summaryrefslogtreecommitdiff
path: root/hw/lm832x.c
diff options
context:
space:
mode:
authorbalrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162>2008-05-09 22:16:11 +0000
committerbalrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162>2008-05-09 22:16:11 +0000
commit1d4e547b552213f91f81aadb3db5efc9ba800ef2 (patch)
treef0aea64484a29d07c8bd0384687b8cfab86273e2 /hw/lm832x.c
parent64a88d5d3ac0fa2280eaf1983d974628dcfb9374 (diff)
Add the LM8323-based keyboard of N810.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4400 c046a42c-6fe2-441c-8c8c-71466251a162
Diffstat (limited to 'hw/lm832x.c')
-rw-r--r--hw/lm832x.c535
1 files changed, 535 insertions, 0 deletions
diff --git a/hw/lm832x.c b/hw/lm832x.c
new file mode 100644
index 0000000000..efb80f7e7f
--- /dev/null
+++ b/hw/lm832x.c
@@ -0,0 +1,535 @@
+/*
+ * National Semiconductor LM8322/8323 GPIO keyboard & PWM chips.
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Written by Andrzej Zaborowski <andrew@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "hw.h"
+#include "i2c.h"
+#include "qemu-timer.h"
+#include "console.h"
+
+struct lm_kbd_s {
+ i2c_slave i2c;
+ int i2c_dir;
+ int i2c_cycle;
+ int reg;
+
+ qemu_irq nirq;
+ uint16_t model;
+
+ struct {
+ qemu_irq out[2];
+ int in[2][2];
+ } mux;
+
+ uint8_t config;
+ uint8_t status;
+ uint8_t acttime;
+ uint8_t error;
+ uint8_t clock;
+
+ struct {
+ uint16_t pull;
+ uint16_t mask;
+ uint16_t dir;
+ uint16_t level;
+ qemu_irq out[16];
+ } gpio;
+
+ struct {
+ uint8_t dbnctime;
+ uint8_t size;
+ int start;
+ int len;
+ uint8_t fifo[16];
+ } kbd;
+
+ struct {
+ uint16_t file[256];
+ uint8_t faddr;
+ uint8_t addr[3];
+ QEMUTimer *tm[3];
+ } pwm;
+};
+
+#define INT_KEYPAD (1 << 0)
+#define INT_ERROR (1 << 3)
+#define INT_NOINIT (1 << 4)
+#define INT_PWMEND(n) (1 << (5 + n))
+
+#define ERR_BADPAR (1 << 0)
+#define ERR_CMDUNK (1 << 1)
+#define ERR_KEYOVR (1 << 2)
+#define ERR_FIFOOVR (1 << 6)
+
+static void lm_kbd_irq_update(struct lm_kbd_s *s)
+{
+ qemu_set_irq(s->nirq, !s->status);
+}
+
+static void lm_kbd_gpio_update(struct lm_kbd_s *s)
+{
+}
+
+static void lm_kbd_reset(struct lm_kbd_s *s)
+{
+ s->config = 0x80;
+ s->status = INT_NOINIT;
+ s->acttime = 125;
+ s->kbd.dbnctime = 3;
+ s->kbd.size = 0x33;
+ s->clock = 0x08;
+
+ lm_kbd_irq_update(s);
+ lm_kbd_gpio_update(s);
+}
+
+static void lm_kbd_error(struct lm_kbd_s *s, int err)
+{
+ s->error |= err;
+ s->status |= INT_ERROR;
+ lm_kbd_irq_update(s);
+}
+
+static void lm_kbd_pwm_tick(struct lm_kbd_s *s, int line)
+{
+}
+
+static void lm_kbd_pwm_start(struct lm_kbd_s *s, int line)
+{
+ lm_kbd_pwm_tick(s, line);
+}
+
+static void lm_kbd_pwm0_tick(void *opaque)
+{
+ lm_kbd_pwm_tick(opaque, 0);
+}
+static void lm_kbd_pwm1_tick(void *opaque)
+{
+ lm_kbd_pwm_tick(opaque, 1);
+}
+static void lm_kbd_pwm2_tick(void *opaque)
+{
+ lm_kbd_pwm_tick(opaque, 2);
+}
+
+enum {
+ LM832x_CMD_READ_ID = 0x80, /* Read chip ID. */
+ LM832x_CMD_WRITE_CFG = 0x81, /* Set configuration item. */
+ LM832x_CMD_READ_INT = 0x82, /* Get interrupt status. */
+ LM832x_CMD_RESET = 0x83, /* Reset, same as external one */
+ LM823x_CMD_WRITE_PULL_DOWN = 0x84, /* Select GPIO pull-up/down. */
+ LM832x_CMD_WRITE_PORT_SEL = 0x85, /* Select GPIO in/out. */
+ LM832x_CMD_WRITE_PORT_STATE = 0x86, /* Set GPIO pull-up/down. */
+ LM832x_CMD_READ_PORT_SEL = 0x87, /* Get GPIO in/out. */
+ LM832x_CMD_READ_PORT_STATE = 0x88, /* Get GPIO pull-up/down. */
+ LM832x_CMD_READ_FIFO = 0x89, /* Read byte from FIFO. */
+ LM832x_CMD_RPT_READ_FIFO = 0x8a, /* Read FIFO (no increment). */
+ LM832x_CMD_SET_ACTIVE = 0x8b, /* Set active time. */
+ LM832x_CMD_READ_ERROR = 0x8c, /* Get error status. */
+ LM832x_CMD_READ_ROTATOR = 0x8e, /* Read rotator status. */
+ LM832x_CMD_SET_DEBOUNCE = 0x8f, /* Set debouncing time. */
+ LM832x_CMD_SET_KEY_SIZE = 0x90, /* Set keypad size. */
+ LM832x_CMD_READ_KEY_SIZE = 0x91, /* Get keypad size. */
+ LM832x_CMD_READ_CFG = 0x92, /* Get configuration item. */
+ LM832x_CMD_WRITE_CLOCK = 0x93, /* Set clock config. */
+ LM832x_CMD_READ_CLOCK = 0x94, /* Get clock config. */
+ LM832x_CMD_PWM_WRITE = 0x95, /* Write PWM script. */
+ LM832x_CMD_PWM_START = 0x96, /* Start PWM engine. */
+ LM832x_CMD_PWM_STOP = 0x97, /* Stop PWM engine. */
+};
+
+#define LM832x_MAX_KPX 8
+#define LM832x_MAX_KPY 12
+
+static uint8_t lm_kbd_read(struct lm_kbd_s *s, int reg, int byte)
+{
+ int ret;
+
+ switch (reg) {
+ case LM832x_CMD_READ_ID:
+ ret = 0x0400;
+ break;
+
+ case LM832x_CMD_READ_INT:
+ ret = s->status;
+ if (!(s->status & INT_NOINIT)) {
+ s->status = 0;
+ lm_kbd_irq_update(s);
+ }
+ break;
+
+ case LM832x_CMD_READ_PORT_SEL:
+ ret = s->gpio.dir;
+ break;
+ case LM832x_CMD_READ_PORT_STATE:
+ ret = s->gpio.mask;
+ break;
+
+ case LM832x_CMD_READ_FIFO:
+ if (s->kbd.len <= 1)
+ return 0x00;
+
+ /* Example response from the two commands after a INT_KEYPAD
+ * interrupt caused by the key 0x3c being pressed:
+ * RPT_READ_FIFO: 55 bc 00 4e ff 0a 50 08 00 29 d9 08 01 c9 01
+ * READ_FIFO: bc 00 00 4e ff 0a 50 08 00 29 d9 08 01 c9 01
+ * RPT_READ_FIFO: bc 00 00 4e ff 0a 50 08 00 29 d9 08 01 c9 01
+ *
+ * 55 is the code of the key release event serviced in the previous
+ * interrupt handling.
+ *
+ * TODO: find out whether the FIFO is advanced a single character
+ * before reading every byte or the whole size of the FIFO at the
+ * last LM832x_CMD_READ_FIFO. This affects LM832x_CMD_RPT_READ_FIFO
+ * output in cases where there are more than one event in the FIFO.
+ * Assume 0xbc and 0x3c events are in the FIFO:
+ * RPT_READ_FIFO: 55 bc 3c 00 4e ff 0a 50 08 00 29 d9 08 01 c9
+ * READ_FIFO: bc 3c 00 00 4e ff 0a 50 08 00 29 d9 08 01 c9
+ * Does RPT_READ_FIFO now return 0xbc and 0x3c or only 0x3c?
+ */
+ s->kbd.start ++;
+ s->kbd.start &= sizeof(s->kbd.fifo) - 1;
+ s->kbd.len --;
+
+ return s->kbd.fifo[s->kbd.start];
+ case LM832x_CMD_RPT_READ_FIFO:
+ if (byte >= s->kbd.len)
+ return 0x00;
+
+ return s->kbd.fifo[(s->kbd.start + byte) & (sizeof(s->kbd.fifo) - 1)];
+
+ case LM832x_CMD_READ_ERROR:
+ return s->error;
+
+ case LM832x_CMD_READ_ROTATOR:
+ return 0;
+
+ case LM832x_CMD_READ_KEY_SIZE:
+ return s->kbd.size;
+
+ case LM832x_CMD_READ_CFG:
+ return s->config & 0xf;
+
+ case LM832x_CMD_READ_CLOCK:
+ return (s->clock & 0xfc) | 2;
+
+ default:
+ lm_kbd_error(s, ERR_CMDUNK);
+ fprintf(stderr, "%s: unknown command %02x\n", __FUNCTION__, reg);
+ return 0x00;
+ }
+
+ return ret >> (byte << 3);
+}
+
+static void lm_kbd_write(struct lm_kbd_s *s, int reg, int byte, uint8_t value)
+{
+ switch (reg) {
+ case LM832x_CMD_WRITE_CFG:
+ s->config = value;
+ /* This must be done whenever s->mux.in is updated (never). */
+ if ((s->config >> 1) & 1) /* MUX1EN */
+ qemu_set_irq(s->mux.out[0], s->mux.in[0][(s->config >> 0) & 1]);
+ if ((s->config >> 3) & 1) /* MUX2EN */
+ qemu_set_irq(s->mux.out[0], s->mux.in[0][(s->config >> 2) & 1]);
+ /* TODO: check that this is issued only following the chip reset
+ * and not in the middle of operation and that it is followed by
+ * the GPIO ports re-resablishing through WRITE_PORT_SEL and
+ * WRITE_PORT_STATE (using a timer perhaps) and otherwise output
+ * warnings. */
+ s->status = 0;
+ lm_kbd_irq_update(s);
+ s->kbd.len = 0;
+ s->kbd.start = 0;
+ s->reg = -1;
+ break;
+
+ case LM832x_CMD_RESET:
+ if (value == 0xaa)
+ lm_kbd_reset(s);
+ else
+ lm_kbd_error(s, ERR_BADPAR);
+ s->reg = -1;
+ break;
+
+ case LM823x_CMD_WRITE_PULL_DOWN:
+ if (!byte)
+ s->gpio.pull = value;
+ else {
+ s->gpio.pull |= value << 8;
+ lm_kbd_gpio_update(s);
+ s->reg = -1;
+ }
+ break;
+ case LM832x_CMD_WRITE_PORT_SEL:
+ if (!byte)
+ s->gpio.dir = value;
+ else {
+ s->gpio.dir |= value << 8;
+ lm_kbd_gpio_update(s);
+ s->reg = -1;
+ }
+ break;
+ case LM832x_CMD_WRITE_PORT_STATE:
+ if (!byte)
+ s->gpio.mask = value;
+ else {
+ s->gpio.mask |= value << 8;
+ lm_kbd_gpio_update(s);
+ s->reg = -1;
+ }
+ break;
+
+ case LM832x_CMD_SET_ACTIVE:
+ s->acttime = value;
+ s->reg = -1;
+ break;
+
+ case LM832x_CMD_SET_DEBOUNCE:
+ s->kbd.dbnctime = value;
+ s->reg = -1;
+ if (!value)
+ lm_kbd_error(s, ERR_BADPAR);
+ break;
+
+ case LM832x_CMD_SET_KEY_SIZE:
+ s->kbd.size = value;
+ s->reg = -1;
+ if (
+ (value & 0xf) < 3 || (value & 0xf) > LM832x_MAX_KPY ||
+ (value >> 4) < 3 || (value >> 4) > LM832x_MAX_KPX)
+ lm_kbd_error(s, ERR_BADPAR);
+ break;
+
+ case LM832x_CMD_WRITE_CLOCK:
+ s->clock = value;
+ s->reg = -1;
+ if ((value & 3) && (value & 3) != 3) {
+ lm_kbd_error(s, ERR_BADPAR);
+ fprintf(stderr, "%s: invalid clock setting in RCPWM\n",
+ __FUNCTION__);
+ }
+ /* TODO: Validate that the command is only issued once */
+ break;
+
+ case LM832x_CMD_PWM_WRITE:
+ if (byte == 0) {
+ if (!(value & 3) || (value >> 2) > 59) {
+ lm_kbd_error(s, ERR_BADPAR);
+ s->reg = -1;
+ break;
+ }
+
+ s->pwm.faddr = value;
+ s->pwm.file[s->pwm.faddr] = 0;
+ } else if (byte == 1) {
+ s->pwm.file[s->pwm.faddr] |= value << 8;
+ } else if (byte == 2) {
+ s->pwm.file[s->pwm.faddr] |= value << 0;
+ s->reg = -1;
+ }
+ break;
+ case LM832x_CMD_PWM_START:
+ s->reg = -1;
+ if (!(value & 3) || (value >> 2) > 59) {
+ lm_kbd_error(s, ERR_BADPAR);
+ break;
+ }
+
+ s->pwm.addr[(value & 3) - 1] = value >> 2;
+ lm_kbd_pwm_start(s, (value & 3) - 1);
+ break;
+ case LM832x_CMD_PWM_STOP:
+ s->reg = -1;
+ if (!(value & 3)) {
+ lm_kbd_error(s, ERR_BADPAR);
+ break;
+ }
+
+ qemu_del_timer(s->pwm.tm[(value & 3) - 1]);
+ break;
+
+ case -1:
+ lm_kbd_error(s, ERR_BADPAR);
+ break;
+ default:
+ lm_kbd_error(s, ERR_CMDUNK);
+ fprintf(stderr, "%s: unknown command %02x\n", __FUNCTION__, reg);
+ break;
+ }
+}
+
+static void lm_i2c_event(i2c_slave *i2c, enum i2c_event event)
+{
+ struct lm_kbd_s *s = (struct lm_kbd_s *) i2c;
+
+ switch (event) {
+ case I2C_START_RECV:
+ case I2C_START_SEND:
+ s->i2c_cycle = 0;
+ s->i2c_dir = (event == I2C_START_SEND);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static int lm_i2c_rx(i2c_slave *i2c)
+{
+ struct lm_kbd_s *s = (struct lm_kbd_s *) i2c;
+
+ return lm_kbd_read(s, s->reg, s->i2c_cycle ++);
+}
+
+static int lm_i2c_tx(i2c_slave *i2c, uint8_t data)
+{
+ struct lm_kbd_s *s = (struct lm_kbd_s *) i2c;
+
+ if (!s->i2c_cycle)
+ s->reg = data;
+ else
+ lm_kbd_write(s, s->reg, s->i2c_cycle - 1, data);
+ s->i2c_cycle ++;
+
+ return 0;
+}
+
+static void lm_kbd_save(QEMUFile *f, void *opaque)
+{
+ struct lm_kbd_s *s = (struct lm_kbd_s *) opaque;
+ int i;
+
+ i2c_slave_save(f, &s->i2c);
+ qemu_put_byte(f, s->i2c_dir);
+ qemu_put_byte(f, s->i2c_cycle);
+ qemu_put_byte(f, (uint8_t) s->reg);
+
+ qemu_put_8s(f, &s->config);
+ qemu_put_8s(f, &s->status);
+ qemu_put_8s(f, &s->acttime);
+ qemu_put_8s(f, &s->error);
+ qemu_put_8s(f, &s->clock);
+
+ qemu_put_be16s(f, &s->gpio.pull);
+ qemu_put_be16s(f, &s->gpio.mask);
+ qemu_put_be16s(f, &s->gpio.dir);
+ qemu_put_be16s(f, &s->gpio.level);
+
+ qemu_put_byte(f, s->kbd.dbnctime);
+ qemu_put_byte(f, s->kbd.size);
+ qemu_put_byte(f, s->kbd.start);
+ qemu_put_byte(f, s->kbd.len);
+ qemu_put_buffer(f, s->kbd.fifo, sizeof(s->kbd.fifo));
+
+ for (i = 0; i < sizeof(s->pwm.file); i ++)
+ qemu_put_be16s(f, &s->pwm.file[i]);
+ qemu_put_8s(f, &s->pwm.faddr);
+ qemu_put_buffer(f, s->pwm.addr, sizeof(s->pwm.addr));
+ qemu_put_timer(f, s->pwm.tm[0]);
+ qemu_put_timer(f, s->pwm.tm[1]);
+ qemu_put_timer(f, s->pwm.tm[2]);
+}
+
+static int lm_kbd_load(QEMUFile *f, void *opaque, int version_id)
+{
+ struct lm_kbd_s *s = (struct lm_kbd_s *) opaque;
+ int i;
+
+ i2c_slave_load(f, &s->i2c);
+ s->i2c_dir = qemu_get_byte(f);
+ s->i2c_cycle = qemu_get_byte(f);
+ s->reg = (int8_t) qemu_get_byte(f);
+
+ qemu_get_8s(f, &s->config);
+ qemu_get_8s(f, &s->status);
+ qemu_get_8s(f, &s->acttime);
+ qemu_get_8s(f, &s->error);
+ qemu_get_8s(f, &s->clock);
+
+ qemu_get_be16s(f, &s->gpio.pull);
+ qemu_get_be16s(f, &s->gpio.mask);
+ qemu_get_be16s(f, &s->gpio.dir);
+ qemu_get_be16s(f, &s->gpio.level);
+
+ s->kbd.dbnctime = qemu_get_byte(f);
+ s->kbd.size = qemu_get_byte(f);
+ s->kbd.start = qemu_get_byte(f);
+ s->kbd.len = qemu_get_byte(f);
+ qemu_get_buffer(f, s->kbd.fifo, sizeof(s->kbd.fifo));
+
+ for (i = 0; i < sizeof(s->pwm.file); i ++)
+ qemu_get_be16s(f, &s->pwm.file[i]);
+ qemu_get_8s(f, &s->pwm.faddr);
+ qemu_get_buffer(f, s->pwm.addr, sizeof(s->pwm.addr));
+ qemu_get_timer(f, s->pwm.tm[0]);
+ qemu_get_timer(f, s->pwm.tm[1]);
+ qemu_get_timer(f, s->pwm.tm[2]);
+
+ lm_kbd_irq_update(s);
+ lm_kbd_gpio_update(s);
+
+ return 0;
+}
+
+static int lm_kbd_iid = 0;
+
+struct i2c_slave *lm8323_init(i2c_bus *bus, qemu_irq nirq)
+{
+ struct lm_kbd_s *s;
+
+ s = (struct lm_kbd_s *) i2c_slave_init(bus, 0, sizeof(struct lm_kbd_s));
+ s->model = 0x8323;
+ s->pwm.tm[0] = qemu_new_timer(vm_clock, lm_kbd_pwm0_tick, s);
+ s->pwm.tm[1] = qemu_new_timer(vm_clock, lm_kbd_pwm1_tick, s);
+ s->pwm.tm[2] = qemu_new_timer(vm_clock, lm_kbd_pwm2_tick, s);
+ s->nirq = nirq;
+
+ s->i2c.event = lm_i2c_event;
+ s->i2c.recv = lm_i2c_rx;
+ s->i2c.send = lm_i2c_tx;
+
+ lm_kbd_reset(s);
+
+ qemu_register_reset((void *) lm_kbd_reset, s);
+ register_savevm("LM8323", lm_kbd_iid ++, 0,
+ lm_kbd_save, lm_kbd_load, s);
+
+ return &s->i2c;
+}
+
+void lm832x_key_event(struct i2c_slave *i2c, int key, int state)
+{
+ struct lm_kbd_s *s = (struct lm_kbd_s *) i2c;
+
+ if ((s->status & INT_ERROR) && (s->error & ERR_FIFOOVR))
+ return;
+
+ if (s->kbd.len >= sizeof(s->kbd.fifo))
+ return lm_kbd_error(s, ERR_FIFOOVR);
+
+ s->kbd.fifo[(s->kbd.start + s->kbd.len ++) & (sizeof(s->kbd.fifo) - 1)] =
+ key | (state << 7);
+
+ /* We never set ERR_KEYOVR because we support multiple keys fine. */
+ s->status |= INT_KEYPAD;
+ lm_kbd_irq_update(s);
+}