summaryrefslogtreecommitdiff
path: root/drivers/ntb
AgeCommit message (Collapse)Author
2022-08-09NTB: epf: Allow more flexibility in the memory BAR map methodFrank Li
Support the below BAR configuration methods for epf NTB. BAR 0: config and scratchpad BAR 2: doorbell BAR 4: memory map windows Set difference BAR number information into struct ntb_epf_data. So difference VID/PID can choose different BAR configurations. There are difference BAR map method between epf NTB and epf vNTB Endpoint function. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-09ntb: intel: add GNR support for Intel PCIe gen5 NTBDave Jiang
Add Intel Granite Rapids NTB PCI device ID and related enabling. Expectation is same hardware interface as Saphire Rapids Xeon platforms. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-09NTB: ntb_tool: uninitialized heap data in tool_fn_write()Dan Carpenter
The call to: ret = simple_write_to_buffer(buf, size, offp, ubuf, size); will return success if it is able to write even one byte to "buf". The value of "*offp" controls which byte. This could result in reading uninitialized data when we do the sscanf() on the next line. This code is not really desigined to handle partial writes where *offp is non-zero and the "buf" is preserved and re-used between writes. Just ban partial writes and replace the simple_write_to_buffer() with copy_from_user(). Fixes: 578b881ba9c4 ("NTB: Add tool test client") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-09ntb: idt: fix clang -Wformat warningsJustin Stitt
When building with Clang we encounter these warnings: | drivers/ntb/hw/idt/ntb_hw_idt.c:2409:28: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] | "\t%hhu-%hhu.\t", idx + cnt - 1); - | drivers/ntb/hw/idt/ntb_hw_idt.c:2438:29: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] | "\t%hhu-%hhu.\t", idx + cnt - 1); - | drivers/ntb/hw/idt/ntb_hw_idt.c:2484:15: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat], src); For the first two warnings the format specifier used is `%hhu` which describes a u8. Both `idx` and `cnt` are u8 as well. However, the expression as a whole is promoted to an int as you cannot get smaller-than-int from addition. Therefore, to fix the warning, use the promoted-to-type's format specifier -- in this case `%d`. example: `` uint8_t a = 4, b = 7; int size = sizeof(a + b - 1); printf("%d\n", size); // output: 4 ``` For the last warning, src is of type `int` while the format specifier describes a u8. The fix here is just to use the proper specifier `%d`. See more: (https://wiki.sei.cmu.edu/confluence/display/c/INT02-C.+Understand+integer+conversion+rules) "Integer types smaller than int are promoted when an operation is performed on them. If all values of the original type can be represented as an int, the value of the smaller type is converted to an int; otherwise, it is converted to an unsigned int." Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Justin Stitt <justinstitt@google.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-01-28ntb: intel: fix port config status offset for SPRDave Jiang
The field offset for port configuration status on SPR has been changed to bit 14 from ICX where it resides at bit 12. By chance link status detection continued to work on SPR. This is due to bit 12 being a configuration bit which is in sync with the status bit. Fix this by checking for a SPR device and checking correct status bit. Fixes: 26bfe3d0b227 ("ntb: intel: Add Icelake (gen4) support for Intel NTB") Tested-by: Jerry Dai <jerry.dai@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-01-23NTB/msi: Use struct_size() helper in devm_kzalloc()Gustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/ntb/msi.c:46:23: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/174 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-01-17Merge tag 'ntb-5.17' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: "New AMD PCI ID for NTB, and a number of bug fixes for ntb_hw_switchtec for Linux v5.17" * tag 'ntb-5.17' of git://github.com/jonmason/ntb: ntb_hw_switchtec: Fix a minor issue in config_req_id_table() ntb_hw_switchtec: Remove code for disabling ID protection ntb_hw_switchtec: Update the way of getting VEP instance ID ntb_hw_switchtec: AND with the part_map for a valid tpart_vec ntb_hw_switchtec: Fix bug with more than 32 partitions ntb_hw_switchtec: Fix pff ioread to read into mmio_part_cfg_all ntb_hw_switchtec: fix the spelling of "its" NTB/msi: Fix ntbm_msi_request_threaded_irq() kernel-doc comment ntb_hw_amd: Add NTB PCI ID for new gen CPU
2022-01-11ntb_hw_switchtec: Fix a minor issue in config_req_id_table()Kelvin Cao
The req_id_table_size field is 16-bit wide, use ioread16() to read the value. Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-01-11ntb_hw_switchtec: Remove code for disabling ID protectionKelvin Cao
ID protection is a firmware setting for NT window access control. With it enabled, only the posted requests with requester IDs in the requester ID table will be allowed to access the NT windows. Otherwise all posted requests are allowed. Normally user will configure it statically via the Switchtec config file, and it will take effect when the firmware boots up. The driver can also toggle the ID protection setting dynamically, which will overwrite the static setting in the Switchtec config file as a side effect. Currently, the driver disables the ID protection. However, it's not necessary to disable the ID protection at the driver level as the driver has already configured the proper requester IDs in the requester ID table to allow the corresponding posted requests to hit the NT windows. Remove the code that disables the ID protection to make the static setting prevail. Note: ID protection is not applicable to non-posted requests. Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-01-11ntb_hw_switchtec: Update the way of getting VEP instance IDKelvin Cao
Gen4 firmware adds DMA VEP and NVMe VEP support in VEP (virtual EP) instance ID register in addtion to management EP. Update the way of getting management VEP instance ID. Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-01-11ntb_hw_switchtec: AND with the part_map for a valid tpart_vecJeremy Pallotta
Some firmware versions return 1 in the target partition vector for undefined partitions. AND with the part_map to give a valid tpart_vec. Signed-off-by: Jeremy Pallotta <jmpallotta@gmail.com> Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-01-11ntb_hw_switchtec: Fix bug with more than 32 partitionsWesley Sheng
Switchtec could support as mush as 48 partitions, but ffs & fls are for 32 bit argument, in case of partition index larger than 31, the current code could not parse the peer partition index correctly. Change to the 64 bit version __ffs64 & fls64 accordingly to fix this bug. Fixes: 3df54c870f52 ("ntb_hw_switchtec: Allow using Switchtec NTB in multi-partition setups") Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-01-11ntb_hw_switchtec: Fix pff ioread to read into mmio_part_cfg_allJeremy Pallotta
Array mmio_part_cfg_all holds the partition configuration of all partitions, with partition number as index. Fix this by reading into mmio_part_cfg_all for pff. Fixes: 0ee28f26f378 ("NTB: switchtec_ntb: Add link management") Signed-off-by: Jeremy Pallotta <jmpallotta@gmail.com> Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-01-11ntb_hw_switchtec: fix the spelling of "its"Randy Dunlap
Use the possessive "its" instead of the contraction "it's" (it is) in user messages. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-01-11NTB/msi: Fix ntbm_msi_request_threaded_irq() kernel-doc commentYang Li
Add the description of @msi_desc and change the @devname to @name in ntbm_msi_request_threaded_irq() kernel-doc comment to remove some warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/ntb/msi.c:285: warning: Function parameter or member 'name' not described in 'ntbm_msi_request_threaded_irq' drivers/ntb/msi.c:285: warning: Function parameter or member 'msi_desc' not described in 'ntbm_msi_request_threaded_irq' drivers/ntb/msi.c:285: warning: Excess function parameter 'devname' description in 'ntbm_msi_request_threaded_irq' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-01-11ntb_hw_amd: Add NTB PCI ID for new gen CPUSanjay R Mehta
Add NTB support for new generation of processor Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2021-12-16NTB/msi: Convert to msi_on_each_desc()Thomas Gleixner
Replace the about to vanish iterators, make use of the filtering and take the descriptor lock around the iteration. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20211206210748.683004012@linutronix.de
2021-09-07Merge tag 'ntb-5.15' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: "Bug fixes and clean-ups for Linux v5.15" * tag 'ntb-5.15' of git://github.com/jonmason/ntb: NTB: switch from 'pci_' to 'dma_' API ntb: ntb_pingpong: remove redundant initialization of variables msg_data and spad_data NTB: perf: Fix an error code in perf_setup_inbuf() NTB: Fix an error code in ntb_msit_probe() ntb: intel: remove invalid email address in header comment
2021-09-05NTB: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2021-09-05ntb: ntb_pingpong: remove redundant initialization of variables msg_data and ↵Colin Ian King
spad_data The variables msg_data and spad_data are being initialized with values that are never read, they are being updated later on. The initializations are redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2021-09-04NTB: perf: Fix an error code in perf_setup_inbuf()Yang Li
When the function IS_ALIGNED() returns false, the value of ret is 0. So, we set ret to -EINVAL to indicate this error. Clean up smatch warning: drivers/ntb/test/ntb_perf.c:602 perf_setup_inbuf() warn: missing error code 'ret'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2021-09-04NTB: Fix an error code in ntb_msit_probe()Yang Li
When the value of nm->isr_ctx is false, the value of ret is 0. So, we set ret to -ENOMEM to indicate this error. Clean up smatch warning: drivers/ntb/test/ntb_msi_test.c:373 ntb_msit_probe() warn: missing error code 'ret'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2021-09-04ntb: intel: remove invalid email address in header commentDave Jiang
Remove Jon's old email address. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2021-07-21bus: Make remove callback return voidUwe Kleine-König
The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-23NTB: Add support for EPF PCI Non-Transparent BridgeKishon Vijay Abraham I
Add support for EPF PCI Non-Transparent Bridge (NTB) devices. This driver is platform independent and may be used by any platform that has multiple PCI endpoint instances configured using the pci-epf-ntb driver. The driver connnects to the standard NTB subsystem interface. The EPF NTB device has a configurable number of memory windows (max 4), a configurable number of doorbells (max 32), and a configurable number of scratch-pad registers. Link: https://lore.kernel.org/r/20210201195809.7342-16-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com>
2020-12-27Merge tag 'ntb-5.11' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB fixes from Jon Mason: "Bug fix for IDT NTB and Intel NTB LTR management support" * tag 'ntb-5.11' of git://github.com/jonmason/ntb: ntb: intel: add Intel NTB LTR vendor support for gen4 NTB ntb: idt: fix error check in ntb_hw_idt.c
2020-12-15NTB/msi: Use irq_has_action()Thomas Gleixner
Use the proper core function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20201210194044.255887860@linutronix.de
2020-12-06ntb: intel: add Intel NTB LTR vendor support for gen4 NTBDave Jiang
Intel NTB device has custom LTR management that is not compliant with the PCIe standard. Add support to set LTR status triggered by link status change. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-12-06ntb: idt: fix error check in ntb_hw_idt.cWang Qing
idt_create_dev never return NULL and fix smatch warning. Signed-off-by: Wang Qing <wangqing@vivo.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-10-25Merge tag 'ntb-5.10' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB fixes from Jon Mason. * tag 'ntb-5.10' of git://github.com/jonmason/ntb: NTB: Use struct_size() helper in devm_kzalloc() ntb: intel: Fix memleak in intel_ntb_pci_probe NTB: hw: amd: fix an issue about leak system resources
2020-08-24NTB: Use struct_size() helper in devm_kzalloc()Gustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. Also, remove unnecessary variable _struct_size_. This code was detected with the help of Coccinelle and, audited and fixed manually. Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-08-24ntb: intel: Fix memleak in intel_ntb_pci_probeDinghao Liu
The default error branch of a series of pdev_is_gen calls should free ndev just like what we've done in these calls. Fixes: 26bfe3d0b227 ("ntb: intel: Add Icelake (gen4) support for Intel NTB") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-08-23NTB: hw: amd: fix an issue about leak system resourcesKaige Li
The related system resources were not released when pci_set_dma_mask(), pci_set_consistent_dma_mask(), or pci_iomap() return error in the amd_ntb_init_pci() function. Add pci_release_regions() to fix it. Fixes: a1b3695820aa ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge") Signed-off-by: Kaige Li <likaige@loongson.cn> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-14ntb: intel: constify ioreadX() iomem argument (as in generic implementation)Krzysztof Kozlowski
The ioreadX() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jakub Kicinski <kuba@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200709072837.5869-4-krzk@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-05NTB: perf: Fix race condition when run with ntb_testLogan Gunthorpe
When running ntb_test, the script tries to run the ntb_perf test immediately after probing the modules. Since adding multi-port support, this fails seeing the new initialization procedure in ntb_perf can not complete instantly. To fix this we add a completion which is waited on when a test is started. In this way, run can be written any time after the module is loaded and it will wait for the initialization to complete instead of sending an error. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05NTB: perf: Fix support for hardware that doesn't have port numbersLogan Gunthorpe
Legacy drivers do not have port numbers (but is reliably only two ports) and was broken by the recent commit that added mult-port support to ntb_perf. This is especially important to support the cross link topology which is perfectly symmetric and cannot assign unique port numbers easily. Hardware that returns zero for both the local port and the peer should just always use gidx=0 for the only peer. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05NTB: perf: Don't require one more memory window than number of peersLogan Gunthorpe
ntb_perf should not require more than one memory window per peer. This was probably an off-by-one error. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05NTB: ntb_pingpong: Choose doorbells based on port numberLogan Gunthorpe
This commit fixes pingpong support for existing drivers that do not implement ntb_default_port_number() and ntb_default_peer_port_number(). This is required for hardware (like the crosslink topology of switchtec) which cannot assign reasonable port numbers to each port due to its perfect symmetry. Instead of picking the doorbell to use based on the the index of the peer, we use the peer's port number. This is a bit clearer and easier to understand. Fixes: c7aeb0afdcc2 ("NTB: ntb_pp: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05NTB: Fix the default port and peer numbers for legacy driversLogan Gunthorpe
When the commit adding ntb_default_port_number() and ntb_default_peer_port_number() entered the kernel there was no users of it so it was impossible to tell what the API needed. When a user finally landed a year later (ntb_pingpong) there were more NTB topologies were created and no consideration was considered to how other drivers had changed. Now that there is a user it can be fixed to provide a sensible default for the legacy drivers that do not implement ntb_{peer_}port_number(). Seeing ntb_pingpong doesn't check error codes returning EINVAL was also not sensible. Patches for ntb_pingpong and ntb_perf follow (which are broken otherwise) to support hardware that doesn't have port numbers. This is important not only to not break support with existing drivers but for the cross link topology which, due to its perfect symmetry, cannot assign unique port numbers to each side. Fixes: 1e5301196a88 ("NTB: Add indexed ports NTB API") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05NTB: Revert the change to use the NTB device dev for DMA allocationsLogan Gunthorpe
Commit 417cf39cfea9 ("NTB: Set dma mask and dma coherent mask to NTB devices") started using the NTB device for DMA allocations which was turns out was wrong. If the IOMMU is enabled, such alloctanions will always fail with messages such as: DMAR: Allocating domain for 0000:02:00.1 failed This is because the IOMMU has not setup the device for such use. Change the tools back to using the PCI device for allocations seeing it doesn't make sense to add an IOMMU group for the non-physical NTB device. Also remove the code that sets the DMA mask as it no longer makes sense to do this. Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05NTB: ntb_tool: reading the link file should not end in a NULL byteLogan Gunthorpe
When running ntb_test this warning is issued: ./ntb_test.sh: line 200: warning: command substitution: ignored null byte in input This is caused by the kernel returning one more byte than is necessary when reading the link file. Reduce the number of bytes read back to 2 as it was before the commit that regressed this. Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb_perf: avoid false dma unmap of destination addressSanjay R Mehta
The DMA map and unmap of destination address is already being done in perf_init_test() and perf_clear_test() functions. Hence avoiding it by making necessary changes in perf_copy_chunk() function. Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb_perf: increase sleep time from one milli sec to one secSanjay R Mehta
After trying to send commands for a maximum of MSG_TRIES re-tries, link-up fails due to short sleep time(1ms) between re-tries. Hence increasing the sleep time to one second providing sufficient time for perf link-up. Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb_tool: pass correct struct device to dma_alloc_coherentSanjay R Mehta
Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb_perf: pass correct struct device to dma_alloc_coherentSanjay R Mehta
Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb: hw: remove the code that sets the DMA maskLogan Gunthorpe
This patch removes the code that sets the DMA mask as it no longer makes sense to do this. Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb: intel: fix static declarationDave Jiang
intel_ntb4_link_disable() missing static declaration. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb: intel: add hw workaround for NTB BAR alignmentDave Jiang
Add NTB_HWERR_BAR_ALIGN hw errata flag to work around issue where the aligment for the XLAT base must be BAR size aligned rather than 4k page aligned. On ICX platform, the XLAT base can be 4k page size aligned rather than BAR size aligned unlike the previous gen Intel NTB. However, a silicon errata prevented this from working as expected and a workaround is introduced to resolve the issue. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-04-20ntb: intel: Add Icelake (gen4) support for Intel NTBDave Jiang
Adding 4th generation Intel NTB support bits. There are a lot of common parts that the gen4 NTB has with gen3 NTB on Skylake. The commonalities are reused in gen4 Icelake NTB. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>