output)
+ if (p->info.has_outdtsel && output)
gpio_rcar_modify_bit(p, OUTDTSEL, gpio, false);
spin_unlock_irqrestore(&p->lock, flags);
@@ -295,14 +299,44 @@ static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset)
static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset)
{
+ struct gpio_rcar_priv *p = gpiochip_get_data(chip);
u32 bit = BIT(offset);
/* testing on r8a7790 shows that INDT does not show correct pin state
* when configured as output, so use OUTDT in case of output pins */
- if (gpio_rcar_read(gpiochip_get_data(chip), INOUTSEL) & bit)
- return !!(gpio_rcar_read(gpiochip_get_data(chip), OUTDT) & bit);
+ if (gpio_rcar_read(p, INOUTSEL) & bit)
+ return !!(gpio_rcar_read(p, OUTDT) & bit);
else
- return !!(gpio_rcar_read(gpiochip_get_data(chip), INDT) & bit);
+ return !!(gpio_rcar_read(p, INDT) & bit);
+}
+
+static int gpio_rcar_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct gpio_rcar_priv *p = gpiochip_get_data(chip);
+ u32 bankmask, outputs, m, val = 0;
+ unsigned long flags;
+
+ bankmask = mask[0] & GENMASK(chip->ngpio - 1, 0);
+ if (chip->valid_mask)
+ bankmask &= chip->valid_mask[0];
+
+ if (!bankmask)
+ return 0;
+
+ spin_lock_irqsave(&p->lock, flags);
+ outputs = gpio_rcar_read(p, INOUTSEL);
+ m = outputs & bankmask;
+ if (m)
+ val |= gpio_rcar_read(p, OUTDT) & m;
+
+ m = ~outputs & bankmask;
+ if (m)
+ val |= gpio_rcar_read(p, INDT) & m;
+ spin_unlock_irqrestore(&p->lock, flags);
+
+ bits[0] = val;
+ return 0;
}
static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value)
@@ -346,11 +380,6 @@ static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset,
return 0;
}
-struct gpio_rcar_info {
- bool has_outdtsel;
- bool has_both_edge_trigger;
-};
-
static const struct gpio_rcar_info gpio_rcar_info_gen1 = {
.has_outdtsel = false,
.has_both_edge_trigger = false,
@@ -417,8 +446,7 @@ static int gpio_rcar_parse_dt(struct gpio_rcar_priv *p, unsigned int *npins)
int ret;
info = of_device_get_match_data(p->dev);
- p->has_outdtsel = info->has_outdtsel;
- p->has_both_edge_trigger = info->has_both_edge_trigger;
+ p->info = *info;
ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args);
*npins = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK;
@@ -479,6 +507,7 @@ static int gpio_rcar_probe(struct platform_device *pdev)
gpio_chip->get_direction = gpio_rcar_get_direction;
gpio_chip->direction_input = gpio_rcar_direction_input;
gpio_chip->get = gpio_rcar_get;
+ gpio_chip->get_multiple = gpio_rcar_get_multiple;
gpio_chip->direction_output = gpio_rcar_direction_output;
gpio_chip->set = gpio_rcar_set;
gpio_chip->set_multiple = gpio_rcar_set_multiple;
@@ -552,7 +581,7 @@ static int gpio_rcar_suspend(struct device *dev)
p->bank_info.intmsk = gpio_rcar_read(p, INTMSK);
p->bank_info.posneg = gpio_rcar_read(p, POSNEG);
p->bank_info.edglevel = gpio_rcar_read(p, EDGLEVEL);
- if (p->has_both_edge_trigger)
+ if (p->info.has_both_edge_trigger)
p->bank_info.bothedge = gpio_rcar_read(p, BOTHEDGE);
if (atomic_read(&p->wakeup_path))