From f03b24a851d32ca85dacab01785b24a7ee717d37 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 4 Apr 2016 11:47:50 +0200 Subject: ALSA: usb-audio: Add a sample rate quirk for Phoenix Audio TMX320 Phoenix Audio TMX320 gives the similar error when the sample rate is asked: usb 2-1.3: 2:1: cannot get freq at ep 0x85 usb 2-1.3: 1:1: cannot get freq at ep 0x2 .... Add the corresponding USB-device ID (1de7:0014) to snd_usb_get_sample_rate_quirk() list. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110221 Cc: Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+) (limited to 'sound/usb') diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 6178bb5d0731..24c7c2311b47 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1137,6 +1137,7 @@ bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) case USB_ID(0x047F, 0xAA05): /* Plantronics DA45 */ case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */ case USB_ID(0x074D, 0x3553): /* Outlaw RR2150 (Micronas UAC3553B) */ + case USB_ID(0x1de7, 0x0014): /* Phoenix Audio TMX320 */ case USB_ID(0x21B4, 0x0081): /* AudioQuest DragonFly */ return true; } -- cgit v1.2.3-70-g09d2 From b4203ff5464da00b7812e7b480192745b0d66bbf Mon Sep 17 00:00:00 2001 From: Dennis Kadioglu Date: Wed, 6 Apr 2016 08:39:01 +0200 Subject: ALSA: usb-audio: Add a quirk for Plantronics BT300 Plantronics BT300 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x1". This patch adds the USB ID of the BT300 to quirks.c and avoids those error messages. Signed-off-by: Dennis Kadioglu Cc: Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+) (limited to 'sound/usb') diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 24c7c2311b47..0adfd9537cf7 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1134,6 +1134,7 @@ bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) case USB_ID(0x045E, 0x076F): /* MS Lifecam HD-6000 */ case USB_ID(0x045E, 0x0772): /* MS Lifecam Studio */ case USB_ID(0x045E, 0x0779): /* MS Lifecam HD-3000 */ + case USB_ID(0x047F, 0x0415): /* Plantronics BT-300 */ case USB_ID(0x047F, 0xAA05): /* Plantronics DA45 */ case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */ case USB_ID(0x074D, 0x3553): /* Outlaw RR2150 (Micronas UAC3553B) */ -- cgit v1.2.3-70-g09d2 From adcdd0d5a1cb779f6d455ae70882c19c527627a8 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 12 Apr 2016 10:55:03 +0800 Subject: ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock This is Dell usb dock audio workaround. It was fixed the master volume keep lower. [Some background: the patch essentially skips the controls of a couple of FU volumes. Although the firmware exposes the dB and the value information via the usb descriptor, changing the values (we set the min volume as default) screws up the device. Although this has been fixed in the newer firmware, the devices are shipped with the old firmware, thus we need the workaround in the driver side. -- tiwai] Signed-off-by: Kailang Yang Cc: Signed-off-by: Takashi Iwai --- sound/usb/mixer_maps.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'sound/usb') diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c index ddca6547399b..1f8fb0d904e0 100644 --- a/sound/usb/mixer_maps.c +++ b/sound/usb/mixer_maps.c @@ -348,6 +348,16 @@ static struct usbmix_name_map bose_companion5_map[] = { { 0 } /* terminator */ }; +/* + * Dell usb dock with ALC4020 codec had a firmware problem where it got + * screwed up when zero volume is passed; just skip it as a workaround + */ +static const struct usbmix_name_map dell_alc4020_map[] = { + { 16, NULL }, + { 19, NULL }, + { 0 } +}; + /* * Control map entries */ @@ -430,6 +440,10 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = { .id = USB_ID(0x0ccd, 0x0028), .map = aureon_51_2_map, }, + { + .id = USB_ID(0x0bda, 0x4014), + .map = dell_alc4020_map, + }, { .id = USB_ID(0x0dba, 0x1000), .map = mbox1_map, -- cgit v1.2.3-70-g09d2