From 7d7b28b302085e1ec2815bc9f5205af28394c5db Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Wed, 18 May 2022 09:40:15 +0200 Subject: powerpc/irq: Split irq.c More than half of irq.c is dedicated to PPC64. Move PPC64 code out of irq.c into irq_64.c Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/9f1a47de80f78d3dd270a7a72f69f55f581c4054.1652859593.git.christophe.leroy@csgroup.eu --- arch/powerpc/kernel/irq.c | 421 ---------------------------------------------- 1 file changed, 421 deletions(-) (limited to 'arch/powerpc/kernel/irq.c') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 4db27198b002..4abfe6bd6622 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -67,12 +67,6 @@ #include #include -#ifdef CONFIG_PPC64 -#include -#include -#include -#include -#endif #define CREATE_TRACE_POINTS #include #include @@ -89,411 +83,6 @@ u32 tau_interrupts(unsigned long cpu); #endif #endif /* CONFIG_PPC32 */ -#ifdef CONFIG_PPC64 - -int distribute_irqs = 1; - -static inline notrace unsigned long get_irq_happened(void) -{ - unsigned long happened; - - __asm__ __volatile__("lbz %0,%1(13)" - : "=r" (happened) : "i" (offsetof(struct paca_struct, irq_happened))); - - return happened; -} - -void replay_soft_interrupts(void) -{ - struct pt_regs regs; - - /* - * Be careful here, calling these interrupt handlers can cause - * softirqs to be raised, which they may run when calling irq_exit, - * which will cause local_irq_enable() to be run, which can then - * recurse into this function. Don't keep any state across - * interrupt handler calls which may change underneath us. - * - * We use local_paca rather than get_paca() to avoid all the - * debug_smp_processor_id() business in this low level function. - */ - - ppc_save_regs(®s); - regs.softe = IRQS_ENABLED; - regs.msr |= MSR_EE; - -again: - if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) - WARN_ON_ONCE(mfmsr() & MSR_EE); - - /* - * Force the delivery of pending soft-disabled interrupts on PS3. - * Any HV call will have this side effect. - */ - if (firmware_has_feature(FW_FEATURE_PS3_LV1)) { - u64 tmp, tmp2; - lv1_get_version_info(&tmp, &tmp2); - } - - /* - * Check if an hypervisor Maintenance interrupt happened. - * This is a higher priority interrupt than the others, so - * replay it first. - */ - if (IS_ENABLED(CONFIG_PPC_BOOK3S) && (local_paca->irq_happened & PACA_IRQ_HMI)) { - local_paca->irq_happened &= ~PACA_IRQ_HMI; - regs.trap = INTERRUPT_HMI; - handle_hmi_exception(®s); - if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS)) - hard_irq_disable(); - } - - if (local_paca->irq_happened & PACA_IRQ_DEC) { - local_paca->irq_happened &= ~PACA_IRQ_DEC; - regs.trap = INTERRUPT_DECREMENTER; - timer_interrupt(®s); - if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS)) - hard_irq_disable(); - } - - if (local_paca->irq_happened & PACA_IRQ_EE) { - local_paca->irq_happened &= ~PACA_IRQ_EE; - regs.trap = INTERRUPT_EXTERNAL; - do_IRQ(®s); - if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS)) - hard_irq_disable(); - } - - if (IS_ENABLED(CONFIG_PPC_DOORBELL) && (local_paca->irq_happened & PACA_IRQ_DBELL)) { - local_paca->irq_happened &= ~PACA_IRQ_DBELL; - regs.trap = INTERRUPT_DOORBELL; - doorbell_exception(®s); - if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS)) - hard_irq_disable(); - } - - /* Book3E does not support soft-masking PMI interrupts */ - if (IS_ENABLED(CONFIG_PPC_BOOK3S) && (local_paca->irq_happened & PACA_IRQ_PMI)) { - local_paca->irq_happened &= ~PACA_IRQ_PMI; - regs.trap = INTERRUPT_PERFMON; - performance_monitor_exception(®s); - if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS)) - hard_irq_disable(); - } - - if (local_paca->irq_happened & ~PACA_IRQ_HARD_DIS) { - /* - * We are responding to the next interrupt, so interrupt-off - * latencies should be reset here. - */ - trace_hardirqs_on(); - trace_hardirqs_off(); - goto again; - } -} - -#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_KUAP) -static inline void replay_soft_interrupts_irqrestore(void) -{ - unsigned long kuap_state = get_kuap(); - - /* - * Check if anything calls local_irq_enable/restore() when KUAP is - * disabled (user access enabled). We handle that case here by saving - * and re-locking AMR but we shouldn't get here in the first place, - * hence the warning. - */ - kuap_assert_locked(); - - if (kuap_state != AMR_KUAP_BLOCKED) - set_kuap(AMR_KUAP_BLOCKED); - - replay_soft_interrupts(); - - if (kuap_state != AMR_KUAP_BLOCKED) - set_kuap(kuap_state); -} -#else -#define replay_soft_interrupts_irqrestore() replay_soft_interrupts() -#endif - -notrace void arch_local_irq_restore(unsigned long mask) -{ - unsigned char irq_happened; - - /* Write the new soft-enabled value if it is a disable */ - if (mask) { - irq_soft_mask_set(mask); - return; - } - - if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) - WARN_ON_ONCE(in_nmi() || in_hardirq()); - - /* - * After the stb, interrupts are unmasked and there are no interrupts - * pending replay. The restart sequence makes this atomic with - * respect to soft-masked interrupts. If this was just a simple code - * sequence, a soft-masked interrupt could become pending right after - * the comparison and before the stb. - * - * This allows interrupts to be unmasked without hard disabling, and - * also without new hard interrupts coming in ahead of pending ones. - */ - asm_volatile_goto( -"1: \n" -" lbz 9,%0(13) \n" -" cmpwi 9,0 \n" -" bne %l[happened] \n" -" stb 9,%1(13) \n" -"2: \n" - RESTART_TABLE(1b, 2b, 1b) - : : "i" (offsetof(struct paca_struct, irq_happened)), - "i" (offsetof(struct paca_struct, irq_soft_mask)) - : "cr0", "r9" - : happened); - - if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) - WARN_ON_ONCE(!(mfmsr() & MSR_EE)); - - return; - -happened: - irq_happened = get_irq_happened(); - if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) - WARN_ON_ONCE(!irq_happened); - - if (irq_happened == PACA_IRQ_HARD_DIS) { - if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) - WARN_ON_ONCE(mfmsr() & MSR_EE); - irq_soft_mask_set(IRQS_ENABLED); - local_paca->irq_happened = 0; - __hard_irq_enable(); - return; - } - - /* Have interrupts to replay, need to hard disable first */ - if (!(irq_happened & PACA_IRQ_HARD_DIS)) { - if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) { - if (!(mfmsr() & MSR_EE)) { - /* - * An interrupt could have come in and cleared - * MSR[EE] and set IRQ_HARD_DIS, so check - * IRQ_HARD_DIS again and warn if it is still - * clear. - */ - irq_happened = get_irq_happened(); - WARN_ON_ONCE(!(irq_happened & PACA_IRQ_HARD_DIS)); - } - } - __hard_irq_disable(); - local_paca->irq_happened |= PACA_IRQ_HARD_DIS; - } else { - if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) { - if (WARN_ON_ONCE(mfmsr() & MSR_EE)) - __hard_irq_disable(); - } - } - - /* - * Disable preempt here, so that the below preempt_enable will - * perform resched if required (a replayed interrupt may set - * need_resched). - */ - preempt_disable(); - irq_soft_mask_set(IRQS_ALL_DISABLED); - trace_hardirqs_off(); - - replay_soft_interrupts_irqrestore(); - local_paca->irq_happened = 0; - - trace_hardirqs_on(); - irq_soft_mask_set(IRQS_ENABLED); - __hard_irq_enable(); - preempt_enable(); -} -EXPORT_SYMBOL(arch_local_irq_restore); - -/* - * This is a helper to use when about to go into idle low-power - * when the latter has the side effect of re-enabling interrupts - * (such as calling H_CEDE under pHyp). - * - * You call this function with interrupts soft-disabled (this is - * already the case when ppc_md.power_save is called). The function - * will return whether to enter power save or just return. - * - * In the former case, it will have notified lockdep of interrupts - * being re-enabled and generally sanitized the lazy irq state, - * and in the latter case it will leave with interrupts hard - * disabled and marked as such, so the local_irq_enable() call - * in arch_cpu_idle() will properly re-enable everything. - */ -bool prep_irq_for_idle(void) -{ - /* - * First we need to hard disable to ensure no interrupt - * occurs before we effectively enter the low power state - */ - __hard_irq_disable(); - local_paca->irq_happened |= PACA_IRQ_HARD_DIS; - - /* - * If anything happened while we were soft-disabled, - * we return now and do not enter the low power state. - */ - if (lazy_irq_pending()) - return false; - - /* Tell lockdep we are about to re-enable */ - trace_hardirqs_on(); - - /* - * Mark interrupts as soft-enabled and clear the - * PACA_IRQ_HARD_DIS from the pending mask since we - * are about to hard enable as well as a side effect - * of entering the low power state. - */ - local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS; - irq_soft_mask_set(IRQS_ENABLED); - - /* Tell the caller to enter the low power state */ - return true; -} - -#ifdef CONFIG_PPC_BOOK3S -/* - * This is for idle sequences that return with IRQs off, but the - * idle state itself wakes on interrupt. Tell the irq tracer that - * IRQs are enabled for the duration of idle so it does not get long - * off times. Must be paired with fini_irq_for_idle_irqsoff. - */ -bool prep_irq_for_idle_irqsoff(void) -{ - WARN_ON(!irqs_disabled()); - - /* - * First we need to hard disable to ensure no interrupt - * occurs before we effectively enter the low power state - */ - __hard_irq_disable(); - local_paca->irq_happened |= PACA_IRQ_HARD_DIS; - - /* - * If anything happened while we were soft-disabled, - * we return now and do not enter the low power state. - */ - if (lazy_irq_pending()) - return false; - - /* Tell lockdep we are about to re-enable */ - trace_hardirqs_on(); - - return true; -} - -/* - * Take the SRR1 wakeup reason, index into this table to find the - * appropriate irq_happened bit. - * - * Sytem reset exceptions taken in idle state also come through here, - * but they are NMI interrupts so do not need to wait for IRQs to be - * restored, and should be taken as early as practical. These are marked - * with 0xff in the table. The Power ISA specifies 0100b as the system - * reset interrupt reason. - */ -#define IRQ_SYSTEM_RESET 0xff - -static const u8 srr1_to_lazyirq[0x10] = { - 0, 0, 0, - PACA_IRQ_DBELL, - IRQ_SYSTEM_RESET, - PACA_IRQ_DBELL, - PACA_IRQ_DEC, - 0, - PACA_IRQ_EE, - PACA_IRQ_EE, - PACA_IRQ_HMI, - 0, 0, 0, 0, 0 }; - -void replay_system_reset(void) -{ - struct pt_regs regs; - - ppc_save_regs(®s); - regs.trap = 0x100; - get_paca()->in_nmi = 1; - system_reset_exception(®s); - get_paca()->in_nmi = 0; -} -EXPORT_SYMBOL_GPL(replay_system_reset); - -void irq_set_pending_from_srr1(unsigned long srr1) -{ - unsigned int idx = (srr1 & SRR1_WAKEMASK_P8) >> 18; - u8 reason = srr1_to_lazyirq[idx]; - - /* - * Take the system reset now, which is immediately after registers - * are restored from idle. It's an NMI, so interrupts need not be - * re-enabled before it is taken. - */ - if (unlikely(reason == IRQ_SYSTEM_RESET)) { - replay_system_reset(); - return; - } - - if (reason == PACA_IRQ_DBELL) { - /* - * When doorbell triggers a system reset wakeup, the message - * is not cleared, so if the doorbell interrupt is replayed - * and the IPI handled, the doorbell interrupt would still - * fire when EE is enabled. - * - * To avoid taking the superfluous doorbell interrupt, - * execute a msgclr here before the interrupt is replayed. - */ - ppc_msgclr(PPC_DBELL_MSGTYPE); - } - - /* - * The 0 index (SRR1[42:45]=b0000) must always evaluate to 0, - * so this can be called unconditionally with the SRR1 wake - * reason as returned by the idle code, which uses 0 to mean no - * interrupt. - * - * If a future CPU was to designate this as an interrupt reason, - * then a new index for no interrupt must be assigned. - */ - local_paca->irq_happened |= reason; -} -#endif /* CONFIG_PPC_BOOK3S */ - -/* - * Force a replay of the external interrupt handler on this CPU. - */ -void force_external_irq_replay(void) -{ - /* - * This must only be called with interrupts soft-disabled, - * the replay will happen when re-enabling. - */ - WARN_ON(!arch_irqs_disabled()); - - /* - * Interrupts must always be hard disabled before irq_happened is - * modified (to prevent lost update in case of interrupt between - * load and store). - */ - __hard_irq_disable(); - local_paca->irq_happened |= PACA_IRQ_HARD_DIS; - - /* Indicate in the PACA that we have an interrupt to replay */ - local_paca->irq_happened |= PACA_IRQ_EE; -} - -#endif /* CONFIG_PPC64 */ - int arch_show_interrupts(struct seq_file *p, int prec) { int j; @@ -795,13 +384,3 @@ int irq_choose_cpu(const struct cpumask *mask) return hard_smp_processor_id(); } #endif - -#ifdef CONFIG_PPC64 -static int __init setup_noirqdistrib(char *str) -{ - distribute_irqs = 0; - return 1; -} - -__setup("noirqdistrib", setup_noirqdistrib); -#endif /* CONFIG_PPC64 */ -- cgit v1.2.3-70-g09d2