summaryrefslogtreecommitdiff
path: root/drivers/clk/imx
AgeCommit message (Collapse)Author
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-07-12Merge branches 'clk-rpi-cpufreq', 'clk-tegra', 'clk-simplify-provider.h', ↵Stephen Boyd
'clk-sprd' and 'clk-at91' into clk-next - Support for CPU clks on Raspberry Pi devices - Slow clk support for AT91 SAM9X60 SoCs * clk-rpi-cpufreq: clk: raspberrypi: register platform device for raspberrypi-cpufreq firmware: raspberrypi: register clk device clk: bcm283x: add driver interfacing with Raspberry Pi's firmware clk: bcm2835: remove pllb * clk-tegra: clk: tegra: Do not enable PLL_RE_VCO on Tegra210 clk: tegra: Warn if an enabled PLL is in IDDQ clk: tegra: Do not warn unnecessarily clk: tegra210: fix PLLU and PLLU_OUT1 * clk-simplify-provider.h: clk: consoldiate the __clk_get_hw() declarations clk: Unexport __clk_of_table clk: Remove ifdef for COMMON_CLK in clk-provider.h * clk-sprd: clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: sprd: Check error only for devm_regmap_init_mmio() clk: sprd: Switch from of_iomap() to devm_ioremap_resource() * clk-at91: clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: at91: sckc: add support for SAM9X60 dt-bindings: clk: at91: add bindings for SAM9X60's slow clock controller clk: at91: sckc: add support to specify registers bit offsets clk: at91: sckc: sama5d4 has no bypass support
2019-07-12clk: consoldiate the __clk_get_hw() declarationsStephen Rothwell
Without this we were getting errors like: In file included from drivers/clk/clkdev.c:22:0: drivers/clk/clk.h:36:23: error: static declaration of '__clk_get_hw' follows non-static declaration include/linux/clk-provider.h:808:16: note: previous declaration of '__clk_get_hw' was here Fixes: 59fcdce425b7 ("clk: Remove ifdef for COMMON_CLK in clk-provider.h") fixes: 73e0e496afda ("clkdev: Always allocate a struct clk and call __clk_get() w/ CCF") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-24clk: imx8mq: Keep uart clocks on during system bootAnson Huang
Call imx_register_uart_clocks() API to keep uart clocks enabled when earlyprintk or earlycon is active. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-24clk: imx: Remove __init for imx_register_uart_clocks() APIAnson Huang
Some of i.MX SoCs' clock driver use platform driver model, and they need to call imx_register_uart_clocks() API, so imx_register_uart_clocks() API should NOT be in .init section. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 460Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation http www opensource org licenses gpl license html http www gnu org copyleft gpl html extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081201.897982733@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18clk: imx6q: fix section mismatch warningArnd Bergmann
The imx6q_obtain_fixed_clk_hw lacks an __init marker, which leads to this otherwise harmless warning: WARNING: vmlinux.o(.text+0x495358): Section mismatch in reference from the function imx6q_obtain_fixed_clk_hw() to the function .init.text:imx_obtain_fixed_clock_hw() The function imx6q_obtain_fixed_clk_hw() references the function __init imx_obtain_fixed_clock_hw(). This is often because imx6q_obtain_fixed_clk_hw lacks a __init annotation or the annotation of imx_obtain_fixed_clock_hw is wrong. Fixes: 992b703b5b38 ("clk: imx6q: Switch to clk_hw based API") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-18clk: imx8mq: Use devm_platform_ioremap_resource() instead of of_iomap()Anson Huang
i.MX8MQ clock driver uses platform driver model, better to use devm_platform_ioremap_resource() instead of of_iomap() to get IO base. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-18clk: imx8mq: Use imx_check_clocks() API directlyAnson Huang
Use imx_check_clocks() API to check clocks directly. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-18clk: imx: Remove __init for imx_check_clocks() APIAnson Huang
Some of i.MX SoCs' clock driver use platform driver model, and they need to call imx_check_clocks() API, so imx_check_clocks() API should NOT be in .init section. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx6sll: Switch to clk_hw based APIAbel Vesa
Switch the entire clk-imx6sll driver to clk_hw based API. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx7d: Switch to clk_hw based APIAbel Vesa
Switch the entire clk-imx7d driver to clk_hw based API. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx6ul: Switch to clk_hw based APIAbel Vesa
Switch the entire clk-imx6ul driver to clk_hw based API. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx6sx: Switch to clk_hw based APIAbel Vesa
Switch the entire clk-imx6sx driver to clk_hw based API. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx6q: Switch to clk_hw based APIAbel Vesa
Switch the entire clk-imx6q driver to clk_hw based API. Add imx6q_obtain_fixed_clk_hw helper to clean up the registration of the clocks that are either found in device tree or are assigned a fixed zero rate. This switch allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx6sl: Switch to clk_hw based APIAbel Vesa
Switch the entire clk-imx6sl driver to clk_hw based API. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx: Switch wrappers to clk_hw based APIAbel Vesa
Switch all the wrappers to clk_hw based API and rename them to indicate that. Add macros for clk based legacy users. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx: clk-fixup-mux: Switch to clk_hw based APIAbel Vesa
Switch the imx_clk_fixup_mux function to clk_hw based API, rename accordingly and add a macro for clk based legacy. a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx: clk-fixup-div: Switch to clk_hw based APIAbel Vesa
Switch the imx_clk_fixup_divider function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx: clk-gate-exclusive: Switch to clk_hw based APIAbel Vesa
Switch the imx_clk_gate_exclusive function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx: clk-pfd: Switch to clk_hw based APIAbel Vesa
Switch the imx_clk_pfd function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx: clk-pllv3: Switch to clk_hw based APIAbel Vesa
Switch the imx_clk_hw_pllv3 function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx: clk-gate2: Switch to clk_hw based APIAbel Vesa
Switch the clk_register_gate2 function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx: clk-cpu: Switch to clk_hw based APIAbel Vesa
Switch the clk_cpu clock registering function to clk_hw based API and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx: clk-busy: Switch to clk_hw based APIAbel Vesa
Switch all the clk_busy clock registering functions to clk_hw based API. Keep around some clk based wrappers to be used by older imx platforms. This allows us to move closer to a clear split of consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx6q: Do not reparent uninitialized IMX6QDL_CLK_PERIPH2 clockAbel Vesa
The clock is registered later than these two re-parentings. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx6sx: Do not reparent to unregistered IMX6SX_CLK_AXIAbel Vesa
The clock IMX6SX_CLK_AXI is not registered at all. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx: Add imx_obtain_fixed_clock clk_hw based variantAbel Vesa
In order to move to clk_hw based API, imx_obtain_fixed_clock_hw is added. The end goal here is to have all the clk providers use the clk_hw based API. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-07clk: imx: imx8mm: correct audio_pll2_clk to audio_pll2_outPeng Fan
There is no audio_pll2_clk registered, it should be audio_pll2_out. Cc: <stable@vger.kernel.org> Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 246 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31Merge tag 'spdx-5.2-rc3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull yet more SPDX updates from Greg KH: "Here is another set of reviewed patches that adds SPDX tags to different kernel files, based on a set of rules that are being used to parse the comments to try to determine that the license of the file is "GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of these matches are included here, a number of "non-obvious" variants of text have been found but those have been postponed for later review and analysis. There is also a patch in here to add the proper SPDX header to a bunch of Kbuild files that we have missed in the past due to new files being added and forgetting that Kbuild uses two different file names for Makefiles. This issue was reported by the Kbuild maintainer. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers" * tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits) treewide: Add SPDX license identifier - Kbuild treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201 ...
2019-05-30Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver fixes from Stephen Boyd: - Don't expose the SiFive clk driver on non-RISCV architectures - Fix some bits describing clks in the imx8mm driver - Always call clk domain code in the TI driver so non-legacy platforms work * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: ti: clkctrl: Fix clkdm_clk handling clk: imx: imx8mm: fix int pll clk gate clk: sifive: restrict Kconfig scope for the FU540 PRCI driver
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 159Thomas Gleixner
Based on 1 normalized pattern(s): the code contained herein is licensed under the gnu general public license you may obtain a copy of the gnu general public license version 2 or later at the following locations http www opensource org licenses gpl license html http www gnu org copyleft gpl html extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.383790741@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-23clk: imx: keep the mmdc p1 ipg clock always on on 6sx/ul/ull/sllJacky Bai
The MMDC_P1_IPG clock need to be on always on to make sure the MMDC register can be accessed successfully. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-23clk: imx8mm: Mark dram_apb criticalLeonard Crestez
This clock is used for dram operations inside TF-A and must be kept enabled for features such as suspend/resume dram retention and busfreq to work. This is required for imx8mm suspend to work with NXP branch of TF-A. There is an equivalent clk on imx8mq and it's always been marked as critical in upstream. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-23clk: imx7ulp: update nic1_bus_clk parent infoAnson Huang
Since i.MX7ULP B0 chip, nic1_bus_clk's parent is changed to from nic0_clk directly, update it accordingly. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-23clk: imx: Use imx_mmdc_mask_handshake() API for masking MMDC channelAnson Huang
Use imx_mmdc_mask_handshake() API instead of programming CCM register directly in each platform to mask unused MMDC channel's handshake. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-23clk: imx: Add common API for masking MMDC handshakeAnson Huang
All i.MX6 SoCs need to mask unused MMDC channel's handshake for low power modes, this patch provides common API for masking the MMDC channel passed from caller. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-23clk: imx8m: Add GIC clockLeonard Crestez
This is documented in the reference manuals as GIC_CLK_ROOT. In some out-of-tree DVFS scenarios the gic clock can end up as the only user of sys_pll2 so if we don't define the gic clk explicitly it might be turned off. This applies to both 8mq and 8mm: same clk register but diffferent parents. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-23clk: imx8mm: add SNVS clock to clock treeAnson Huang
i.MX8MM has clock gate for SNVS module, add it into clock tree for SNVS RTC driver to manage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-22clk: imx8mq: add SNVS clock to clock treeAnson Huang
i.MX8MQ has clock gate for SNVS module, add it into clock tree for SNVS RTC driver to manage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-21clk: imx: imx8mm: fix int pll clk gatePeng Fan
To Frac pll, the gate shift is 13, however to Int PLL the gate shift is 11. Cc: <stable@vger.kernel.org> Fixes: ba5625c3e27 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.615184352@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option [no]_[pad]_[ctrl] any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 176 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20clk: imx8mm: add GPIO clocks to clock treeAnson Huang
i.MX8MM has clock gate for each GPIO bank, add them into clock tree for GPIO driver to manage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-07Merge branches 'clk-doc', 'clk-more-critical', 'clk-meson' and ↵Stephen Boyd
'clk-basic-be' into clk-next - Remove clk_readl() and introduce BE versions of basic clk types * clk-doc: clk: Drop duplicate clk_register() documentation clk: Document and simplify clk_core_get_rate_nolock() clk: Remove 'flags' member of struct clk_fixed_rate clk: nxp: Drop 'flags' on fixed_rate clk macro clk: Document __clk_mux_determine_rate() clk: Document CLK_MUX_READ_ONLY mux flag clk: Document deprecated things clk: Collapse gpio clk kerneldoc * clk-more-critical: clk: highbank: Convert to CLK_IS_CRITICAL * clk-meson: (21 commits) clk: meson: axg-audio: add g12a support clk: meson: axg-audio: don't register inputs in the onecell data clk: meson: axg_audio: replace prefix axg by aud dt-bindings: clk: axg-audio: add g12a support clk: meson: meson8b: add the video decoder clock trees clk: meson: meson8b: add the VPU clock trees clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2 clk: meson: meson8b: use a separate clock table for Meson8m2 dt-bindings: clock: meson8b: export the video decoder clocks clk: meson-g12a: add video decoder clocks dt-bindings: clock: meson8b: export the VPU clock clk: meson-g12a: add PCIE PLL clocks dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLL dt-bindings: clock: meson8b: drop the "ABP" clock definition clk: meson: g12a: add cpu clocks dt-bindings: clk: g12a-clkc: add VDEC clock IDs dt-bindings: clock: axg-audio: unexpose controller inputs dt-bindings: clk: g12a-clkc: add PCIE PLL clock ID clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock id ... * clk-basic-be: clk: core: replace clk_{readl,writel} with {readl,writel} clk: core: remove powerpc special handling powerpc/512x: mark clocks as big endian clk: mux: add explicit big endian support clk: multiplier: add explicit big endian support clk: gate: add explicit big endian support clk: fractional-divider: add explicit big endian support clk: divider: add explicit big endian support
2019-05-07Merge branches 'clk-renesas', 'clk-qcom', 'clk-mtk', 'clk-milbeaut' and ↵Stephen Boyd
'clk-imx' into clk-next - Qualcomm QCS404 CDSP clk support - Qualcomm QCS404 Turing clk support - Mediatek MT8183 clock support - Mediatek MT8516 clock support - Milbeaut M10V clk controller support * clk-renesas: clk: renesas: rcar-gen3: Remove unused variable clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value clk: renesas: r8a77980: Fix RPC-IF module clock's parent clk: renesas: rcar-gen3: Rename DRIF clocks clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC clk: renesas: rcar-gen3: Correct parent clock of HS-USB clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCI clk: renesas: r8a774c0: Add Z2 clock clk: renesas: r8a77990: Add Z2 clock clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents math64: New DIV64_U64_ROUND_CLOSEST helper clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2 clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor clk: renesas: r9a06g032: Add missing PCI USB clock clk: renesas: r7s9210: Always use readl() clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register() * clk-qcom: clk: qcom: Skip halt checks on gcc_pcie_0_pipe_clk for 8998 clk: qcom: Add QCS404 TuringCC clk: qcom: branch: Add AON clock ops dt-bindings: clock: Introduce Qualcomm Turing Clock controller clk: qcom: gcc-qcs404: Add CDSP related clocks and resets * clk-mtk: clk: mediatek: add clock driver for MT8516 dt-bindings: mediatek: apmixedsys: add support for MT8516 dt-bindings: mediatek: infracfg: add support for MT8516 dt-bindings: mediatek: topckgen: add support for MT8516 clk: mediatek: Allow changing PLL rate when it is off clk: mediatek: Add MT8183 clock support clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_data clk: mediatek: Add dt-bindings for MT8183 clocks dt-bindings: ARM: Mediatek: Document bindings for MT8183 clk: mediatek: Add configurable pcwibits and fmin to mtk_pll_data clk: mediatek: Add new clkmux register API clk: mediatek: Disable tuner_en before change PLL rate * clk-milbeaut: clock: milbeaut: Add Milbeaut M10V clock controller dt-bindings: clock: milbeaut: add Milbeaut clock description * clk-imx: clk: imx: correct pfdv2 gate_bit/vld_bit operations clk: imx: clk-pllv3: mark expected switch fall-throughs clk: imx8mq: Add dsi_ipg_div clk: imx: pllv4: add fractional-N pll support clk: imx: keep uart clock on during system boot clk: imx: correct i.MX7D AV PLL num/denom offset clk: imx6sll: Fix mispelling uart4_serial as serail clk: imx: pll14xx: drop unused variable clk: imx: rename clk-imx51-imx53.c to clk-imx5.c clk: imx5: Fix i.MX50 ESDHC clock registers clk: imx5: Fix i.MX50 mainbus clock registers clk: imx: Remove unused imx_get_clk_hw_fixed dt-bindings: clock: imx7ulp: remove SNVS clock clk: imx7ulp: remove snvs clock