summaryrefslogtreecommitdiff
path: root/include/scsi
AgeCommit message (Collapse)Author
2021-07-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, ibmvfc, megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with elx and mpi3mr being new drivers. The major core change is a rework to drop the status byte handling macros and the old bit shifted definitions and the rest of the updates are minor fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits) scsi: aha1740: Avoid over-read of sense buffer scsi: arcmsr: Avoid over-read of sense buffer scsi: ips: Avoid over-read of sense buffer scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe() scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame() scsi: elx: libefc: Fix less than zero comparison of a unsigned int scsi: elx: efct: Fix pointer error checking in debugfs init scsi: elx: efct: Fix is_originator return code type scsi: elx: efct: Fix link error for _bad_cmpxchg scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel() scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session() scsi: elx: efct: Fix error handling in efct_hw_init() scsi: elx: efct: Remove redundant initialization of variable lun scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected" scsi: lpfc: Fix build error in lpfc_scsi.c scsi: target: iscsi: Remove redundant continue statement scsi: qla4xxx: Remove redundant continue statement scsi: ppa: Switch to use module_parport_driver() scsi: imm: Switch to use module_parport_driver() scsi: mpt3sas: Fix error return value in _scsih_expander_add() ...
2021-06-10scsi: fc: FDMI enhancementJaved Hasan
Added RHBA and RPA attributes type and length. As per FC_GC_7 document section "Table 400 – Attribute Entry Types and associated Values" ASCII type attributes length can be vary from "4 to 256 byte". If we keep all RHBA ASCII attributes length 256 then total length is going upto 2750, which is far more than 2048 (max frame size). In libfc we do have logic to split FCP commands but not for CT commands. Practically all version/names get covered with in 64 bytes except OS name, for that we need 128 bytes. Hence length of all RBHA ASCII attributes is reduced to 64 bytes and 128 bytes in case of OS name. RPA attributes total length is within frame size. Link: https://lore.kernel.org/r/20210603121623.10084-6-jhasan@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-10scsi: libfc: Add FDMI-2 attributesJaved Hasan
Add all attributes for RHBA and RPA registration. Fallback mechanism is added between RBHA V2 and RHBA V1 attributes. In case RHBA get fails for V2 attributes we fall back to V1 attribute registration. Link: https://lore.kernel.org/r/20210603121623.10084-4-jhasan@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-09scsi: fc: Correct RHBA attributes lengthJaved Hasan
As per the FC-GS-5 specification, attribute lengths of node_name and manufacturer should in range of "4 to 64 Bytes" only. Link: https://lore.kernel.org/r/20210603101404.7841-2-jhasan@marvell.com Fixes: e721eb0616f6 ("scsi: scsi_transport_fc: Match HBA Attribute Length with HBAAPI V2.0 definitions") CC: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: core: Change the type of the second argument of ↵Bart Van Assche
scsi_host_complete_all_commands() Allow the compiler to verify the type of the second argument passed to scsi_host_complete_all_commands(). Link: https://lore.kernel.org/r/20210524025457.11299-4-bvanassche@acm.org Cc: Hannes Reinecke <hare@suse.com> Cc: John Garry <john.garry@huawei.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: core: Introduce enums for the SAM and host status codesBart Van Assche
Make it possible for the compiler to verify whether SAM and host status codes are used correctly. [mkp: resolve conflicts with Hannes' SCSI result series] Link: https://lore.kernel.org/r/20210524025457.11299-3-bvanassche@acm.org Cc: Hannes Reinecke <hare@suse.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: libsas: Introduce more SAM status code aliases in enum exec_statusBart Van Assche
This patch prepares for converting SAM status codes into an enum. Without this patch converting SAM status codes into an enumeration type would trigger complaints about enum type mismatches for the SAS code. Link: https://lore.kernel.org/r/20210524025457.11299-2-bvanassche@acm.org Cc: Hannes Reinecke <hare@suse.com> Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02Merge branch '5.14/scsi-result' into 5.14/scsi-stagingMartin K. Petersen
Include Hannes' SCSI command result rework in the staging branch. [mkp: remove DRIVER_SENSE from mpi3mr] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Hold task ref during TMF timeout handlingMike Christie
For aborts, qedi needs to cleanup the FW then send the TMF from a worker thread. While it's doing these the cmd could complete normally and the TMF could time out. libiscsi would then complete the iscsi_task which will call into the driver to cleanup the driver level resources while it still might be accessing them for the cleanup/abort. This has iscsi_eh_abort keep the iscsi_task ref if the TMF times out, so qedi does not have to worry about if the task is being freed while in use and does not need to get its own ref. Link: https://lore.kernel.org/r/20210525181821.7617-18-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Fix conn use after free during resetsMike Christie
If we haven't done a unbind target call we can race where iscsi_conn_teardown wakes up the EH thread and then frees the conn while those threads are still accessing the conn ehwait. We can only do one TMF per session so this just moves the TMF fields from the conn to the session. We can then rely on the iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call to remove the target and it's devices, and know after that point there is no device or scsi-ml callout trying to access the session. Link: https://lore.kernel.org/r/20210525181821.7617-14-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Add iscsi_cls_conn refcount helpersMike Christie
There are a couple places where we could free the iscsi_cls_conn while it's still in use. This adds some helpers to get/put a refcount on the struct and converts an exiting user. Subsequent commits will then use the helpers to fix 2 bugs in the eh code. Link: https://lore.kernel.org/r/20210525181821.7617-11-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Fix in-kernel conn failure handlingMike Christie
Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space") has the following regressions/bugs that this patch fixes: 1. It can return cmds to upper layers like dm-multipath where that can retry them. After they are successful the fs/app can send new I/O to the same sectors, but we've left the cmds running in FW or in the net layer. We need to be calling ep_disconnect if userspace is not up. This patch only fixes the issue for offload drivers. iscsi_tcp will be fixed in separate commit because it doesn't have a ep_disconnect call. 2. The drivers that implement ep_disconnect expect that it's called before conn_stop. Besides crashes, if the cleanup_task callout is called before ep_disconnect it might free up driver/card resources for session1 then they could be allocated for session2. But because the driver's ep_disconnect is not called it has not cleaned up the firmware so the card is still using the resources for the original cmd. 3. The stop_conn_work_fn can run after userspace has done its recovery and we are happily using the session. We will then end up with various bugs depending on what is going on at the time. We may also run stop_conn_work_fn late after userspace has called stop_conn and ep_disconnect and is now going to call start/bind conn. If stop_conn_work_fn runs after bind but before start, we would leave the conn in a unbound but sort of started state where IO might be allowed even though the drivers have been set in a state where they no longer expect I/O. 4. Returning -EAGAIN in iscsi_if_destroy_conn if we haven't yet run the in kernel stop_conn function is breaking userspace. We should have been doing this for the caller. Link: https://lore.kernel.org/r/20210525181821.7617-8-michael.christie@oracle.com Fixes: 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Rel ref after iscsi_lookup_endpoint()Mike Christie
Subsequent commits allow the kernel to do ep_disconnect. In that case we will have to get a proper refcount on the ep so one thread does not delete it from under another. Link: https://lore.kernel.org/r/20210525181821.7617-7-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Stop queueing during ep_disconnectMike Christie
During ep_disconnect we have been doing iscsi_suspend_tx/queue to block new I/O but every driver except cxgbi and iscsi_tcp can still get I/O from __iscsi_conn_send_pdu() if we haven't called iscsi_conn_failure() before ep_disconnect. This could happen if we were terminating the session, and the logout timed out before it was even sent to libiscsi. Fix the issue by adding a helper which reverses the bind_conn call that allows new I/O to be queued. Drivers implementing ep_disconnect can use this to make sure new I/O is not queued to them when handling the disconnect. Link: https://lore.kernel.org/r/20210525181821.7617-3-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Add task completion helperMike Christie
This adds a helper to detect if a cmd has completed but is not yet freed. Link: https://lore.kernel.org/r/20210525181821.7617-2-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31scsi: core: Drop obsolete Linux-specific SCSI status codesHannes Reinecke
Originally the SCSI subsystem has been using 'special' SCSI status codes, which were the SAM-specified ones but shifted by 1. As most drivers have now been modified to use the SAM-specified ones, having two nearly identical sets of definitions only causes confusion. The Linux-specifed SCSI status codes have been marked obsolete for several years so drop them and use the SAM-specified status codes throughout. Link: https://lore.kernel.org/r/20210427083046.31620-41-hare@suse.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31scsi: core: Drop message byte helperHannes Reinecke
The message byte is now unused, so we can drop the helper to set the message byte and the check for message bytes during error recovery. Link: https://lore.kernel.org/r/20210427083046.31620-38-hare@suse.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31scsi: core: Add scsi_msg_to_host_byte()Hannes Reinecke
Add helper to convert message byte into a host byte code. Link: https://lore.kernel.org/r/20210427083046.31620-18-hare@suse.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31scsi: core: Add get_{status,host}_byte() accessor functionsHannes Reinecke
Add accessor functions for the host and status byte. Link: https://lore.kernel.org/r/20210427083046.31620-17-hare@suse.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31scsi: core: Drop the now obsolete driver_byte definitionsHannes Reinecke
The driver_byte field in the result is now unused, so we can drop the definitions. Link: https://lore.kernel.org/r/20210427083046.31620-15-hare@suse.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31scsi: core: Kill DRIVER_SENSEHannes Reinecke
Replace the check for DRIVER_SENSE with a check for scsi_status_is_check_condition(). Audit all callsites to ensure the SAM status is set correctly. For backwards compability move the DRIVER_SENSE definition to sg.h, and update sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever SAM_STAT_CHECK_CONDITION is present. [mkp: fix zeroday srp warning] Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.de Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> fix
2021-05-31scsi: core: Introduce scsi_status_is_check_condition()Hannes Reinecke
Add a helper function scsi_status_is_check_condition() to encapsulate the frequent checks for SAM_STAT_CHECK_CONDITION. Link: https://lore.kernel.org/r/20210427083046.31620-9-hare@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31scsi: core: Introduce scsi_build_sense()Hannes Reinecke
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer() to format the buffer and set the correct SCSI status. Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31scsi: core: Stop using DRIVER_ERRORHannes Reinecke
Return the actual error code in __scsi_execute() (which, according to the documentation, should have happened anyway). And audit all callers to cope with negative return values from __scsi_execute() and friends. [mkp: resolve conflict and return bool] Link: https://lore.kernel.org/r/20210427083046.31620-7-hare@suse.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-28RDMA/srp: Apply the __packed attribute to members instead of structuresBart Van Assche
Applying the __packed attribute to an entire data structure results in suboptimal code on architectures that do not support unaligned accesses. Hence apply the __packed attribute only to those data members that are not naturally aligned. Link: https://lore.kernel.org/r/20210524041211.9480-4-bvanassche@acm.org Cc: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-05-21scsi: Fix spelling mistakes in header filesZhen Lei
Fix some spelling mistakes in comments: pathes ==> paths Resouce ==> Resource retreived ==> retrieved recevied ==> received interruped ==> interrupted [mkp: kept 'keep-alives' and 'busses'] Link: https://lore.kernel.org/r/20210517095945.7363-1-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-15scsi: target: core: Add the VERSION DESCRIPTOR fields to the INQUIRY dataKonstantin Shelekhin
Extend the standard INQUIRY data to 96 bytes and fill in the VERSION DESCRIPTOR fields. The layout follows SPC-4: - SCSI architecture standard - SCSI transport protocol standard - SCSI primary command set standard - SCSI device type command set standard All version descriptor values are defined as "no version claimed" because some initiators fail to recognize anything else. [mkp: whitespace] Link: https://lore.kernel.org/r/20210513192804.1252142-3-k.shelekhin@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-10scsi: core: Treat device offline as a failureJason Yan
When a SCSI device is offline a MODE SENSE command will return a result with only DID_NO_CONNECT set. In sd_read_write_protect_flag() only the status byte of the result is checked. Despite a returned status of DID_NO_CONNECT the command is considered successful and we read sdkp->write_prot from a buffer containing garbage. Modify scsi_status_is_good() to treat DID_NO_CONNECT as a failure case. Link: https://lore.kernel.org/r/20210330114727.234467-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, target, tcmu, smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx). The major core change is using a sbitmap instead of an atomic for queue tracking" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits) scsi: target: tcm_fc: Fix a kernel-doc header scsi: target: Shorten ALUA error messages scsi: target: Fix two format specifiers scsi: target: Compare explicitly with SAM_STAT_GOOD scsi: sd: Introduce a new local variable in sd_check_events() scsi: dc395x: Open-code status_byte(u8) calls scsi: 53c700: Open-code status_byte(u8) calls scsi: smartpqi: Remove unused functions scsi: qla4xxx: Remove an unused function scsi: myrs: Remove unused functions scsi: myrb: Remove unused functions scsi: mpt3sas: Fix two kernel-doc headers scsi: fcoe: Suppress a compiler warning scsi: libfc: Fix a format specifier scsi: aacraid: Remove an unused function scsi: core: Introduce enum scsi_disposition scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case scsi: core: Rename scsi_softirq_done() into scsi_complete() scsi: core: Remove an incorrect comment scsi: core: Make the scsi_alloc_sgtables() documentation more accurate ...
2021-04-28Merge tag 'for-5.13/block-2021-04-27' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: "Pretty quiet round this time, which is nice. In detail: - Series revamping bounce buffer support (Christoph) - Dead code removal (Christoph, Bart) - Partition iteration revamp, now using xarray (Christoph) - Passthrough request scheduler improvements (Lin) - Series of BFQ improvements (Paolo) - Fix ioprio task iteration (Peter) - Various little tweaks and fixes (Tejun, Saravanan, Bhaskar, Max, Nikolay)" * tag 'for-5.13/block-2021-04-27' of git://git.kernel.dk/linux-block: (41 commits) blk-iocost: don't ignore vrate_min on QD contention blk-mq: Fix spurious debugfs directory creation during initialization bfq/mq-deadline: remove redundant check for passthrough request blk-mq: bypass IO scheduler's limit_depth for passthrough request block: Remove an obsolete comment from sg_io() block: move bio_list_copy_data to pktcdvd block: remove zero_fill_bio_iter block: add queue_to_disk() to get gendisk from request_queue block: remove an incorrect check from blk_rq_append_bio block: initialize ret in bdev_disk_changed block: Fix sys_ioprio_set(.which=IOPRIO_WHO_PGRP) task iteration block: remove disk_part_iter block: simplify diskstats_show block: simplify show_partition block: simplify printk_all_partitions block: simplify partition_overlaps block: simplify partition removal block: take bd_mutex around delete_partitions in del_gendisk block: refactor blk_drop_partitions block: move more syncing and invalidation to delete_partition ...
2021-04-27Fix misc new gcc warningsLinus Torvalds
It seems like Fedora 34 ends up enabling a few new gcc warnings, notably "-Wstringop-overread" and "-Warray-parameter". Both of them cause what seem to be valid warnings in the kernel, where we have array size mismatches in function arguments (that are no longer just silently converted to a pointer to element, but actually checked). This fixes most of the trivial ones, by making the function declaration match the function definition, and in the case of intel_pm.c, removing the over-specified array size from the argument declaration. At least one 'stringop-overread' warning remains in the i915 driver, but that one doesn't have the same obvious trivial fix, and may or may not actually be indicative of a bug. [ It was a mistake to upgrade one of my machines to Fedora 34 while being busy with the merge window, but if this is the extent of the compiler upgrade problems, things are better than usual - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-15scsi: core: Introduce enum scsi_dispositionBart Van Assche
Improve readability of the code in the SCSI core by introducing an enumeration type for the values used internally that decide how to continue processing a SCSI command. The eh_*_handler return values have not been changed because that would involve modifying all SCSI drivers. The output of the following command has been inspected to verify that no out-of-range values are assigned to a variable of type enum scsi_disposition: KCFLAGS=-Wassign-enum make CC=clang W=1 drivers/scsi/ Link: https://lore.kernel.org/r/20210415220826.29438-6-bvanassche@acm.org Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: core: Remove an incorrect commentBart Van Assche
scsi_device.sdev_target is used in more code than the single_lun code, hence remove the comment next to the definition of the sdev_target member. Link: https://lore.kernel.org/r/20210415220826.29438-3-bvanassche@acm.org Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-06scsi: remove the unchecked_isa_dma flagChristoph Hellwig
Remove the unchecked_isa_dma now that all users are gone. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210331073001.46776-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-05Merge branch '5.12/scsi-fixes' into 5.13/scsi-stagingMartin K. Petersen
Pull 5.12/scsi-fixes into the 5.13 SCSI tree to provide a baseline for some UFS changes that would otherwise cause conflicts during the merge. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-01scsi: fcoe: Fix mismatched fcoe_wwn_from_mac declarationArnd Bergmann
An old cleanup changed the array size from MAX_ADDR_LEN to unspecified in the declaration, but now gcc-11 warns about this: drivers/scsi/fcoe/fcoe_ctlr.c:1972:37: error: argument 1 of type ‘unsigned char[32]’ with mismatched bound [-Werror=array-parameter=] 1972 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], | ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~ In file included from /git/arm-soc/drivers/scsi/fcoe/fcoe_ctlr.c:33: include/scsi/libfcoe.h:252:37: note: previously declared as ‘unsigned char[]’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[], unsigned int, unsigned int); | ~~~~~~~~~~~~~~^~~~~ Change the type back to what the function definition uses. Link: https://lore.kernel.org/r/20210322164702.957810-1-arnd@kernel.org Fixes: fdd78027fd47 ("[SCSI] fcoe: cleans up libfcoe.h and adds fcoe.h for fcoe module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29scsi: core: scsi_host_cmd_pool is declared twiceWan Jiabing
struct scsi_host_cmd_pool has already been declared. Remove the duplicate. Link: https://lore.kernel.org/r/20210325064632.855002-1-wanjiabing@vivo.com Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29scsi: iscsi: Fix race condition between login and sync threadGulam Mohamed
A kernel panic was observed due to a timing issue between the sync thread and the initiator processing a login response from the target. The session reopen can be invoked both from the session sync thread when iscsid restarts and from iscsid through the error handler. Before the initiator receives the response to a login, another reopen request can be sent from the error handler/sync session. When the initial login response is subsequently processed, the connection has been closed and the socket has been released. To fix this a new connection state, ISCSI_CONN_BOUND, is added: - Set the connection state value to ISCSI_CONN_DOWN upon iscsi_if_ep_disconnect() and iscsi_if_stop_conn() - Set the connection state to the newly created value ISCSI_CONN_BOUND after bind connection (transport->bind_conn()) - In iscsi_set_param(), return -ENOTCONN if the connection state is not either ISCSI_CONN_BOUND or ISCSI_CONN_UP Link: https://lore.kernel.org/r/20210325093248.284678-1-gulam.mohamed@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> index 91074fd97f64..f4bf62b007a0 100644
2021-03-24scsi: scsi_dh: Fix a typoBhaskar Chowdhury
s/infrastruture/infrastructure/ [mkp: combined .c and .h patches] Link: https://lore.kernel.org/r/20210322064724.4108343-1-unixbhaskar@gmail.com Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> frog
2021-03-04scsi: core: Add mq_poll support to SCSI layerKashyap Desai
Currently IOPOLL support is only available in block layer. This patch adds mq_poll support to the SCSI layer. Link: https://lore.kernel.org/r/20210215074048.19424-2-kashyap.desai@broadcom.com Cc: sumit.saxena@broadcom.com Cc: chandrakanth.patil@broadcom.com Cc: linux-block@vger.kernel.org Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: core: Replace sdev->device_busy with sbitmapMing Lei
SCSI currently uses an atomic variable to track queue depth for each attached device. The queue depth depends on many factors such as transport type and device implementation. In addition, the SCSI device queue depth is not a static entity but changes over time as a result of congestion management. While blk-mq currently tracks queue depth for each hctx, it can't easily be changed to accommodate the SCSI per-device requirement. The current approach of using an atomic variable doesn't scale well when there are lots of CPU cores and the disk is very fast. IOPS can be substantially impacted by the atomic in the hot path. Replace the atomic variable sdev->device_busy with an sbitmap for tracking the SCSI device queue depth. It has been observed that IOPS is improved ~30% by this patchset in the following test: 1) test machine(32 logical CPU cores) Thread(s) per core: 2 Core(s) per socket: 8 Socket(s): 2 NUMA node(s): 2 Model name: Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz 2) setup scsi_debug: modprobe scsi_debug virtual_gb=128 max_luns=1 submit_queues=32 delay=0 max_queue=256 3) fio script: fio --rw=randread --size=128G --direct=1 --ioengine=libaio --iodepth=2048 \ --numjobs=32 --bs=4k --group_reporting=1 --group_reporting=1 --runtime=60 \ --loops=10000 --name=job1 --filename=/dev/sdN [mkp: fix device_busy reference in mpt3sas] Link: https://lore.kernel.org/r/20210122023317.687987-14-ming.lei@redhat.com Link: https://lore.kernel.org/linux-block/20200119071432.18558-6-ming.lei@redhat.com/ Cc: Omar Sandoval <osandov@fb.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: core: Add scsi_device_busy() wrapperMing Lei
Add scsi_device_busy() helper to prepare drivers for tracking device queue depth via sbitmap_queue. Link: https://lore.kernel.org/r/20210122023317.687987-12-ming.lei@redhat.com Cc: Omar Sandoval <osandov@fb.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Cc: Ewan D. Milne <emilne@redhat.com> Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: core: Put hot fields of scsi_host_template in one cachelineMing Lei
The following three fields of scsi_host_template are referenced in the SCSI I/O submission hot path. Put them together in one cacheline: - cmd_size - queuecommand - commit_rqs Link: https://lore.kernel.org/r/20210122023317.687987-10-ming.lei@redhat.com Cc: Omar Sandoval <osandov@fb.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: blk-mq: Add callbacks for storing & retrieving budget tokenMing Lei
Since SCSI is the only driver which requires dispatch budget move the token from struct request to struct scsi_cmnd. Link: https://lore.kernel.org/r/20210122023317.687987-8-ming.lei@redhat.com Cc: Omar Sandoval <osandov@fb.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-08scsi: libiscsi: Add helper to calculate max SCSI cmds per sessionMike Christie
This patch just breaks out the code that calculates the number of SCSI cmds that will be used for a SCSI session. It also adds a check that we don't go over the host's can_queue value. Link: https://lore.kernel.org/r/20210207044608.27585-6-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-08scsi: libiscsi: Drop taskqueuelockMike Christie
The purpose of the taskqueuelock was to handle the issue where a bad target decides to send a R2T and before its data has been sent decides to send a cmd response to complete the cmd. The following patches fix up the frwd/back locks so they are taken from the queue/xmit (frwd) and completion (back) paths again. To get there this patch removes the taskqueuelock which for iSCSI xmit wq based drivers was taken in the queue, xmit and completion paths. Instead of the lock, we just make sure we have a ref to the task when we queue a R2T, and then we always remove the task from the requeue list in the xmit path or the forced cleanup paths. Link: https://lore.kernel.org/r/20210207044608.27585-3-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: libsas: Remove temporarily-added _gfp() API variantsAhmed S. Darwish
These variants were added for bisectability. Remove them, as all call sites have now been convertd to use the original API. Link: https://lore.kernel.org/r/20210118100955.1761652-20-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: libsas: Add gfp_t flags parameter to event notificationsAhmed S. Darwish
All call-sites of below libsas APIs: - sas_alloc_event() - sas_notify_port_event() - sas_notify_phy_event() have been converted to use the _gfp()-suffixed version. Modify the original APIs above to take a gfp_t flags parameter by default. For bisectability, call-sites will be modified again to use the original libsas APIs (while passing gfp_t). The temporary _gfp()-suffixed versions can then be removed. Link: https://lore.kernel.org/r/20210118100955.1761652-13-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: libsas: Introduce a _gfp() variant of event notifiersAhmed S. Darwish
sas_alloc_event() uses in_interrupt() to decide which allocation should be used. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The in_interrupt() check is also only partially correct, because it fails to choose the correct code path when just preemption or interrupts are disabled. For example, as in the following call chain: mvsas/mv_sas.c: mvs_work_queue() [process context] spin_lock_irqsave(mvs_info::lock, ) -> libsas/sas_event.c: sas_notify_phy_event() -> sas_alloc_event() -> in_interrupt() = false -> invalid GFP_KERNEL allocation -> libsas/sas_event.c: sas_notify_port_event() -> sas_alloc_event() -> in_interrupt() = false -> invalid GFP_KERNEL allocation Introduce sas_alloc_event_gfp(), sas_notify_port_event_gfp(), and sas_notify_phy_event_gfp(), which all behave like the non _gfp() variants but use a caller-passed GFP mask for allocations. For bisectability, all callers will be modified first to pass GFP context, then the non _gfp() libsas API variants will be modified to take a gfp_t by default. Link: https://lore.kernel.org/r/20210118100955.1761652-4-a.darwish@linutronix.de Fixes: 1c393b970e0f ("scsi: libsas: Use dynamic alloced work to avoid sas event lost") Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: libsas: Remove notifier indirectionJohn Garry
LLDDs report events to libsas with .notify_port_event and .notify_phy_event callbacks. These callbacks are fixed and so there is no reason why the functions cannot be called directly, so do that. This neatens the code slightly, makes it more obvious, and reduces function pointer usage, which is generally a good thing. Downside is that there are 2x more symbol exports. [a.darwish@linutronix.de: Remove the now unused "sas_ha" local variables] Link: https://lore.kernel.org/r/20210118100955.1761652-3-a.darwish@linutronix.de Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>