summaryrefslogtreecommitdiff
path: root/include/uapi
AgeCommit message (Collapse)Author
2015-04-15Merge tag 'sound-4.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There have been major modernization with the standard bus: in ALSA sequencer core and HD-audio. Also, HD-audio receives the regmap support replacing the in-house cache register cache code. These changes shouldn't impact the existing behavior, but rather refactoring. In addition, HD-audio got the code split to a core library part and the "legacy" driver parts. This is a preliminary work for adapting the upcoming ASoC HD-audio driver, and the whole transition is still work in progress, likely finished in 4.1. Along with them, there are many updates in ASoC area as usual, too: lots of cleanups, Intel code shuffling, etc. Here are some highlights: ALSA core: - PCM: the audio timestamp / wallclock enhancement - PCM: fixes in DPCM management - Fixes / cleanups of user-space control element management - Sequencer: modernization using the standard bus HD-audio: - Modernization using the standard bus - Regmap support - Use standard runtime PM for codec power saving - Widget-path based power-saving for IDT, VIA and Realtek codecs - Reorganized sysfs entries for each codec object - More Dell headset support ASoC: - Move of jack registration to the card level - Lots of ASoC cleanups, mainly moving things from the CODEC level to the card level - Support for DAPM routes specified by both the machine driver and DT - Continuing improvements to rcar - pcm512x enhacements - Intel platforms updates - rt5670 updates / fixes - New platforms / devices: some non-DSP Qualcomm platforms, Google's Storm platform, Maxmim MAX98925 CODECs and the Ingenic JZ4780 SoC Misc: - ice1724: Improved ESI W192M support - emu10k1: Emu 1010 fixes/enhancement" * tag 'sound-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits) ALSA: hda - set GET bit when adding a vendor verb to the codec regmap ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T450 ALSA: hda - Fix another race in runtime PM refcounting ALSA: hda - Expose codec type sysfs ALSA: ctl: fix to handle several elements added by one operation for userspace element ASoC: Intel: fix array_size.cocci warnings ASoC: n810: Automatically disconnect non-connected pins ASoC: n810: Consistently pass the card DAPM context to n810_ext_control() ASoC: davinci-evm: Use card DAPM context to access widgets ASoC: mop500_ab8500: Use card DAPM context to access widgets ASoC: wm1133-ev1: Use card DAPM context to access widgets ASoC: atmel: Improve machine driver compile test coverage ASoC: atmel: Add dependency to SND_SOC_I2C_AND_SPI where necessary ALSA: control: Fix a typo of SNDRV_CTL_ELEM_ACCESS_TLV_* with SNDRV_CTL_TLV_OP_* ALSA: usb-audio: Don't attempt to get Microsoft Lifecam Cinema sample rate ASoC: rnsd: fix build regression without CONFIG_OF ALSA: emu10k1: add toggles for E-mu 1010 optical ports ALSA: ctl: fill identical information to return value when adding userspace elements ALSA: ctl: fix a bug to return no identical information in info operation for userspace controls ALSA: ctl: confirm to return all identical information in 'activate' event ...
2015-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add BQL support to via-rhine, from Tino Reichardt. 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers can support hw switch offloading. From Floria Fainelli. 3) Allow 'ip address' commands to initiate multicast group join/leave, from Madhu Challa. 4) Many ipv4 FIB lookup optimizations from Alexander Duyck. 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel Borkmann. 6) Remove the ugly compat support in ARP for ugly layers like ax25, rose, etc. And use this to clean up the neigh layer, then use it to implement MPLS support. All from Eric Biederman. 7) Support L3 forwarding offloading in switches, from Scott Feldman. 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed up route lookups even further. From Alexander Duyck. 9) Many improvements and bug fixes to the rhashtable implementation, from Herbert Xu and Thomas Graf. In particular, in the case where an rhashtable user bulk adds a large number of items into an empty table, we expand the table much more sanely. 10) Don't make the tcp_metrics hash table per-namespace, from Eric Biederman. 11) Extend EBPF to access SKB fields, from Alexei Starovoitov. 12) Split out new connection request sockets so that they can be established in the main hash table. Much less false sharing since hash lookups go direct to the request sockets instead of having to go first to the listener then to the request socks hashed underneath. From Eric Dumazet. 13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk. 14) Support stable privacy address generation for RFC7217 in IPV6. From Hannes Frederic Sowa. 15) Hash network namespace into IP frag IDs, also from Hannes Frederic Sowa. 16) Convert PTP get/set methods to use 64-bit time, from Richard Cochran. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits) fm10k: Bump driver version to 0.15.2 fm10k: corrected VF multicast update fm10k: mbx_update_max_size does not drop all oversized messages fm10k: reset head instead of calling update_max_size fm10k: renamed mbx_tx_dropped to mbx_tx_oversized fm10k: update xcast mode before synchronizing multicast addresses fm10k: start service timer on probe fm10k: fix function header comment fm10k: comment next_vf_mbx flow fm10k: don't handle mailbox events in iov_event path and always process mailbox fm10k: use separate workqueue for fm10k driver fm10k: Set PF queues to unlimited bandwidth during virtualization fm10k: expose tx_timeout_count as an ethtool stat fm10k: only increment tx_timeout_count in Tx hang path fm10k: remove extraneous "Reset interface" message fm10k: separate PF only stats so that VF does not display them fm10k: use hw->mac.max_queues for stats fm10k: only show actual queues, not the maximum in hardware fm10k: allow creation of VLAN on default vid fm10k: fix unused warnings ...
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "You will get the following new drivers: - Qualcomm PM8941 power key drver - ChipOne icn8318 touchscreen controller driver - Broadcom iProc touchscreen and keypad drivers - Semtech SX8654 I2C touchscreen controller driver ALPS driver now supports newer SS4 devices; Elantech got a fix that should make it work on some ASUS laptops; and a slew of other enhancements and random fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits) Input: alps - non interleaved V2 dualpoint has separate stick button bits Input: alps - fix touchpad buttons getting stuck when used with trackpoint Input: atkbd - document "no new force-release quirks" policy Input: ALPS - make alps_get_pkt_id_ss4_v2() and others static Input: ALPS - V7 devices can report 5-finger taps Input: ALPS - add support for SS4 touchpad devices Input: ALPS - refactor alps_set_abs_params_mt() Input: elantech - fix absolute mode setting on some ASUS laptops Input: atmel_mxt_ts - split out touchpad initialisation logic Input: atmel_mxt_ts - implement support for T100 touch object Input: cros_ec_keyb - fix clearing keyboard state on wakeup Input: gscps2 - drop pci_ids dependency Input: synaptics - allocate 3 slots to keep stability in image sensors Input: Revert "Revert "synaptics - use dmax in input_mt_assign_slots"" Input: MT - make slot assignment work for overcovered solutions mfd: tc3589x: enforce device-tree only mode Input: tc3589x - localize platform data Input: tsc2007 - Convert msecs to jiffies only once Input: edt-ft5x06 - remove EV_SYN event report Input: edt-ft5x06 - allow to setting the maximum axes value through the DT ...
2015-04-14Merge tag 'vfio-v4.1-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - VFIO platform bus driver support (Baptiste Reynal, Antonios Motakis, testing and review by Eric Auger) - Split VFIO irqfd support to separate module (Alex Williamson) - vfio-pci VGA arbiter client (Alex Williamson) - New vfio-pci.ids= module option (Alex Williamson) - vfio-pci D3 power state support for idle devices (Alex Williamson) * tag 'vfio-v4.1-rc1' of git://github.com/awilliam/linux-vfio: (30 commits) vfio-pci: Fix use after free vfio-pci: Move idle devices to D3hot power state vfio-pci: Remove warning if try-reset fails vfio-pci: Allow PCI IDs to be specified as module options vfio-pci: Add VGA arbiter client vfio-pci: Add module option to disable VGA region access vgaarb: Stub vga_set_legacy_decoding() vfio: Split virqfd into a separate module for vfio bus drivers vfio: virqfd_lock can be static vfio: put off the allocation of "minor" in vfio_create_group vfio/platform: implement IRQ masking/unmasking via an eventfd vfio: initialize the virqfd workqueue in VFIO generic code vfio: move eventfd support code for VFIO_PCI to a separate file vfio: pass an opaque pointer on virqfd initialization vfio: add local lock for virqfd instead of depending on VFIO PCI vfio: virqfd: rename vfio_pci_virqfd_init and vfio_pci_virqfd_exit vfio: add a vfio_ prefix to virqfd_enable and virqfd_disable and export vfio/platform: support for level sensitive interrupts vfio/platform: trigger an interrupt via eventfd vfio/platform: initial interrupts support code ...
2015-04-14Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf changes from Ingo Molnar: "Core kernel changes: - One of the more interesting features in this cycle is the ability to attach eBPF programs (user-defined, sandboxed bytecode executed by the kernel) to kprobes. This allows user-defined instrumentation on a live kernel image that can never crash, hang or interfere with the kernel negatively. (Right now it's limited to root-only, but in the future we might allow unprivileged use as well.) (Alexei Starovoitov) - Another non-trivial feature is per event clockid support: this allows, amongst other things, the selection of different clock sources for event timestamps traced via perf. This feature is sought by people who'd like to merge perf generated events with external events that were measured with different clocks: - cluster wide profiling - for system wide tracing with user-space events, - JIT profiling events etc. Matching perf tooling support is added as well, available via the -k, --clockid <clockid> parameter to perf record et al. (Peter Zijlstra) Hardware enablement kernel changes: - x86 Intel Processor Trace (PT) support: which is a hardware tracer on steroids, available on Broadwell CPUs. The hardware trace stream is directly output into the user-space ring-buffer, using the 'AUX' data format extension that was added to the perf core to support hardware constraints such as the necessity to have the tracing buffer physically contiguous. This patch-set was developed for two years and this is the result. A simple way to make use of this is to use BTS tracing, the PT driver emulates BTS output - available via the 'intel_bts' PMU. More explicit PT specific tooling support is in the works as well - will probably be ready by 4.2. (Alexander Shishkin, Peter Zijlstra) - x86 Intel Cache QoS Monitoring (CQM) support: this is a hardware feature of Intel Xeon CPUs that allows the measurement and allocation/partitioning of caches to individual workloads. These kernel changes expose the measurement side as a new PMU driver, which exposes various QoS related PMU events. (The partitioning change is work in progress and is planned to be merged as a cgroup extension.) (Matt Fleming, Peter Zijlstra; CPU feature detection by Peter P Waskiewicz Jr) - x86 Intel Haswell LBR call stack support: this is a new Haswell feature that allows the hardware recording of call chains, plus tooling support. To activate this feature you have to enable it via the new 'lbr' call-graph recording option: perf record --call-graph lbr perf report or: perf top --call-graph lbr This hardware feature is a lot faster than stack walk or dwarf based unwinding, but has some limitations: - It reuses the current LBR facility, so LBR call stack and branch record can not be enabled at the same time. - It is only available for user-space callchains. (Yan, Zheng) - x86 Intel Broadwell CPU support and various event constraints and event table fixes for earlier models. (Andi Kleen) - x86 Intel HT CPUs event scheduling workarounds. This is a complex CPU bug affecting the SNB,IVB,HSW families that results in counter value corruption. The mitigation code is automatically enabled and is transparent. (Maria Dimakopoulou, Stephane Eranian) The perf tooling side had a ton of changes in this cycle as well, so I'm only able to list the user visible changes here, in addition to the tooling changes outlined above: User visible changes affecting all tools: - Improve support of compressed kernel modules (Jiri Olsa) - Save DSO loading errno to better report errors (Arnaldo Carvalho de Melo) - Bash completion for subcommands (Yunlong Song) - Add 'I' event modifier for perf_event_attr.exclude_idle bit (Jiri Olsa) - Support missing -f to override perf.data file ownership. (Yunlong Song) - Show the first event with an invalid filter (David Ahern, Arnaldo Carvalho de Melo) User visible changes in individual tools: 'perf data': New tool for converting perf.data to other formats, initially for the CTF (Common Trace Format) from LTTng (Jiri Olsa, Sebastian Siewior) 'perf diff': Add --kallsyms option (David Ahern) 'perf list': Allow listing events with 'tracepoint' prefix (Yunlong Song) Sort the output of the command (Yunlong Song) 'perf kmem': Respect -i option (Jiri Olsa) Print big numbers using thousands' group (Namhyung Kim) Allow -v option (Namhyung Kim) Fix alignment of slab result table (Namhyung Kim) 'perf probe': Support multiple probes on different binaries on the same command line (Masami Hiramatsu) Support unnamed union/structure members data collection. (Masami Hiramatsu) Check kprobes blacklist when adding new events. (Masami Hiramatsu) 'perf record': Teach 'perf record' about perf_event_attr.clockid (Peter Zijlstra) Support recording running/enabled time (Andi Kleen) 'perf sched': Improve the performance of 'perf sched replay' on high CPU core count machines (Yunlong Song) 'perf report' and 'perf top': Allow annotating entries in callchains in the hists browser (Arnaldo Carvalho de Melo) Indicate which callchain entries are annotated in the TUI hists browser (Arnaldo Carvalho de Melo) Add pid/tid filtering to 'report' and 'script' commands (David Ahern) Consider PERF_RECORD_ events with cpumode == 0 in 'perf top', removing one cause of long term memory usage buildup, i.e. not processing PERF_RECORD_EXIT events (Arnaldo Carvalho de Melo) 'perf stat': Report unsupported events properly (Suzuki K. Poulose) Output running time and run/enabled ratio in CSV mode (Andi Kleen) 'perf trace': Handle legacy syscalls tracepoints (David Ahern, Arnaldo Carvalho de Melo) Only insert blank duration bracket when tracing syscalls (Arnaldo Carvalho de Melo) Filter out the trace pid when no threads are specified (Arnaldo Carvalho de Melo) Dump stack on segfaults (Arnaldo Carvalho de Melo) No need to explicitely enable evsels for workload started from perf, let it be enabled via perf_event_attr.enable_on_exec, removing some events that take place in the 'perf trace' before a workload is really started by it. (Arnaldo Carvalho de Melo) Allow mixing with tracepoints and suppressing plain syscalls. (Arnaldo Carvalho de Melo) There's also been a ton of infrastructure work done, such as the split-out of perf's build system into tools/build/ and other changes - see the shortlog and changelog for details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (358 commits) perf/x86/intel/pt: Clean up the control flow in pt_pmu_hw_init() perf evlist: Fix type for references to data_head/tail perf probe: Check the orphaned -x option perf probe: Support multiple probes on different binaries perf buildid-list: Fix segfault when show DSOs with hits perf tools: Fix cross-endian analysis perf tools: Fix error path to do closedir() when synthesizing threads perf tools: Fix synthesizing fork_event.ppid for non-main thread perf tools: Add 'I' event modifier for exclude_idle bit perf report: Don't call map__kmap if map is NULL. perf tests: Fix attr tests perf probe: Fix ARM 32 building error perf tools: Merge all perf_event_attr print functions perf record: Add clockid parameter perf sched replay: Use replay_repeat to calculate the runavg of cpu usage instead of the default value 10 perf sched replay: Support using -f to override perf.data file ownership perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files perf sched replay: Handle the dead halt of sem_wait when create_tasks() fails for any task perf sched replay: Fix the segmentation fault problem caused by pr_err in threads perf sched replay: Realloc the memory of pid_to_task stepwise to adapt to the different pid_max configurations ...
2015-04-14Merge tag 'trace-4.1-tracefs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracefs from Steven Rostedt: "This adds the new tracefs file system. This has been in linux-next for more than one release, as I had it ready for the 4.0 merge window, but a last minute thing that needed to go into Linux first had to be done. That was that perf hard coded the file system number when reading /sys/kernel/debugfs/tracing directory making sure that the path had the debugfs mount # before it would parse the tracing file. This broke other use cases of perf, and the check is removed. Now when mounting /sys/kernel/debug, tracefs is automatically mounted in /sys/kernel/debug/tracing such that old tools will still see that path as expected. But now system admins can mount tracefs directly and not need to mount debugfs, which can expose security issues. A new directory is created when tracefs is configured such that system admins can now mount it separately (/sys/kernel/tracing)" * tag 'trace-4.1-tracefs' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have mkdir and rmdir be part of tracefs tracefs: Add directory /sys/kernel/tracing tracing: Automatically mount tracefs on debugfs/tracing tracing: Convert the tracing facility over to use tracefs tracefs: Add new tracefs file system tracing: Create cmdline tracer options on tracing fs init tracing: Only create tracer options files if directory exists debugfs: Provide a file creation function that also takes an initial size
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - quite a few firmware fixes for RMI driver by Andrew Duggan - huion and uclogic drivers have been substantially overlaping in functionality laterly. This redundancy is fixed by hid-huion driver being merged into hid-uclogic; work done by Benjamin Tissoires and Nikolai Kondrashov - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg - Some of the quirks, that got separated into individual drivers, have historically had EXPERT dependency. As HID subsystem matured (as well as the individual drivers), this made less and less sense. This dependency is now being removed by patch from Jean Delvare - Logitech lg4ff driver received a couple of improvements for mode switching, by Michal Malý - multitouch driver now supports clickpads, patches by Benjamin Tissoires and Seth Forshee - hid-sensor framework received a substantial update; namely support for Custom and Generic pages is being added; work done by Srinivas Pandruvada - wacom driver received substantial update; it now supports i2c-conntected devices (Mika Westerberg), Bamboo PADs are now properly supported (Benjamin Tissoires), much improved battery reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng) - small assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits) HID: sensor: Update document for custom sensor HID: sensor: Custom and Generic sensor support HID: debug: fix error handling in hid_debug_events_read() Input - mt: Fix input_mt_get_slot_by_key HID: logitech-hidpp: fix error return code HID: wacom: Add support for Cintiq 13HD Touch HID: logitech-hidpp: add a module parameter to keep firmware gestures HID: usbhid: yet another mouse with ALWAYS_POLL HID: usbhid: more mice with ALWAYS_POLL HID: wacom: set stylus_in_proximity before checking touch_down HID: wacom: use wacom_wac_finger_count_touches to set touch_down HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT HID: pidff: effect can't be NULL HID: add quirk for PIXART OEM mouse used by HP HID: add HP OEM mouse to quirk ALWAYS_POLL HID: wacom: ask for a in-prox report when it was missed HID: hid-sensor-hub: Fix sparse warning HID: hid-sensor-hub: fix attribute read for logical usage id HID: plantronics: fix Kconfig default HID: pidff: support more than one concurrent effect ...
2015-04-13Merge tag 'staging-4.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big staging driver patchset for 4.1-rc1. There's a lot of patches here, the Outreachy application period happened during this development cycle, so that means that there was a lot of cleanup patches accepted. Other than the normal coding style and sparse fixes here, there are some driver updates and work toward making some of the drivers into "mergable" shape (like the Unisys drivers.) All of these have been in linux-next for a while" * tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1214 commits) staging: lustre: orthography & coding style staging: lustre: lnet: lnet: fix error return code staging: lustre: fix sparse warning Revert "Staging: sm750fb: Fix C99 Comments" Staging: rtl8192u: use correct array for debug output staging: rtl8192e: Remove dead code staging: rtl8192e: Comment cleanup (style/format) staging: rtl8192e: Fix indentation in rtllib_rx_auth_resp() staging: rtl8192e: Decrease nesting of rtllib_rx_auth_resp() staging: rtl8192e: Divide rtllib_rx_auth() staging: rtl8192e: Fix PRINTK_WITHOUT_KERN_LEVEL warnings staging: rtl8192e: Fix DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON warning staging: rtl8192e: Fix BRACES warning staging: rtl8192e: Fix LINE_CONTINUATIONS warning staging: rtl8192e: Fix UNNECESSARY_PARENTHESES warnings staging: rtl8192e: remove unused EXPORT_SYMBOL_RSL macro staging: rtl8192e: Fix RETURN_VOID warnings staging: rtl8192e: Fix UNNECESSARY_ELSE warning staging: rtl8723au: Remove unneeded comments staging: rtl8723au: Use __func__ in trace logs ...
2015-04-13Merge tag 'hsi-for-4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI changes from Sebastian Reichel: - nokia-modem: support speech data - misc fixes * tag 'hsi-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: cmt_speech: fix error return code HSI: nokia-modem: Add cmt-speech support HSI: cmt_speech: Add cmt-speech driver HSI: nokia-modem: fix error return code
2015-04-13Merge branches 'for-4.0/upstream-fixes', 'for-4.1/genius', ↵Jiri Kosina
'for-4.1/huion-uclogic-merge', 'for-4.1/i2c-hid', 'for-4.1/kconfig-drop-expert-dependency', 'for-4.1/logitech', 'for-4.1/multitouch', 'for-4.1/rmi', 'for-4.1/sony', 'for-4.1/upstream' and 'for-4.1/wacom' into for-linus
2015-04-13netfilter: nft_dynset: dynamic stateful expression instantiationPatrick McHardy
Support instantiating stateful expressions based on a template that are associated with dynamically created set entries. The expressions are evaluated when adding or updating the set element. This allows to maintain per flow state using the existing set infrastructure and expression types, with arbitrary definitions of a flow. Usage is currently restricted to anonymous sets, meaning only a single binding can exist, since the desired semantics of multiple independant bindings haven't been defined so far. Examples (userspace syntax is still WIP): 1. Limit the rate of new SSH connections per host, similar to iptables hashlimit: flow ip saddr timeout 60s \ limit 10/second \ accept 2. Account network traffic between each set of /24 networks: flow ip saddr & 255.255.255.0 . ip daddr & 255.255.255.0 \ counter 3. Account traffic to each host per user: flow skuid . ip daddr \ counter 4. Account traffic for each combination of source address and TCP flags: flow ip saddr . tcp flags \ counter The resulting set content after a Xmas-scan look like this: { 192.168.122.1 . fin | psh | urg : counter packets 1001 bytes 40040, 192.168.122.1 . ack : counter packets 74 bytes 3848, 192.168.122.1 . psh | ack : counter packets 35 bytes 3144 } Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-04-13netfilter: nf_tables: add flag to indicate set contains expressionsPatrick McHardy
Add a set flag to indicate that the set is used as a state table and contains expressions for evaluation. This operation is mutually exclusive with the mapping operation, so sets specifying both are rejected. The lookup expression also rejects binding to state tables since it only deals with loopup and map operations. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-04-13netfilter: nf_tables: prepare for expressions associated to set elementsPatrick McHardy
Preparation to attach expressions to set elements: add a set extension type to hold an expression and dump the expression information with the set element. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-04-13uapi: ebtables: don't include linux/if.hPablo Neira Ayuso
linux/if.h creates conflicts in userspace with net/if.h By using it here we force userspace to use linux/if.h while net/if.h may be needed. Note that: include/linux/netfilter_ipv4/ip_tables.h and include/linux/netfilter_ipv6/ip6_tables.h don't include linux/if.h and they also refer to IFNAMSIZ, so they are expecting userspace to include use net/if.h from the client program. Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-04-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "First batch of KVM changes for 4.1 The most interesting bit here is irqfd/ioeventfd support for ARM and ARM64. Summary: ARM/ARM64: fixes for live migration, irqfd and ioeventfd support (enabling vhost, too), page aging s390: interrupt handling rework, allowing to inject all local interrupts via new ioctl and to get/set the full local irq state for migration and introspection. New ioctls to access memory by virtual address, and to get/set the guest storage keys. SIMD support. MIPS: FPU and MIPS SIMD Architecture (MSA) support. Includes some patches from Ralf Baechle's MIPS tree. x86: bugfixes (notably for pvclock, the others are small) and cleanups. Another small latency improvement for the TSC deadline timer" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits) KVM: use slowpath for cross page cached accesses kvm: mmu: lazy collapse small sptes into large sptes KVM: x86: Clear CR2 on VCPU reset KVM: x86: DR0-DR3 are not clear on reset KVM: x86: BSP in MSR_IA32_APICBASE is writable KVM: x86: simplify kvm_apic_map KVM: x86: avoid logical_map when it is invalid KVM: x86: fix mixed APIC mode broadcast KVM: x86: use MDA for interrupt matching kvm/ppc/mpic: drop unused IRQ_testbit KVM: nVMX: remove unnecessary double caching of MAXPHYADDR KVM: nVMX: checks for address bits beyond MAXPHYADDR on VM-entry KVM: x86: cache maxphyaddr CPUID leaf in struct kvm_vcpu KVM: vmx: pass error code with internal error #2 x86: vdso: fix pvclock races with task migration KVM: remove kvm_read_hva and kvm_read_hva_atomic KVM: x86: optimize delivery of TSC deadline timer interrupt KVM: x86: extract blocking logic from __vcpu_run kvm: x86: fix x86 eflags fixed bit KVM: s390: migrate vcpu interrupt state ...
2015-04-13netfilter: nf_tables: variable sized set element keys / dataPatrick McHardy
This patch changes sets to support variable sized set element keys / data up to 64 bytes each by using variable sized set extensions. This allows to use concatenations with bigger data items suchs as IPv6 addresses. As a side effect, small keys/data now don't require the full 16 bytes of struct nft_data anymore but just the space they need. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-04-13netfilter: nf_tables: switch registers to 32 bit addressingPatrick McHardy
Switch the nf_tables registers from 128 bit addressing to 32 bit addressing to support so called concatenations, where multiple values can be concatenated over multiple registers for O(1) exact matches of multiple dimensions using sets. The old register values are mapped to areas of 128 bits for compatibility. When dumping register numbers, values are expressed using the old values if they refer to the beginning of a 128 bit area for compatibility. To support concatenations, register loads of less than a full 32 bit value need to be padded. This mainly affects the payload and exthdr expressions, which both unconditionally zero the last word before copying the data. Userspace fully passes the testsuite using both old and new register addressing. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-04-13Merge tag 'asoc-v4.1-2' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.1 More updates for v4.1, pretty much all drivers: - Lots of cleanups from Lars, mainly moving things from the CODEC level to the card level. - Continuing improvements to rcar from Morimoto-san, pcm512x from Howard and Peter, the Intel platforms from Vinod, Jie, Jin and Han, and to rt5670 from Bard. - Support for some non-DSP Qualcomm platforms, Google's Storm platform, Maxmim MAX98925 CODECs and the Ingenic JZ4780 SoC.
2015-04-12Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-04-11 This series contains updates to iflink, ixgbe and ixgbevf. The entire set of changes come from Vlad Zolotarov to ultimately add the ethtool ops to VF driver to allow querying the RSS indirection table and RSS random key. Currently we support only 82599 and x540 devices. On those devices, VFs share the RSS redirection table and hash key with a PF. Letting the VF query this information may introduce some security risks, therefore this feature will be disabled by default. The new netdev op allows a system administrator to change the default behaviour with "ip link set" command. The relevant iproute2 patch has already been sent and awaits for this series upstream. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-12fou: implement FOU_CMD_GETWANG Cong
Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-10if_link: Add an additional parameter to ifla_vf_info for RSS queryingVlad Zolotarov
Add configuration setting for drivers to allow/block an RSS Redirection Table and a Hash Key querying for discrete VFs. On some devices VF share the mentioned above information with PF and querying it may adduce a theoretical security risk. We want to let a system administrator to decide if he/she wants to take this risk or not. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextPablo Neira Ayuso
Resolve conflicts between 5888b93 ("Merge branch 'nf-hook-compress'") and Florian Westphal br_netfilter works. Conflicts: net/bridge/br_netfilter.c Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-04-08netfilter: nf_tables: support optional userdata for set elementsPatrick McHardy
Add an userdata set extension and allow the user to attach arbitrary data to set elements. This is intended to hold TLV encoded data like comments or DNS annotations that have no meaning to the kernel. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-04-08netfilter: nf_tables: add support for dynamic set updatesPatrick McHardy
Add a new "dynset" expression for dynamic set updates. A new set op ->update() is added which, for non existant elements, invokes an initialization callback and inserts the new element. For both new or existing elements the extenstion pointer is returned to the caller to optionally perform timer updates or other actions. Element removal is not supported so far, however that seems to be a rather exotic need and can be added later on. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-04-07netns: notify netns id eventsNicolas Dichtel
With this patch, netns ids that are created and deleted are advertised into the group RTNLGRP_NSID. Because callers of rtnl_net_notifyid() already know the id of the peer, there is no need to call __peernet2id() in rtnl_net_fill(). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07Merge tag 'kvm-s390-next-20150331' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD Features and fixes for 4.1 (kvm/next) 1. Assorted changes 1.1 allow more feature bits for the guest 1.2 Store breaking event address on program interrupts 2. Interrupt handling rework 2.1 Fix copy_to_user while holding a spinlock (cc stable) 2.2 Rework floating interrupts to follow the priorities 2.3 Allow to inject all local interrupts via new ioctl 2.4 allow to get/set the full local irq state, e.g. for migration and introspection
2015-04-07Merge tag 'v4.0-rc7' into nextDmitry Torokhov
Sync up with Linux 4.0-rc7 to bring in ALPS changes.
2015-04-07Merge 4.0-rc7 into staging-nextGreg Kroah-Hartman
We want those fixes (iio primarily) into the -next branch to help with merge and testing issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/mellanox/mlx4/cmd.c net/core/fib_rules.c net/ipv4/fib_frontend.c The fib_rules.c and fib_frontend.c conflicts were locking adjustments in 'net' overlapping addition and removal of code in 'net-next'. The mlx4 conflict was a bug fix in 'net' happening in the same place a constant was being replaced with a more suitable macro. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06tc: bpf: add checksum helpersAlexei Starovoitov
Commit 608cd71a9c7c ("tc: bpf: generalize pedit action") has added the possibility to mangle packet data to BPF programs in the tc pipeline. This patch adds two helpers bpf_l3_csum_replace() and bpf_l4_csum_replace() for fixing up the protocol checksums after the packet mangling. It also adds 'flags' argument to bpf_skb_store_bytes() helper to avoid unnecessary checksum recomputations when BPF programs adjusting l3/l4 checksums and documents all three helpers in uapi header. Moreover, a sample program is added to show how BPF programs can make use of the mangle and csum helpers. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "A fix for ALPS driver for issue introduced in the latest update and a tweak for yet another Lenovo box in Synaptics. There will be more ALPS tweaks coming.." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: define INPUT_PROP_ACCELEROMETER behavior Input: synaptics - fix min-max quirk value for E440 Input: synaptics - add quirk for Thinkpad E440 Input: ALPS - fix max coordinates for v5 and v7 protocols Input: add MT_TOOL_PALM
2015-04-03ebpf: add skb->priority to offset map for usage in {cls, act}_bpfDaniel Borkmann
This adds the ability to read out the skb->priority from an eBPF program, so that it can be taken into account from a tc filter or action for the use-case where the priority is not being used to directly override the filter classification in a qdisc, but to tag traffic otherwise for the classifier; the priority can be assigned from various places incl. user space, in future we may also mangle it from an eBPF program. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02perf: Add ITRACE_START record to indicate that tracing has startedAlexander Shishkin
For counters that generate AUX data that is bound to the context of a running task, such as instruction tracing, the decoder needs to know exactly which task is running when the event is first scheduled in, before the first sched_switch. The decoder's need to know this stems from the fact that instruction flow trace decoding will almost always require program's object code in order to reconstruct said flow and for that we need at least its pid/tid in the perf stream. To single out such instruction tracing pmus, this patch introduces ITRACE PMU capability. The reason this is not part of RECORD_AUX record is that not all pmus capable of generating AUX data need this, and the opposite is *probably* also true. While sched_switch covers for most cases, there are two problems with it: the consumer will need to process events out of order (that is, having found RECORD_AUX, it will have to skip forward to the nearest sched_switch to figure out which task it was, then go back to the actual trace to decode it) and it completely misses the case when the tracing is enabled and disabled before sched_switch, for example, via PERF_EVENT_IOC_DISABLE. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-15-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02perf: Add wakeup watermark control to the AUX areaAlexander Shishkin
When AUX area gets a certain amount of new data, we want to wake up userspace to collect it. This adds a new control to specify how much data will cause a wakeup. This is then passed down to pmu drivers via output handle's "wakeup" field, so that the driver can find the nearest point where it can generate an interrupt. We repurpose __reserved_2 in the event attribute for this, even though it was never checked to be zero before, aux_watermark will only matter for new AUX-aware code, so the old code should still be fine. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-10-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02perf: Support overwrite mode for the AUX areaAlexander Shishkin
This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02perf: Add AUX recordAlexander Shishkin
When there's new data in the AUX space, output a record indicating its offset and size and a set of flags, such as PERF_AUX_FLAG_TRUNCATED, to mean the described data was truncated to fit in the ring buffer. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-7-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02perf: Add AUX area to ring buffer for raw data streamsPeter Zijlstra
This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02perf: Add data_{offset,size} to user_pageAlexander Shishkin
Currently, the actual perf ring buffer is one page into the mmap area, following the user page and the userspace follows this convention. This patch adds data_{offset,size} fields to user_page that can be used by userspace instead for locating perf data in the mmap area. This is also helpful when mapping existing or shared buffers if their size is not known in advance. Right now, it is made to follow the existing convention that data_offset == PAGE_SIZE and data_offset + data_size == mmap_size. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-2-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02tracing: Allow BPF programs to call bpf_trace_printk()Alexei Starovoitov
Debugging of BPF programs needs some form of printk from the program, so let programs call limited trace_printk() with %d %u %x %p modifiers only. Similar to kernel modules, during program load verifier checks whether program is calling bpf_trace_printk() and if so, kernel allocates trace_printk buffers and emits big 'this is debug only' banner. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1427312966-8434-6-git-send-email-ast@plumgrid.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02tracing: Allow BPF programs to call bpf_ktime_get_ns()Alexei Starovoitov
bpf_ktime_get_ns() is used by programs to compute time delta between events or as a timestamp Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1427312966-8434-5-git-send-email-ast@plumgrid.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02tracing, perf: Implement BPF programs attached to kprobesAlexei Starovoitov
BPF programs, attached to kprobes, provide a safe way to execute user-defined BPF byte-code programs without being able to crash or hang the kernel in any way. The BPF engine makes sure that such programs have a finite execution time and that they cannot break out of their sandbox. The user interface is to attach to a kprobe via the perf syscall: struct perf_event_attr attr = { .type = PERF_TYPE_TRACEPOINT, .config = event_id, ... }; event_fd = perf_event_open(&attr,...); ioctl(event_fd, PERF_EVENT_IOC_SET_BPF, prog_fd); 'prog_fd' is a file descriptor associated with BPF program previously loaded. 'event_id' is an ID of the kprobe created. Closing 'event_fd': close(event_fd); ... automatically detaches BPF program from it. BPF programs can call in-kernel helper functions to: - lookup/update/delete elements in maps - probe_read - wraper of probe_kernel_read() used to access any kernel data structures BPF programs receive 'struct pt_regs *' as an input ('struct pt_regs' is architecture dependent) and return 0 to ignore the event and 1 to store kprobe event into the ring buffer. Note, kprobes are a fundamentally _not_ a stable kernel ABI, so BPF programs attached to kprobes must be recompiled for every kernel version and user must supply correct LINUX_VERSION_CODE in attr.kern_version during bpf_prog_load() call. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1427312966-8434-4-git-send-email-ast@plumgrid.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01Merge branch 'for-4.0' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd fixes from Bruce Fields: "Two main issues: - We found that turning on pNFS by default (when it's configured at build time) was too aggressive, so we want to switch the default before the 4.0 release. - Recent client changes to increase open parallelism uncovered a serious bug lurking in the server's open code. Also fix a krb5/selinux regression. The rest is mainly smaller pNFS fixes" * 'for-4.0' of git://linux-nfs.org/~bfields/linux: sunrpc: make debugfs file creation failure non-fatal nfsd: require an explicit option to enable pNFS NFSD: Fix bad update of layout in nfsd4_return_file_layout NFSD: Take care the return value from nfsd4_encode_stateid NFSD: Printk blocklayout length and offset as format 0x%llx nfsd: return correct lockowner when there is a race on hash insert nfsd: return correct openowner when there is a race to put one in the hash NFSD: Put exports after nfsd4_layout_verify fail NFSD: Error out when register_shrinker() fail NFSD: Take care the return value from nfsd4_decode_stateid NFSD: Check layout type when returning client layouts NFSD: restore trace event lost in mismerge
2015-04-01can: introduce new raw socket option to join the given CAN filtersOliver Hartkopp
The CAN_RAW socket can set multiple CAN identifier specific filters that lead to multiple filters in the af_can.c filter processing. These filters are indenpendent from each other which leads to logical OR'ed filters when applied. This socket option joines the given CAN filters in the way that only CAN frames are passed to user space that matched *all* given CAN filters. The semantic for the applied filters is therefore changed to a logical AND. This is useful especially when the filterset is a combination of filters where the CAN_INV_FILTER flag is set in order to notch single CAN IDs or CAN ID ranges from the incoming traffic. As the raw_rcv() function is executed from NET_RX softirq the introduced variables are implemented as per-CPU variables to avoid extensive locking at CAN frame reception time. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-04-01netfilter: nf_tables: add set element timeout supportPatrick McHardy
Add API support for set element timeouts. Elements can have a individual timeout value specified, overriding the sets' default. Two new extension types are used for timeouts - the timeout value and the expiration time. The timeout value only exists if it differs from the default value. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-04-01netfilter: nf_tables: add set timeout API supportPatrick McHardy
Add set timeout support to the netlink API. Sets with timeout support enabled can have a default timeout value and garbage collection interval specified. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-31Merge tag 'mac80211-next-for-davem-2015-03-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Lots of updates for net-next; along with the usual flurry of small fixes, cleanups and internal features we have: * VHT support for TDLS and IBSS (conditional on drivers though) * first TX performance improvements (the biggest will come later) * many suspend/resume (race) fixes * name_assign_type support from Tom Gundersen ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31HSI: cmt_speech: Add cmt-speech driverKai Vehmanen
Introduces the cmt-speech driver, which implements a character device interface for transferring speech data frames over HSI/SSI. The driver is used to exchange voice/speech data between the Nokia N900/N950/N9's modem and its cpu. Signed-off-by: Kai Vehmanen <kai.vehmanen@nokia.com> Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com> Signed-off-by: Joni Lapilainen <joni.lapilainen@gmail.com> Since the original driver has been written for 2.6.28 some build fixes and general cleanups have been added by me: * fix build for 4.0 kernel * replace GFP_ATOMIC with GFP_KERNEL in cs_alloc_cmds() * add sanity check for CS_SET_WAKELINE ioctl * cleanup driver initialisation * rename driver to cmt-speech to be consistent with ssi-protocol driver * move cs-protocol.h to include/uapi/linux/hsi, since it describes a userspace API * replace hardcoded channels numbers with values provided via the HSI framework (e.g. coming from DT) Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-31KVM: s390: migrate vcpu interrupt stateJens Freimann
This patch adds support to migrate vcpu interrupts. Two new vcpu ioctls are added which get/set the complete status of pending interrupts in one go. The ioctls are marked as available with the new capability KVM_CAP_S390_IRQ_STATE. We can not use a ONEREG, as the number of pending local interrupts is not constant and depends on the number of CPUs. To retrieve the interrupt state we add an ioctl KVM_S390_GET_IRQ_STATE. Its input parameter is a pointer to a struct kvm_s390_irq_state which has a buffer and length. For all currently pending interrupts, we copy a struct kvm_s390_irq into the buffer and pass it to userspace. To store interrupt state into a buffer provided by userspace, we add an ioctl KVM_S390_SET_IRQ_STATE. It passes a struct kvm_s390_irq_state into the kernel and injects all interrupts contained in the buffer. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-31KVM: s390: add ioctl to inject local interruptsJens Freimann
We have introduced struct kvm_s390_irq a while ago which allows to inject all kinds of interrupts as defined in the Principles of Operation. Add ioctl to inject interrupts with the extended struct kvm_s390_irq Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>