summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2021-06-18selftests: mptcp: enable checksum in mptcp_join.shGeliang Tang
This patch added a new argument "-C" for the mptcp_join.sh script to set the sysctl checksum_enabled to 1 in ns1 and ns2 to enable the data checksum. In chk_join_nr, check the counter of the mib for the data checksum. Also added a new argument "-S" for the mptcp_join.sh script to start the test cases that verify the checksum handshake: * Sender and listener both have checksums off * Sender and listener both have checksums on * Sender checksums off, listener checksums on * Sender checksums on, listener checksums off The output looks like this: 01 checksum test 0 0 sum[ ok ] - csum [ ok ] 02 checksum test 1 1 sum[ ok ] - csum [ ok ] 03 checksum test 0 1 sum[ ok ] - csum [ ok ] 04 checksum test 1 0 sum[ ok ] - csum [ ok ] 05 no JOIN syn[ ok ] - synack[ ok ] - ack[ ok ] sum[ ok ] - csum [ ok ] 06 single subflow, limited by client syn[ ok ] - synack[ ok ] - ack[ ok ] sum[ ok ] - csum [ ok ] Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18selftests: mptcp: enable checksum in mptcp_connect.shGeliang Tang
This patch added a new argument "-C" for the mptcp_connect.sh script to set the sysctl checksum_enabled to 1 in ns1, ns2, ns3 and ns4 to enable the data checksum. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18selftests: seg6: add selftest for SRv6 End.DT46 BehaviorAndrea Mayer
this selftest is designed for evaluating the new SRv6 End.DT46 Behavior used, in this example, for implementing IPv4/IPv6 L3 VPN use cases. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-06-17 The following pull-request contains BPF updates for your *net-next* tree. We've added 50 non-merge commits during the last 25 day(s) which contain a total of 148 files changed, 4779 insertions(+), 1248 deletions(-). The main changes are: 1) BPF infrastructure to migrate TCP child sockets from a listener to another in the same reuseport group/map, from Kuniyuki Iwashima. 2) Add a provably sound, faster and more precise algorithm for tnum_mul() as noted in https://arxiv.org/abs/2105.05398, from Harishankar Vishwanathan. 3) Streamline error reporting changes in libbpf as planned out in the 'libbpf: the road to v1.0' effort, from Andrii Nakryiko. 4) Add broadcast support to xdp_redirect_map(), from Hangbin Liu. 5) Extends bpf_map_lookup_and_delete_elem() functionality to 4 more map types, that is, {LRU_,PERCPU_,LRU_PERCPU_,}HASH, from Denis Salopek. 6) Support new LLVM relocations in libbpf to make them more linker friendly, also add a doc to describe the BPF backend relocations, from Yonghong Song. 7) Silence long standing KUBSAN complaints on register-based shifts in interpreter, from Daniel Borkmann and Eric Biggers. 8) Add dummy PT_REGS macros in libbpf to fail BPF program compilation when target arch cannot be determined, from Lorenz Bauer. 9) Extend AF_XDP to support large umems with 1M+ pages, from Magnus Karlsson. 10) Fix two minor libbpf tc BPF API issues, from Kumar Kartikeya Dwivedi. 11) Move libbpf BPF_SEQ_PRINTF/BPF_SNPRINTF macros that can be used by BPF programs to bpf_helpers.h header, from Florent Revest. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17selftests/bpf: Fix selftests build with old system-wide headersAndrii Nakryiko
migrate_reuseport.c selftest relies on having TCP_FASTOPEN_CONNECT defined in system-wide netinet/tcp.h. Selftests can use up-to-date uapi/linux/tcp.h, but that one doesn't have SOL_TCP. So instead of switching everything to uapi header, add #define for TCP_FASTOPEN_CONNECT to fix the build. Fixes: c9d0bdef89a6 ("bpf: Test BPF_SK_REUSEPORT_SELECT_OR_MIGRATE.") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Link: https://lore.kernel.org/bpf/20210617041446.425283-1-andrii@kernel.org
2021-06-16libbpf: Fail compilation if target arch is missingLorenz Bauer
bpf2go is the Go equivalent of libbpf skeleton. The convention is that the compiled BPF is checked into the repository to facilitate distributing BPF as part of Go packages. To make this portable, bpf2go by default generates both bpfel and bpfeb variants of the C. Using bpf_tracing.h is inherently non-portable since the fields of struct pt_regs differ between platforms, so CO-RE can't help us here. The only way of working around this is to compile for each target platform independently. bpf2go can't do this by default since there are too many platforms. Define the various PT_... macros when no target can be determined and turn them into compilation failures. This works because bpf2go always compiles for bpf targets, so the compiler fallback doesn't kick in. Conditionally define __BPF_MISSING_TARGET so that we can inject a more appropriate error message at build time. The user can then choose which platform to target explicitly. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210616083635.11434-1-lmb@cloudflare.com
2021-06-16selftests/bpf: Whitelist test_progs.h from .gitignoreDaniel Xu
Somehow test_progs.h was being included by the existing rule: /test_progs* This is bad because: 1) test_progs.h is a checked in file 2) grep-like tools like ripgrep[0] respect gitignore and test_progs.h was being hidden from searches [0]: https://github.com/BurntSushi/ripgrep Fixes: 74b5a5968fe8 ("selftests/bpf: Replace test_progs and test_maps w/ general rule") Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/a46f64944bf678bc652410ca6028d3450f4f7f4b.1623880296.git.dxu@dxuuu.xyz
2021-06-15bpf: Test BPF_SK_REUSEPORT_SELECT_OR_MIGRATE.Kuniyuki Iwashima
This patch adds a test for BPF_SK_REUSEPORT_SELECT_OR_MIGRATE and removes 'static' from settimeo() in network_helpers.c. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-12-kuniyu@amazon.co.jp
2021-06-15libbpf: Set expected_attach_type for BPF_PROG_TYPE_SK_REUSEPORT.Kuniyuki Iwashima
This commit introduces a new section (sk_reuseport/migrate) and sets expected_attach_type to two each section in BPF_PROG_TYPE_SK_REUSEPORT program. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-11-kuniyu@amazon.co.jp
2021-06-15bpf: Support socket migration by eBPF.Kuniyuki Iwashima
This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT to check if the attached eBPF program is capable of migrating sockets. When the eBPF program is attached, we run it for socket migration if the expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or net.ipv4.tcp_migrate_req is enabled. Currently, the expected_attach_type is not enforced for the BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the earlier idea in the commit aac3fc320d94 ("bpf: Post-hooks for sys_bind") to fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type(). Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to select a new listener based on the child socket. migrating_sk varies depending on if it is migrating a request in the accept queue or during 3WHS. - accept_queue : sock (ESTABLISHED/SYN_RECV) - 3WHS : request_sock (NEW_SYN_RECV) In the eBPF program, we can select a new listener by BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning SK_DROP. This feature is useful when listeners have different settings at the socket API level or when we want to free resources as soon as possible. - SK_PASS with selected_sk, select it as a new listener - SK_PASS with selected_sk NULL, fallbacks to the random selection - SK_DROP, cancel the migration. There is a noteworthy point. We select a listening socket in three places, but we do not have struct skb at closing a listener or retransmitting a SYN+ACK. On the other hand, some helper functions do not expect skb is NULL (e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer() in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb temporarily before running the eBPF program. Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/netdev/20201123003828.xjpjdtk4ygl6tg6h@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201203042402.6cskdlit5f3mw4ru@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/bpf/20210612123224.12525-10-kuniyu@amazon.co.jp
2021-06-15bpf: Support BPF_FUNC_get_socket_cookie() for BPF_PROG_TYPE_SK_REUSEPORT.Kuniyuki Iwashima
We will call sock_reuseport.prog for socket migration in the next commit, so the eBPF program has to know which listener is closing to select a new listener. We can currently get a unique ID of each listener in the userspace by calling bpf_map_lookup_elem() for BPF_MAP_TYPE_REUSEPORT_SOCKARRAY map. This patch makes the pointer of sk available in sk_reuseport_md so that we can get the ID by BPF_FUNC_get_socket_cookie() in the eBPF program. Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/netdev/20201119001154.kapwihc2plp4f7zc@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/bpf/20210612123224.12525-9-kuniyu@amazon.co.jp
2021-06-15libbpf: Set NLM_F_EXCL when creating qdiscKumar Kartikeya Dwivedi
This got lost during the refactoring across versions. We always use NLM_F_EXCL when creating some TC object, so reflect what the function says and set the flag. Fixes: 715c5ce454a6 ("libbpf: Add low level TC-BPF management API") Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210612023502.1283837-3-memxor@gmail.com
2021-06-15libbpf: Remove unneeded check for flags during tc detachKumar Kartikeya Dwivedi
Coverity complained about this being unreachable code. It is right because we already enforce flags to be unset, so a check validating the flag value is redundant. Fixes: 715c5ce454a6 ("libbpf: Add low level TC-BPF management API") Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210612023502.1283837-2-memxor@gmail.com
2021-06-14testing: selftests: drivers: net: netdevsim: devlink: add test case for hard ↵Oleksandr Mazur
drop statistics Add hard drop counter check testcase, to make sure netdevsim driver properly handles the devlink hard drop counters get/set callbacks. Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14testing: selftests: net: forwarding: add devlink-required functionality to ↵Oleksandr Mazur
test (hard) dropped stats field Add devlink_trap_drop_packets_get function, as well as test that are used to verify devlink (hard) dropped stats functionality works. Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14nexthops: Add selftests for cleanup of known bad route addDavid Ahern
Test cleanup path for routes usinig nexthop objects before the reference is taken on the nexthop. Specifically, bad metric for ipv4 and ipv6 and source routing for ipv6. Selftests that correspond to the recent bug fix: 821bbf79fe46 ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions") Signed-off-by: David Ahern <dsahern@kernel.org> Cc: Coco Li <lixiaoyan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11tools/bpftool: Fix error return code in do_batch()Zhihao Cheng
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 668da745af3c2 ("tools: bpftool: add support for quotations ...") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20210609115916.2186872-1-chengzhihao1@huawei.com
2021-06-11libbpf: Simplify the return expression of bpf_object__init_maps functionWang Hai
There is no need for special treatment of the 'ret == 0' case. This patch simplifies the return expression. Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210609115651.3392580-1-wanghai38@huawei.com
2021-06-11vsock_test: add SOCK_SEQPACKET testsArseny Krasnov
Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08selftests: devlink_lib: Fix bouncing of netdevsim DEVLINK_DEVPetr Machata
In the commit referenced below, a check was added to devlink_lib that asserts the existence of a devlink device referenced by $DEVLINK_DEV. Unfortunately, several netdevsim tests point DEVLINK_DEV at a device that does not exist at the time that devlink_lib is sourced. Thus these tests spuriously fail. Fix this by introducing an override. By setting DEVLINK_DEV to an empty string, the user declares their intention to handle DEVLINK_DEV management on their own. In all netdevsim tests that use devlink_lib and set DEVLINK_DEV, set instead an empty DEVLINK_DEV just before sourcing devlink_lib, and set it to the correct value right afterwards. Fixes: 557c4d2f780c ("selftests: devlink_lib: add check for devlink device existence") Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08selftests: Clean forgotten resources as part of cleanup()Amit Cohen
Several tests do not set some ports down as part of their cleanup(), resulting in IPv6 link-local addresses and associated routes not being deleted. These leaks were found using a BPF tool that monitors ASIC resources. Solve this by setting the ports down at the end of the tests. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08selftests: router_scale: Do not count failed routesAmit Cohen
To check how many routes are installed in hardware, the test runs "ip route" and greps for "offload", which includes routes with state "offload_failed". Till now, this wrong check was not found because after one failure in route insertion, the driver moved to "abort" mode, which means that user cannot try to add more routes. The previous patch removed the abort mechanism and now failed routes are counted as offloaded. Fix this by not considering routes with "offload_failed" flag as offloaded. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08selftests, bpf: Make docs tests fail more reliablyJoe Stringer
Previously, if rst2man caught errors, then these would be ignored and the output file would be written anyway. This would allow developers to introduce regressions in the docs comments in the BPF headers. Additionally, even if you instruct rst2man to fail out, it will still write out to the destination target file, so if you ran the tests twice in a row it would always pass. Use a temporary file for the initial run to ensure that if rst2man fails out under "--strict" mode, subsequent runs will not automatically pass. Tested via ./tools/testing/selftests/bpf/test_doc_build.sh Signed-off-by: Joe Stringer <joe@cilium.io> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20210608015756.340385-1-joe@cilium.io
2021-06-08libbpf: Fix pr_warn type warnings on 32bitMichal Suchanek
The printed value is ptrdiff_t and is formatted wiht %ld. This works on 64bit but produces a warning on 32bit. Fix the format specifier to %td. Fixes: 67234743736a ("libbpf: Generate loader program out of BPF ELF file.") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210604112448.32297-1-msuchanek@suse.de
2021-06-08tools/bpftool: Fix cross-buildJean-Philippe Brucker
When the bootstrap and final bpftool have different architectures, we need to build two distinct disasm.o objects. Add a recipe for the bootstrap disasm.o. After commit d510296d331a ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.") cross-building bpftool didn't work anymore, because the bootstrap bpftool was linked using objects from different architectures: $ make O=/tmp/bpftool ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -C tools/bpf/bpftool/ V=1 [...] aarch64-linux-gnu-gcc ... -c -MMD -o /tmp/bpftool/disasm.o /home/z/src/linux/kernel/bpf/disasm.c gcc ... -c -MMD -o /tmp/bpftool//bootstrap/main.o main.c gcc ... -o /tmp/bpftool//bootstrap/bpftool /tmp/bpftool//bootstrap/main.o ... /tmp/bpftool/disasm.o /usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183) /usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183) /usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183) /usr/bin/ld: /tmp/bpftool/disasm.o: error adding symbols: file in wrong format collect2: error: ld returned 1 exit status [...] The final bpftool was built for e.g. arm64, while the bootstrap bpftool, executed on the host, was built for x86. The problem here was that disasm.o linked into the bootstrap bpftool was arm64 rather than x86. With the fix we build two disasm.o, one for the target bpftool in arm64, and one for the bootstrap bpftool in x86. Fixes: d510296d331a ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210603170515.1854642-1-jean-philippe@linaro.org
2021-06-07Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Bug fixes overlapping feature additions and refactoring, mostly. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-04wireguard: selftests: make sure rp_filter is disabled on vethcJason A. Donenfeld
Some distros may enable strict rp_filter by default, which will prevent vethc from receiving the packets with an unrouteable reverse path address. Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-04wireguard: selftests: remove old conntrack kconfig valueJason A. Donenfeld
On recent kernels, this config symbol is no longer used. Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-04selftests: mptcp_connect: add SO_TIMESTAMPNS cmsg supportFlorian Westphal
This extends the existing setsockopt test case to also check for cmsg timestamps. mptcp_connect will abort/fail if the setockopt was passed but the timestamp cmsg isn't present after successful recvmsg(). Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03selftests/bpf: Add xdp_redirect_multi into .gitignoreAndrii Nakryiko
When xdp_redirect_multi test binary was added recently, it wasn't added to .gitignore. Fix that. Fixes: d23292476297 ("selftests/bpf: Add xdp_redirect_multi test") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210603004026.2698513-5-andrii@kernel.org
2021-06-03libbpf: Install skel_internal.h header used from light skeletonsAndrii Nakryiko
Light skeleton code assumes skel_internal.h header to be installed system-wide by libbpf package. Make sure it is actually installed. Fixes: 67234743736a ("libbpf: Generate loader program out of BPF ELF file.") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210603004026.2698513-4-andrii@kernel.org
2021-06-03libbpf: Refactor header installation portions of MakefileAndrii Nakryiko
As we gradually get more headers that have to be installed, it's quite annoying to copy/paste long $(call) commands. So extract that logic and do a simple $(foreach) over the list of headers. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210603004026.2698513-3-andrii@kernel.org
2021-06-03libbpf: Move few APIs from 0.4 to 0.5 versionAndrii Nakryiko
Official libbpf 0.4 release doesn't include three APIs that were tentatively put into 0.4 section. Fix libbpf.map and move these three APIs: - bpf_map__initial_value; - bpf_map_lookup_and_delete_elem_flags; - bpf_object__gen_loader. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210603004026.2698513-2-andrii@kernel.org
2021-06-02selftest: netdevsim: Add devlink rate grouping testDmytro Linkin
Test verifies that netdevsim correctly implements devlink ops callbacks that set node as a parent of devlink leaf or node rate object. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02selftest: netdevsim: Add devlink rate nodes testDmytro Linkin
Test verifies that it is possible to create, delete and set min/max tx rate of devlink rate node on netdevsim VF. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02selftest: netdevsim: Add devlink port shared/max tx rate testDmytro Linkin
Test verifies that netdevsim VFs can set and retrieve shared/max tx rate through new devlink API. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02selftest: netdevsim: Add devlink rate testDmytro Linkin
Test verifies that all netdevsim VF ports have rate leaf object created by default. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01net/sched: act_vlan: Test priority 0 modificationBoris Sukholitko
Because explicitly being set, the priority 0 should appear in the output. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01net/sched: act_vlan: No dump for unset priorityBoris Sukholitko
Dump vlan priority only if it has been previously set. Fix the tests accordingly. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-28mptcp: update selftest for fallback due to OoOPaolo Abeni
The previous commit noted that we can have fallback scenario due to OoO (or packet drop). Update the self-tests accordingly Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-28bpf, docs: Add llvm_reloc.rst to explain llvm bpf relocationsYonghong Song
LLVM upstream commit https://reviews.llvm.org/D102712 made some changes to bpf relocations to make them llvm linker lld friendly. The scope of existing relocations R_BPF_64_{64,32} is narrowed and new relocations R_BPF_64_{ABS32,ABS64,NODYLD32} are introduced. Let us add some documentation about llvm bpf relocations so people can understand how to resolve them properly in their respective tools. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210526152457.335210-1-yhs@fb.com
2021-05-27selftests: devlink_lib: add check for devlink device existenceJiri Pirko
If user passes devlink handle over DEVLINK_DEV variable, check if the device exists. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20210527105515.790330-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-26Merge tag 'net-5.13-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc4, including fixes from bpf, netfilter, can and wireless trees. Notably including fixes for the recently announced "FragAttacks" WiFi vulnerabilities. Rather large batch, touching some core parts of the stack, too, but nothing hair-raising. Current release - regressions: - tipc: make node link identity publish thread safe - dsa: felix: re-enable TAS guard band mode - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid() - stmmac: fix system hang if change mac address after interface ifdown Current release - new code bugs: - mptcp: avoid OOB access in setsockopt() - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers - ethtool: stats: fix a copy-paste error - init correct array size Previous releases - regressions: - sched: fix packet stuck problem for lockless qdisc - net: really orphan skbs tied to closing sk - mlx4: fix EEPROM dump support - bpf: fix alu32 const subreg bound tracking on bitwise operations - bpf: fix mask direction swap upon off reg sign change - bpf, offload: reorder offload callback 'prepare' in verifier - stmmac: Fix MAC WoL not working if PHY does not support WoL - packetmmap: fix only tx timestamp on request - tipc: skb_linearize the head skb when reassembling msgs Previous releases - always broken: - mac80211: address recent "FragAttacks" vulnerabilities - mac80211: do not accept/forward invalid EAPOL frames - mptcp: avoid potential error message floods - bpf, ringbuf: deny reserve of buffers larger than ringbuf to prevent out of buffer writes - bpf: forbid trampoline attach for functions with variable arguments - bpf: add deny list of functions to prevent inf recursion of tracing programs - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT - can: isotp: prevent race between isotp_bind() and isotp_setsockopt() - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Misc: - bpf: add kconfig knob for disabling unpriv bpf by default" * tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits) net: phy: Document phydev::dev_flags bits allocation mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer mptcp: avoid error message on infinite mapping mptcp: drop unconditional pr_warn on bad opt mptcp: avoid OOB access in setsockopt() nfp: update maintainer and mailing list addresses net: mvpp2: add buffer header handling in RX bnx2x: Fix missing error code in bnx2x_iov_init_one() net: zero-initialize tc skb extension on allocation net: hns: Fix kernel-doc sctp: fix the proc_handler for sysctl encap_port sctp: add the missing setting for asoc encap_port bpf, selftests: Adjust few selftest result_unpriv outcomes bpf: No need to simulate speculative domain for immediates bpf: Fix mask direction swap upon off reg sign change bpf: Wrap aux data inside bpf_sanitize_info container bpf: Fix BPF_LSM kconfig symbol dependency selftests/bpf: Add test for l3 use of bpf_redirect_peer bpftool: Add sock_release help info for cgroup attach/prog load command net: dsa: microchip: enable phy errata workaround on 9567 ...
2021-05-26libbpf: Move BPF_SEQ_PRINTF and BPF_SNPRINTF to bpf_helpers.hFlorent Revest
These macros are convenient wrappers around the bpf_seq_printf and bpf_snprintf helpers. They are currently provided by bpf_tracing.h which targets low level tracing primitives. bpf_helpers.h is a better fit. The __bpf_narg and __bpf_apply are needed in both files and provided twice. __bpf_empty isn't used anywhere and is removed from bpf_tracing.h Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210526164643.2881368-1-revest@chromium.org
2021-05-26selftests/bpf: Add xdp_redirect_multi testHangbin Liu
Add a bpf selftest for new helper xdp_redirect_map_multi(). In this test there are 3 forward groups and 1 exclude group. The test will redirect each interface's packets to all the interfaces in the forward group, and exclude the interface in exclude map. Two maps (DEVMAP, DEVMAP_HASH) and two xdp modes (generic, drive) will be tested. XDP egress program will also be tested by setting pkt src MAC to egress interface's MAC address. For more test details, you can find it in the test script. Here is the test result. ]# time ./test_xdp_redirect_multi.sh Pass: xdpgeneric arp(F_BROADCAST) ns1-1 Pass: xdpgeneric arp(F_BROADCAST) ns1-2 Pass: xdpgeneric arp(F_BROADCAST) ns1-3 Pass: xdpgeneric IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-1 Pass: xdpgeneric IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-2 Pass: xdpgeneric IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-3 Pass: xdpgeneric IPv6 (no flags) ns1-1 Pass: xdpgeneric IPv6 (no flags) ns1-2 Pass: xdpdrv arp(F_BROADCAST) ns1-1 Pass: xdpdrv arp(F_BROADCAST) ns1-2 Pass: xdpdrv arp(F_BROADCAST) ns1-3 Pass: xdpdrv IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-1 Pass: xdpdrv IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-2 Pass: xdpdrv IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-3 Pass: xdpdrv IPv6 (no flags) ns1-1 Pass: xdpdrv IPv6 (no flags) ns1-2 Pass: xdpegress mac ns1-2 Pass: xdpegress mac ns1-3 Summary: PASS 18, FAIL 0 real 1m18.321s user 0m0.123s sys 0m0.350s Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20210519090747.1655268-5-liuhangbin@gmail.com
2021-05-26xdp: Extend xdp_redirect_map with broadcast supportHangbin Liu
This patch adds two flags BPF_F_BROADCAST and BPF_F_EXCLUDE_INGRESS to extend xdp_redirect_map for broadcast support. With BPF_F_BROADCAST the packet will be broadcasted to all the interfaces in the map. with BPF_F_EXCLUDE_INGRESS the ingress interface will be excluded when do broadcasting. When getting the devices in dev hash map via dev_map_hash_get_next_key(), there is a possibility that we fall back to the first key when a device was removed. This will duplicate packets on some interfaces. So just walk the whole buckets to avoid this issue. For dev array map, we also walk the whole map to find valid interfaces. Function bpf_clear_redirect_map() was removed in commit ee75aef23afe ("bpf, xdp: Restructure redirect actions"). Add it back as we need to use ri->map again. With test topology: +-------------------+ +-------------------+ | Host A (i40e 10G) | ---------- | eno1(i40e 10G) | +-------------------+ | | | Host B | +-------------------+ | | | Host C (i40e 10G) | ---------- | eno2(i40e 10G) | +-------------------+ | | | +------+ | | veth0 -- | Peer | | | veth1 -- | | | | veth2 -- | NS | | | +------+ | +-------------------+ On Host A: # pktgen/pktgen_sample03_burst_single_flow.sh -i eno1 -d $dst_ip -m $dst_mac -s 64 On Host B(Intel(R) Xeon(R) CPU E5-2690 v3 @ 2.60GHz, 128G Memory): Use xdp_redirect_map and xdp_redirect_map_multi in samples/bpf for testing. All the veth peers in the NS have a XDP_DROP program loaded. The forward_map max_entries in xdp_redirect_map_multi is modify to 4. Testing the performance impact on the regular xdp_redirect path with and without patch (to check impact of additional check for broadcast mode): 5.12 rc4 | redirect_map i40e->i40e | 2.0M | 9.7M 5.12 rc4 | redirect_map i40e->veth | 1.7M | 11.8M 5.12 rc4 + patch | redirect_map i40e->i40e | 2.0M | 9.6M 5.12 rc4 + patch | redirect_map i40e->veth | 1.7M | 11.7M Testing the performance when cloning packets with the redirect_map_multi test, using a redirect map size of 4, filled with 1-3 devices: 5.12 rc4 + patch | redirect_map multi i40e->veth (x1) | 1.7M | 11.4M 5.12 rc4 + patch | redirect_map multi i40e->veth (x2) | 1.1M | 4.3M 5.12 rc4 + patch | redirect_map multi i40e->veth (x3) | 0.8M | 2.6M Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/20210519090747.1655268-3-liuhangbin@gmail.com
2021-05-25bpftool: Set errno on skeleton failures and propagate errorsAndrii Nakryiko
Follow libbpf's error handling conventions and pass through errors and errno properly. Skeleton code always returned NULL on errors (not ERR_PTR(err)), so there are no backwards compatibility concerns. But now we also set errno properly, so it's possible to distinguish different reasons for failure, if necessary. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20210525035935.1461796-6-andrii@kernel.org
2021-05-25libbpf: Streamline error reporting for high-level APIsAndrii Nakryiko
Implement changes to error reporting for high-level libbpf APIs to make them less surprising and less error-prone to users: - in all the cases when error happens, errno is set to an appropriate error value; - in libbpf 1.0 mode, all pointer-returning APIs return NULL on error and error code is communicated through errno; this applies both to APIs that already returned NULL before (so now they communicate more detailed error codes), as well as for many APIs that used ERR_PTR() macro and encoded error numbers as fake pointers. - in legacy (default) mode, those APIs that were returning ERR_PTR(err), continue doing so, but still set errno. With these changes, errno can be always used to extract actual error, regardless of legacy or libbpf 1.0 modes. This is utilized internally in libbpf in places where libbpf uses it's own high-level APIs. libbpf_get_error() is adapted to handle both cases completely transparently to end-users (and is used by libbpf consistently as well). More context, justification, and discussion can be found in "Libbpf: the road to v1.0" document ([0]). [0] https://docs.google.com/document/d/1UyjTZuPFWiPFyKk1tV5an11_iaRuec6U-ZESZ54nNTY Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20210525035935.1461796-5-andrii@kernel.org
2021-05-25libbpf: Streamline error reporting for low-level APIsAndrii Nakryiko
Ensure that low-level APIs behave uniformly across the libbpf as follows: - in case of an error, errno is always set to the correct error code; - when libbpf 1.0 mode is enabled with LIBBPF_STRICT_DIRECT_ERRS option to libbpf_set_strict_mode(), return -Exxx error value directly, instead of -1; - by default, until libbpf 1.0 is released, keep returning -1 directly. More context, justification, and discussion can be found in "Libbpf: the road to v1.0" document ([0]). [0] https://docs.google.com/document/d/1UyjTZuPFWiPFyKk1tV5an11_iaRuec6U-ZESZ54nNTY Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20210525035935.1461796-4-andrii@kernel.org
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-24 23:30:22 +0000