diff options
Diffstat (limited to 'drivers/net/phy/phy_device.c')
| -rw-r--r-- | drivers/net/phy/phy_device.c | 108 |
1 files changed, 93 insertions, 15 deletions
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 7752e9386b40..560e338b307a 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -29,6 +29,7 @@ #include <linux/phy.h> #include <linux/phylib_stubs.h> #include <linux/phy_led_triggers.h> +#include <linux/phy_link_topology.h> #include <linux/pse-pd/pse.h> #include <linux/property.h> #include <linux/rtnetlink.h> @@ -279,6 +280,15 @@ static struct phy_driver genphy_driver; static LIST_HEAD(phy_fixup_list); static DEFINE_MUTEX(phy_fixup_lock); +static bool phy_drv_wol_enabled(struct phy_device *phydev) +{ + struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL }; + + phy_ethtool_get_wol(phydev, &wol); + + return wol.wolopts != 0; +} + static bool mdio_bus_phy_may_suspend(struct phy_device *phydev) { struct device_driver *drv = phydev->mdio.dev.driver; @@ -288,6 +298,12 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev) if (!drv || !phydrv->suspend) return false; + /* If the PHY on the mido bus is not attached but has WOL enabled + * we cannot suspend the PHY. + */ + if (!netdev && phy_drv_wol_enabled(phydev)) + return false; + /* PHY not attached? May suspend if the PHY has not already been * suspended as part of a prior call to phy_disconnect() -> * phy_detach() -> phy_suspend() because the parent netdev might be the @@ -1370,6 +1386,48 @@ phy_standalone_show(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RO(phy_standalone); /** + * phy_sfp_connect_phy - Connect the SFP module's PHY to the upstream PHY + * @upstream: pointer to the upstream phy device + * @phy: pointer to the SFP module's phy device + * + * This helper allows keeping track of PHY devices on the link. It adds the + * SFP module's phy to the phy namespace of the upstream phy + * + * Return: 0 on success, otherwise a negative error code. + */ +int phy_sfp_connect_phy(void *upstream, struct phy_device *phy) +{ + struct phy_device *phydev = upstream; + struct net_device *dev = phydev->attached_dev; + + if (dev) + return phy_link_topo_add_phy(dev, phy, PHY_UPSTREAM_PHY, phydev); + + return 0; +} +EXPORT_SYMBOL(phy_sfp_connect_phy); + +/** + * phy_sfp_disconnect_phy - Disconnect the SFP module's PHY from the upstream PHY + * @upstream: pointer to the upstream phy device + * @phy: pointer to the SFP module's phy device + * + * This helper allows keeping track of PHY devices on the link. It removes the + * SFP module's phy to the phy namespace of the upstream phy. As the module phy + * will be destroyed, re-inserting the same module will add a new phy with a + * new index. + */ +void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy) +{ + struct phy_device *phydev = upstream; + struct net_device *dev = phydev->attached_dev; + + if (dev) + phy_link_topo_del_phy(dev, phy); +} +EXPORT_SYMBOL(phy_sfp_disconnect_phy); + +/** * phy_sfp_attach - attach the SFP bus to the PHY upstream network device * @upstream: pointer to the phy device * @bus: sfp bus representing cage being attached @@ -1511,6 +1569,10 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, if (phydev->sfp_bus_attached) dev->sfp_bus = phydev->sfp_bus; + + err = phy_link_topo_add_phy(dev, phydev, PHY_UPSTREAM_MAC, dev); + if (err) + goto error; } /* Some Ethernet drivers try to connect to a PHY device before @@ -1938,6 +2000,7 @@ void phy_detach(struct phy_device *phydev) if (dev) { phydev->attached_dev->phydev = NULL; phydev->attached_dev = NULL; + phy_link_topo_del_phy(dev, phydev); } phydev->phylink = NULL; @@ -1975,7 +2038,6 @@ EXPORT_SYMBOL(phy_detach); int phy_suspend(struct phy_device *phydev) { - struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL }; struct net_device *netdev = phydev->attached_dev; const struct phy_driver *phydrv = phydev->drv; int ret; @@ -1983,8 +2045,7 @@ int phy_suspend(struct phy_device *phydev) if (phydev->suspended || !phydrv) return 0; - phy_ethtool_get_wol(phydev, &wol); - phydev->wol_enabled = wol.wolopts || + phydev->wol_enabled = phy_drv_wol_enabled(phydev) || (netdev && netdev->ethtool->wol_enabled); /* If the device has WOL enabled, we cannot suspend the PHY */ if (phydev->wol_enabled && !(phydrv->flags & PHY_ALWAYS_CALL_SUSPEND)) @@ -2095,22 +2156,20 @@ EXPORT_SYMBOL(phy_reset_after_clk_enable); /** * genphy_config_advert - sanitize and advertise auto-negotiation parameters * @phydev: target phy_device struct + * @advert: auto-negotiation parameters to advertise * * Description: Writes MII_ADVERTISE with the appropriate values, * after sanitizing the values to make sure we only advertise * what is supported. Returns < 0 on error, 0 if the PHY's advertisement * hasn't changed, and > 0 if it has changed. */ -static int genphy_config_advert(struct phy_device *phydev) +static int genphy_config_advert(struct phy_device *phydev, + const unsigned long *advert) { int err, bmsr, changed = 0; u32 adv; - /* Only allow advertising what this PHY supports */ - linkmode_and(phydev->advertising, phydev->advertising, - phydev->supported); - - adv = linkmode_adv_to_mii_adv_t(phydev->advertising); + adv = linkmode_adv_to_mii_adv_t(advert); /* Setup standard advertisement */ err = phy_modify_changed(phydev, MII_ADVERTISE, @@ -2133,7 +2192,7 @@ static int genphy_config_advert(struct phy_device *phydev) if (!(bmsr & BMSR_ESTATEN)) return changed; - adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising); + adv = linkmode_adv_to_mii_ctrl1000_t(advert); err = phy_modify_changed(phydev, MII_CTRL1000, ADVERTISE_1000FULL | ADVERTISE_1000HALF, @@ -2357,6 +2416,9 @@ EXPORT_SYMBOL(genphy_check_and_restart_aneg); */ int __genphy_config_aneg(struct phy_device *phydev, bool changed) { + __ETHTOOL_DECLARE_LINK_MODE_MASK(fixed_advert); + const struct phy_setting *set; + unsigned long *advert; int err; err = genphy_c45_an_config_eee_aneg(phydev); @@ -2371,10 +2433,25 @@ int __genphy_config_aneg(struct phy_device *phydev, bool changed) else if (err) changed = true; - if (AUTONEG_ENABLE != phydev->autoneg) + if (phydev->autoneg == AUTONEG_ENABLE) { + /* Only allow advertising what this PHY supports */ + linkmode_and(phydev->advertising, phydev->advertising, + phydev->supported); + advert = phydev->advertising; + } else if (phydev->speed < SPEED_1000) { return genphy_setup_forced(phydev); + } else { + linkmode_zero(fixed_advert); + + set = phy_lookup_setting(phydev->speed, phydev->duplex, + phydev->supported, true); + if (set) + linkmode_set_bit(set->bit, fixed_advert); + + advert = fixed_advert; + } - err = genphy_config_advert(phydev); + err = genphy_config_advert(phydev, advert); if (err < 0) /* error */ return err; else if (err) @@ -3330,7 +3407,7 @@ static int of_phy_led(struct phy_device *phydev, static int of_phy_leds(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; - struct device_node *leds, *led; + struct device_node *leds; int err; if (!IS_ENABLED(CONFIG_OF_MDIO)) @@ -3343,15 +3420,16 @@ static int of_phy_leds(struct phy_device *phydev) if (!leds) return 0; - for_each_available_child_of_node(leds, led) { + for_each_available_child_of_node_scoped(leds, led) { err = of_phy_led(phydev, led); if (err) { - of_node_put(led); + of_node_put(leds); phy_leds_unregister(phydev); return err; } } + of_node_put(leds); return 0; } |