diff options
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/helpers.c | 101 | ||||
-rw-r--r-- | drivers/regulator/mt6315-regulator.c | 4 | ||||
-rw-r--r-- | drivers/regulator/pca9450-regulator.c | 10 | ||||
-rw-r--r-- | drivers/regulator/qcom-rpmh-regulator.c | 6 | ||||
-rw-r--r-- | drivers/regulator/rt4831-regulator.c | 4 |
5 files changed, 109 insertions, 16 deletions
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index f42b394a0c46..0e16e31c968f 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -509,6 +509,33 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev, EXPORT_SYMBOL_GPL(regulator_map_voltage_pickable_linear_range); /** + * regulator_desc_list_voltage_linear - List voltages with simple calculation + * + * @desc: Regulator desc for regulator which volatges are to be listed + * @selector: Selector to convert into a voltage + * + * Regulators with a simple linear mapping between voltages and + * selectors can set min_uV and uV_step in the regulator descriptor + * and then use this function prior regulator registration to list + * the voltages. This is useful when voltages need to be listed during + * device-tree parsing. + */ +int regulator_desc_list_voltage_linear(const struct regulator_desc *desc, + unsigned int selector) +{ + if (selector >= desc->n_voltages) + return -EINVAL; + + if (selector < desc->linear_min_sel) + return 0; + + selector -= desc->linear_min_sel; + + return desc->min_uV + (desc->uV_step * selector); +} +EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear); + +/** * regulator_list_voltage_linear - List voltages with simple calculation * * @rdev: Regulator device @@ -521,14 +548,7 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_pickable_linear_range); int regulator_list_voltage_linear(struct regulator_dev *rdev, unsigned int selector) { - if (selector >= rdev->desc->n_voltages) - return -EINVAL; - if (selector < rdev->desc->linear_min_sel) - return 0; - - selector -= rdev->desc->linear_min_sel; - - return rdev->desc->min_uV + (rdev->desc->uV_step * selector); + return regulator_desc_list_voltage_linear(rdev->desc, selector); } EXPORT_SYMBOL_GPL(regulator_list_voltage_linear); @@ -881,3 +901,68 @@ bool regulator_is_equal(struct regulator *reg1, struct regulator *reg2) return reg1->rdev == reg2->rdev; } EXPORT_SYMBOL_GPL(regulator_is_equal); + +static int find_closest_bigger(unsigned int target, const unsigned int *table, + unsigned int num_sel, unsigned int *sel) +{ + unsigned int s, tmp, max, maxsel = 0; + bool found = false; + + max = table[0]; + + for (s = 0; s < num_sel; s++) { + if (table[s] > max) { + max = table[s]; + maxsel = s; + } + if (table[s] >= target) { + if (!found || table[s] - target < tmp - target) { + tmp = table[s]; + *sel = s; + found = true; + if (tmp == target) + break; + } + } + } + + if (!found) { + *sel = maxsel; + return -EINVAL; + } + + return 0; +} + +/** + * regulator_set_ramp_delay_regmap - set_ramp_delay() helper + * + * @rdev: regulator to operate on + * + * Regulators that use regmap for their register I/O can set the ramp_reg + * and ramp_mask fields in their descriptor and then use this as their + * set_ramp_delay operation, saving some code. + */ +int regulator_set_ramp_delay_regmap(struct regulator_dev *rdev, int ramp_delay) +{ + int ret; + unsigned int sel; + + if (!rdev->desc->n_ramp_values) + return -EINVAL; + + ret = find_closest_bigger(ramp_delay, rdev->desc->ramp_delay_table, + rdev->desc->n_ramp_values, &sel); + + if (ret) { + dev_warn(rdev_get_dev(rdev), + "Can't set ramp-delay %u, setting %u\n", ramp_delay, + rdev->desc->ramp_delay_table[sel]); + } + + sel <<= ffs(rdev->desc->ramp_mask) - 1; + + return regmap_update_bits(rdev->regmap, rdev->desc->ramp_reg, + rdev->desc->ramp_mask, sel); +} +EXPORT_SYMBOL_GPL(regulator_set_ramp_delay_regmap); diff --git a/drivers/regulator/mt6315-regulator.c b/drivers/regulator/mt6315-regulator.c index d49a1534d8e9..9edc34981ee0 100644 --- a/drivers/regulator/mt6315-regulator.c +++ b/drivers/regulator/mt6315-regulator.c @@ -41,7 +41,7 @@ struct mt6315_chip { .type = REGULATOR_VOLTAGE, \ .id = _bid, \ .owner = THIS_MODULE, \ - .n_voltages = 0xbf, \ + .n_voltages = 0xc0, \ .linear_ranges = mt_volt_range1, \ .n_linear_ranges = ARRAY_SIZE(mt_volt_range1), \ .vsel_reg = _vsel, \ @@ -69,7 +69,7 @@ static unsigned int mt6315_map_mode(u32 mode) case MT6315_BUCK_MODE_LP: return REGULATOR_MODE_IDLE; default: - return -EINVAL; + return REGULATOR_MODE_INVALID; } } diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c index 833d398c6aa2..2f7ee212cb8c 100644 --- a/drivers/regulator/pca9450-regulator.c +++ b/drivers/regulator/pca9450-regulator.c @@ -797,6 +797,14 @@ static int pca9450_i2c_probe(struct i2c_client *i2c, return ret; } + /* Clear PRESET_EN bit in BUCK123_DVS to use DVS registers */ + ret = regmap_clear_bits(pca9450->regmap, PCA9450_REG_BUCK123_DVS, + BUCK123_PRESET_EN); + if (ret) { + dev_err(&i2c->dev, "Failed to clear PRESET_EN bit: %d\n", ret); + return ret; + } + /* Set reset behavior on assertion of WDOG_B signal */ ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL, WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12); @@ -814,7 +822,7 @@ static int pca9450_i2c_probe(struct i2c_client *i2c, if (IS_ERR(pca9450->sd_vsel_gpio)) { dev_err(&i2c->dev, "Failed to get SD_VSEL GPIO\n"); - return ret; + return PTR_ERR(pca9450->sd_vsel_gpio); } dev_info(&i2c->dev, "%s probed.\n", diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index 79a554f1029d..65a108c9121f 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -726,8 +726,8 @@ static const struct rpmh_vreg_hw_data pmic5_ftsmps510 = { static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = { .regulator_type = VRM, .ops = &rpmh_regulator_vrm_ops, - .voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 16000), - .n_voltages = 5, + .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 235, 16000), + .n_voltages = 236, .pmic_mode_map = pmic_mode_map_pmic5_smps, .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, }; @@ -901,7 +901,7 @@ static const struct rpmh_vreg_init_data pm8350_vreg_data[] = { }; static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = { - RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"), + RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps515, "vdd-s1"), RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"), RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"), RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"), diff --git a/drivers/regulator/rt4831-regulator.c b/drivers/regulator/rt4831-regulator.c index 3d4695ded629..e3aaac90d238 100644 --- a/drivers/regulator/rt4831-regulator.c +++ b/drivers/regulator/rt4831-regulator.c @@ -153,9 +153,9 @@ static int rt4831_regulator_probe(struct platform_device *pdev) int i, ret; regmap = dev_get_regmap(pdev->dev.parent, NULL); - if (IS_ERR(regmap)) { + if (!regmap) { dev_err(&pdev->dev, "Failed to init regmap\n"); - return PTR_ERR(regmap); + return -ENODEV; } /* Configure DSV mode to normal by default */ |