summaryrefslogtreecommitdiff
path: root/drivers/uio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/uio')
-rw-r--r--drivers/uio/Kconfig13
-rw-r--r--drivers/uio/Makefile1
-rw-r--r--drivers/uio/uio.c26
-rw-r--r--drivers/uio/uio_pdrv.c2
-rw-r--r--drivers/uio/uio_sercos3.c243
5 files changed, 279 insertions, 6 deletions
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 4190be64917f..04b954cfce76 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -58,4 +58,17 @@ config UIO_SMX
If you compile this as a module, it will be called uio_smx.
+config UIO_SERCOS3
+ tristate "Automata Sercos III PCI card driver"
+ default n
+ help
+ Userspace I/O interface for the Sercos III PCI card from
+ Automata GmbH. The userspace part of this driver will be
+ available for download from the Automata GmbH web site.
+
+ Automata GmbH: http://www.automataweb.com
+ Sercos III interface: http://www.sercos.com
+
+ If you compile this as a module, it will be called uio_sercos3.
+
endif
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index 8667bbdef904..e69558149859 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_UIO_CIF) += uio_cif.o
obj-$(CONFIG_UIO_PDRV) += uio_pdrv.o
obj-$(CONFIG_UIO_PDRV_GENIRQ) += uio_pdrv_genirq.o
obj-$(CONFIG_UIO_SMX) += uio_smx.o
+obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index 4f28f4bf8366..f9b4647255aa 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -70,6 +70,11 @@ static ssize_t map_size_show(struct uio_mem *mem, char *buf)
return sprintf(buf, "0x%lx\n", mem->size);
}
+static ssize_t map_offset_show(struct uio_mem *mem, char *buf)
+{
+ return sprintf(buf, "0x%lx\n", mem->addr & ~PAGE_MASK);
+}
+
struct uio_sysfs_entry {
struct attribute attr;
ssize_t (*show)(struct uio_mem *, char *);
@@ -80,10 +85,13 @@ static struct uio_sysfs_entry addr_attribute =
__ATTR(addr, S_IRUGO, map_addr_show, NULL);
static struct uio_sysfs_entry size_attribute =
__ATTR(size, S_IRUGO, map_size_show, NULL);
+static struct uio_sysfs_entry offset_attribute =
+ __ATTR(offset, S_IRUGO, map_offset_show, NULL);
static struct attribute *attrs[] = {
&addr_attribute.attr,
&size_attribute.attr,
+ &offset_attribute.attr,
NULL, /* need to NULL terminate the list of attributes */
};
@@ -484,15 +492,23 @@ static int uio_vma_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
{
struct uio_device *idev = vma->vm_private_data;
struct page *page;
+ unsigned long offset;
int mi = uio_find_mem_index(vma);
if (mi < 0)
return VM_FAULT_SIGBUS;
+ /*
+ * We need to subtract mi because userspace uses offset = N*PAGE_SIZE
+ * to use mem[N].
+ */
+ offset = (vmf->pgoff - mi) << PAGE_SHIFT;
+
if (idev->info->mem[mi].memtype == UIO_MEM_LOGICAL)
- page = virt_to_page(idev->info->mem[mi].addr);
+ page = virt_to_page(idev->info->mem[mi].addr + offset);
else
- page = vmalloc_to_page((void*)idev->info->mem[mi].addr);
+ page = vmalloc_to_page((void *)idev->info->mem[mi].addr
+ + offset);
get_page(page);
vmf->page = page;
return 0;
@@ -684,9 +700,9 @@ int __uio_register_device(struct module *owner,
if (ret)
goto err_get_minor;
- idev->dev = device_create_drvdata(uio_class->class, parent,
- MKDEV(uio_major, idev->minor), idev,
- "uio%d", idev->minor);
+ idev->dev = device_create(uio_class->class, parent,
+ MKDEV(uio_major, idev->minor), idev,
+ "uio%d", idev->minor);
if (IS_ERR(idev->dev)) {
printk(KERN_ERR "UIO: device register failed\n");
ret = PTR_ERR(idev->dev);
diff --git a/drivers/uio/uio_pdrv.c b/drivers/uio/uio_pdrv.c
index 0b4ef39cd85d..d494ce9288c3 100644
--- a/drivers/uio/uio_pdrv.c
+++ b/drivers/uio/uio_pdrv.c
@@ -12,7 +12,7 @@
#include <linux/uio_driver.h>
#include <linux/stringify.h>
-#define DRIVER_NAME "uio"
+#define DRIVER_NAME "uio_pdrv"
struct uio_platdata {
struct uio_info *uioinfo;
diff --git a/drivers/uio/uio_sercos3.c b/drivers/uio/uio_sercos3.c
new file mode 100644
index 000000000000..a6d1b2bc47f3
--- /dev/null
+++ b/drivers/uio/uio_sercos3.c
@@ -0,0 +1,243 @@
+/* sercos3: UIO driver for the Automata Sercos III PCI card
+
+ Copyright (C) 2008 Linutronix GmbH
+ Author: John Ogness <john.ogness@linutronix.de>
+
+ This is a straight-forward UIO driver, where interrupts are disabled
+ by the interrupt handler and re-enabled via a write to the UIO device
+ by the userspace-part.
+
+ The only part that may seem odd is the use of a logical OR when
+ storing and restoring enabled interrupts. This is done because the
+ userspace-part could directly modify the Interrupt Enable Register
+ at any time. To reduce possible conflicts, the kernel driver uses
+ a logical OR to make more controlled changes (rather than blindly
+ overwriting previous values).
+
+ Race conditions exist if the userspace-part directly modifies the
+ Interrupt Enable Register while in operation. The consequences are
+ that certain interrupts would fail to be enabled or disabled. For
+ this reason, the userspace-part should only directly modify the
+ Interrupt Enable Register at the beginning (to get things going).
+ The userspace-part can safely disable interrupts at any time using
+ a write to the UIO device.
+*/
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/uio_driver.h>
+#include <linux/io.h>
+
+/* ID's for SERCOS III PCI card (PLX 9030) */
+#define SERCOS_SUB_VENDOR_ID 0x1971
+#define SERCOS_SUB_SYSID_3530 0x3530
+#define SERCOS_SUB_SYSID_3535 0x3535
+#define SERCOS_SUB_SYSID_3780 0x3780
+
+/* Interrupt Enable Register */
+#define IER0_OFFSET 0x08
+
+/* Interrupt Status Register */
+#define ISR0_OFFSET 0x18
+
+struct sercos3_priv {
+ u32 ier0_cache;
+ spinlock_t ier0_cache_lock;
+};
+
+/* this function assumes ier0_cache_lock is locked! */
+static void sercos3_disable_interrupts(struct uio_info *info,
+ struct sercos3_priv *priv)
+{
+ void __iomem *ier0 = info->mem[3].internal_addr + IER0_OFFSET;
+
+ /* add enabled interrupts to cache */
+ priv->ier0_cache |= ioread32(ier0);
+
+ /* disable interrupts */
+ iowrite32(0, ier0);
+}
+
+/* this function assumes ier0_cache_lock is locked! */
+static void sercos3_enable_interrupts(struct uio_info *info,
+ struct sercos3_priv *priv)
+{
+ void __iomem *ier0 = info->mem[3].internal_addr + IER0_OFFSET;
+
+ /* restore previously enabled interrupts */
+ iowrite32(ioread32(ier0) | priv->ier0_cache, ier0);
+ priv->ier0_cache = 0;
+}
+
+static irqreturn_t sercos3_handler(int irq, struct uio_info *info)
+{
+ struct sercos3_priv *priv = info->priv;
+ void __iomem *isr0 = info->mem[3].internal_addr + ISR0_OFFSET;
+ void __iomem *ier0 = info->mem[3].internal_addr + IER0_OFFSET;
+
+ if (!(ioread32(isr0) & ioread32(ier0)))
+ return IRQ_NONE;
+
+ spin_lock(&priv->ier0_cache_lock);
+ sercos3_disable_interrupts(info, priv);
+ spin_unlock(&priv->ier0_cache_lock);
+
+ return IRQ_HANDLED;
+}
+
+static int sercos3_irqcontrol(struct uio_info *info, s32 irq_on)
+{
+ struct sercos3_priv *priv = info->priv;
+
+ spin_lock_irq(&priv->ier0_cache_lock);
+ if (irq_on)
+ sercos3_enable_interrupts(info, priv);
+ else
+ sercos3_disable_interrupts(info, priv);
+ spin_unlock_irq(&priv->ier0_cache_lock);
+
+ return 0;
+}
+
+static int sercos3_setup_iomem(struct pci_dev *dev, struct uio_info *info,
+ int n, int pci_bar)
+{
+ info->mem[n].addr = pci_resource_start(dev, pci_bar);
+ if (!info->mem[n].addr)
+ return -1;
+ info->mem[n].internal_addr = ioremap(pci_resource_start(dev, pci_bar),
+ pci_resource_len(dev, pci_bar));
+ if (!info->mem[n].internal_addr)
+ return -1;
+ info->mem[n].size = pci_resource_len(dev, pci_bar);
+ info->mem[n].memtype = UIO_MEM_PHYS;
+ return 0;
+}
+
+static int __devinit sercos3_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct uio_info *info;
+ struct sercos3_priv *priv;
+ int i;
+
+ info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ priv = kzalloc(sizeof(struct sercos3_priv), GFP_KERNEL);
+ if (!priv)
+ goto out_free;
+
+ if (pci_enable_device(dev))
+ goto out_free_priv;
+
+ if (pci_request_regions(dev, "sercos3"))
+ goto out_disable;
+
+ /* we only need PCI BAR's 0, 2, 3, 4, 5 */
+ if (sercos3_setup_iomem(dev, info, 0, 0))
+ goto out_unmap;
+ if (sercos3_setup_iomem(dev, info, 1, 2))
+ goto out_unmap;
+ if (sercos3_setup_iomem(dev, info, 2, 3))
+ goto out_unmap;
+ if (sercos3_setup_iomem(dev, info, 3, 4))
+ goto out_unmap;
+ if (sercos3_setup_iomem(dev, info, 4, 5))
+ goto out_unmap;
+
+ spin_lock_init(&priv->ier0_cache_lock);
+ info->priv = priv;
+ info->name = "Sercos_III_PCI";
+ info->version = "0.0.1";
+ info->irq = dev->irq;
+ info->irq_flags = IRQF_DISABLED | IRQF_SHARED;
+ info->handler = sercos3_handler;
+ info->irqcontrol = sercos3_irqcontrol;
+
+ pci_set_drvdata(dev, info);
+
+ if (uio_register_device(&dev->dev, info))
+ goto out_unmap;
+
+ return 0;
+
+out_unmap:
+ for (i = 0; i < 5; i++) {
+ if (info->mem[i].internal_addr)
+ iounmap(info->mem[i].internal_addr);
+ }
+ pci_release_regions(dev);
+out_disable:
+ pci_disable_device(dev);
+out_free_priv:
+ kfree(priv);
+out_free:
+ kfree(info);
+ return -ENODEV;
+}
+
+static void sercos3_pci_remove(struct pci_dev *dev)
+{
+ struct uio_info *info = pci_get_drvdata(dev);
+ int i;
+
+ uio_unregister_device(info);
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ pci_set_drvdata(dev, NULL);
+ for (i = 0; i < 5; i++) {
+ if (info->mem[i].internal_addr)
+ iounmap(info->mem[i].internal_addr);
+ }
+ kfree(info->priv);
+ kfree(info);
+}
+
+static struct pci_device_id sercos3_pci_ids[] __devinitdata = {
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9030,
+ .subvendor = SERCOS_SUB_VENDOR_ID,
+ .subdevice = SERCOS_SUB_SYSID_3530,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9030,
+ .subvendor = SERCOS_SUB_VENDOR_ID,
+ .subdevice = SERCOS_SUB_SYSID_3535,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9030,
+ .subvendor = SERCOS_SUB_VENDOR_ID,
+ .subdevice = SERCOS_SUB_SYSID_3780,
+ },
+ { 0, }
+};
+
+static struct pci_driver sercos3_pci_driver = {
+ .name = "sercos3",
+ .id_table = sercos3_pci_ids,
+ .probe = sercos3_pci_probe,
+ .remove = sercos3_pci_remove,
+};
+
+static int __init sercos3_init_module(void)
+{
+ return pci_register_driver(&sercos3_pci_driver);
+}
+
+static void __exit sercos3_exit_module(void)
+{
+ pci_unregister_driver(&sercos3_pci_driver);
+}
+
+module_init(sercos3_init_module);
+module_exit(sercos3_exit_module);
+
+MODULE_DESCRIPTION("UIO driver for the Automata Sercos III PCI card");
+MODULE_AUTHOR("John Ogness <john.ogness@linutronix.de>");
+MODULE_LICENSE("GPL v2");