summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen/imx6ul_tsc.c
AgeCommit message (Collapse)Author
2023-01-09Input: imx6ul_tsc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-51-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-02Input: use input_device_enabled()Andrzej Pietrasiewicz
Use the newly added helper in relevant input drivers. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Link: https://lore.kernel.org/r/20200608112211.12125-3-andrzej.p@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-12Input: imx6ul_tsc - remove set but unused variable 'value'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/imx6ul_tsc.c: In function ‘adc_irq_fn’: drivers/input/touchscreen/imx6ul_tsc.c:307:6: warning: variable ‘value’ set but not used [-Wunused-but-set-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20201112110204.2083435-6-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-16Input: imx6ul_tsc - unify open/close and PM pathsDmitry Torokhov
Open/close and resume/suspend paths are very similar, let's factor out common parts. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-16Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()Dan Carpenter
If imx6ul_tsc_init() fails then we need to clean up the clocks. I reversed the "if (input_dev->users) {" condition to make the code a bit simpler. Fixes: 6cc527b05847 ("Input: imx6ul_tsc - propagate the errors") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200905124942.GC183976@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-14Input: remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-05-20Input: imx6ul_tsc - use devm_platform_ioremap_resource() to simplify codeAnson Huang
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21Input: imx6ul_tsc - switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-12Input: imx6ul_tsc - fix error handlingFabio Estevam
If imx6ul_tsc_init() fails we should not return directly. We should disable the previously acquired clocks in this case. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-15Input: imx6ul_tsc - generalize the averaging propertyGuy Shapiro
Make the avarage-samples property a general touchscreen property rather than imx6ul device specific. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: imx6ul_tsc - convert int to u32Guy Shapiro
The code uses of_property_read_u32 and expects positive values. However, the values are stored in signed int variables. Additionally, the registers values are also stored in signed variables without a good reason (readl/writel expect u32). The only time this caused a real bug was in the new average-samples property, in which the property is numerically compared and implicitly expected to be positive. I believe it's better to change all the properties and registers to u32, for consistency and warnings reduction. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Reported-by: Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: imx6ul_tsc - add mask when set REG_ADC_CFGHaibo Chen
Add mask of each function bits of REG_ADC_CFG, and clear these function bits first, otherwise use '|=' operation may get the wrong setting which depends on the original value of REG_ADC_CFG. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-27Input: imx6ul_tsc - add support for sample averagingGuy Shapiro
The i.MX6UL internal touchscreen controller contains an option to average upon samples. This feature reduces noise from the produced touch locations. This patch adds sample averaging support to the imx6ul_tsc device driver. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-19Input: imx6ul_tsc - fix controller nameFabio Estevam
We should better write "Touchscreen". Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-19Input: imx6ul_tsc - use the preferred method for kzalloc()Fabio Estevam
According to Documentation/CodingStyle: "The preferred form for passing a size of a struct is the following: p = kmalloc(sizeof(*p), ...);" so do as suggested. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-19Input: imx6ul_tsc - check for negative return valueFabio Estevam
We should check for negative values returned by platform_get_irq(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-19Input: imx6ul_tsc - propagate the errorsFabio Estevam
imx6ul_adc_init() may fail in two cases, so we should better propagate the errors and make sure that the callers of this function also check and propagate the errors accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-05Input: touchscreen - add imx6ul_tsc driver supportHaibo Chen
Freescale i.MX6UL contains a internal touchscreen controller, this patch add a driver to support this controller. Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>