diff options
Diffstat (limited to 'drivers/irqchip/irq-riscv-aplic-main.c')
| -rw-r--r-- | drivers/irqchip/irq-riscv-aplic-main.c | 75 |
1 files changed, 49 insertions, 26 deletions
diff --git a/drivers/irqchip/irq-riscv-aplic-main.c b/drivers/irqchip/irq-riscv-aplic-main.c index 28dd175b5764..900e72541db9 100644 --- a/drivers/irqchip/irq-riscv-aplic-main.c +++ b/drivers/irqchip/irq-riscv-aplic-main.c @@ -4,8 +4,10 @@ * Copyright (C) 2022 Ventana Micro Systems Inc. */ +#include <linux/acpi.h> #include <linux/bitfield.h> #include <linux/irqchip/riscv-aplic.h> +#include <linux/irqchip/riscv-imsic.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_irq.h> @@ -125,39 +127,50 @@ static void aplic_init_hw_irqs(struct aplic_priv *priv) writel(0, priv->regs + APLIC_DOMAINCFG); } +#ifdef CONFIG_ACPI +static const struct acpi_device_id aplic_acpi_match[] = { + { "RSCV0002", 0 }, + {} +}; +MODULE_DEVICE_TABLE(acpi, aplic_acpi_match); + +#endif + int aplic_setup_priv(struct aplic_priv *priv, struct device *dev, void __iomem *regs) { struct device_node *np = to_of_node(dev->fwnode); struct of_phandle_args parent; int rc; - /* - * Currently, only OF fwnode is supported so extend this - * function for ACPI support. - */ - if (!np) - return -EINVAL; - /* Save device pointer and register base */ priv->dev = dev; priv->regs = regs; - /* Find out number of interrupt sources */ - rc = of_property_read_u32(np, "riscv,num-sources", &priv->nr_irqs); - if (rc) { - dev_err(dev, "failed to get number of interrupt sources\n"); - return rc; - } - - /* - * Find out number of IDCs based on parent interrupts - * - * If "msi-parent" property is present then we ignore the - * APLIC IDCs which forces the APLIC driver to use MSI mode. - */ - if (!of_property_present(np, "msi-parent")) { - while (!of_irq_parse_one(np, priv->nr_idcs, &parent)) - priv->nr_idcs++; + if (np) { + /* Find out number of interrupt sources */ + rc = of_property_read_u32(np, "riscv,num-sources", &priv->nr_irqs); + if (rc) { + dev_err(dev, "failed to get number of interrupt sources\n"); + return rc; + } + + /* + * Find out number of IDCs based on parent interrupts + * + * If "msi-parent" property is present then we ignore the + * APLIC IDCs which forces the APLIC driver to use MSI mode. + */ + if (!of_property_present(np, "msi-parent")) { + while (!of_irq_parse_one(np, priv->nr_idcs, &parent)) + priv->nr_idcs++; + } + } else { + rc = riscv_acpi_get_gsi_info(dev->fwnode, &priv->gsi_base, &priv->acpi_aplic_id, + &priv->nr_irqs, &priv->nr_idcs); + if (rc) { + dev_err(dev, "failed to find GSI mapping\n"); + return rc; + } } /* Setup initial state APLIC interrupts */ @@ -175,16 +188,20 @@ static int aplic_probe(struct platform_device *pdev) /* Map the MMIO registers */ regs = devm_platform_ioremap_resource(pdev, 0); - if (!regs) { + if (IS_ERR(regs)) { dev_err(dev, "failed map MMIO registers\n"); - return -ENOMEM; + return PTR_ERR(regs); } /* * If msi-parent property is present then setup APLIC MSI * mode otherwise setup APLIC direct mode. */ - msi_mode = of_property_present(to_of_node(dev->fwnode), "msi-parent"); + if (is_of_node(dev->fwnode)) + msi_mode = of_property_present(to_of_node(dev->fwnode), "msi-parent"); + else + msi_mode = imsic_acpi_get_fwnode(NULL) ? 1 : 0; + if (msi_mode) rc = aplic_msi_setup(dev, regs); else @@ -192,6 +209,11 @@ static int aplic_probe(struct platform_device *pdev) if (rc) dev_err(dev, "failed to setup APLIC in %s mode\n", msi_mode ? "MSI" : "direct"); +#ifdef CONFIG_ACPI + if (!acpi_disabled) + acpi_dev_clear_dependencies(ACPI_COMPANION(dev)); +#endif + return rc; } @@ -204,6 +226,7 @@ static struct platform_driver aplic_driver = { .driver = { .name = "riscv-aplic", .of_match_table = aplic_match, + .acpi_match_table = ACPI_PTR(aplic_acpi_match), }, .probe = aplic_probe, }; |