# -*- Mode: Python -*- # vim: filetype=python # ## # = Remote desktop ## { 'include': 'common.json' } { 'include': 'sockets.json' } ## # @DisplayProtocol: # # Display protocols which support changing password options. # # Since: 7.0 ## { 'enum': 'DisplayProtocol', 'data': [ 'vnc', 'spice' ] } ## # @SetPasswordAction: # # An action to take on changing a password on a connection with active # clients. # # @keep: maintain existing clients # # @fail: fail the command if clients are connected # # @disconnect: disconnect existing clients # # Since: 7.0 ## { 'enum': 'SetPasswordAction', 'data': [ 'keep', 'fail', 'disconnect' ] } ## # @SetPasswordOptions: # # Options for set_password. # # @protocol: # - 'vnc' to modify the VNC server password # - 'spice' to modify the Spice server password # # @password: the new password # # @connected: How to handle existing clients when changing the # password. If nothing is specified, defaults to 'keep'. For # VNC, only 'keep' is currently implemented. # # Since: 7.0 ## { 'union': 'SetPasswordOptions', 'base': { 'protocol': 'DisplayProtocol', 'password': 'str', '*connected': 'SetPasswordAction' }, 'discriminator': 'protocol', 'data': { 'vnc': 'SetPasswordOptionsVnc' } } ## # @SetPasswordOptionsVnc: # # Options for set_password specific to the VNC protocol. # # @display: The id of the display where the password should be # changed. Defaults to the first. # # Since: 7.0 ## { 'struct': 'SetPasswordOptionsVnc', 'data': { '*display': 'str' } } ## # @set_password: # # Set the password of a remote display server. # # Errors: # - If Spice is not enabled, DeviceNotFound # # Since: 0.14 # # .. qmp-example:: # # -> { "execute": "set_password", "arguments": { "protocol": "vnc", # "password": "secret" } } # <- { "return": {} } ## { 'command': 'set_password', 'boxed': true, 'data': 'SetPasswordOptions' } ## # @ExpirePasswordOptions: # # General options for expire_password. # # @protocol: # - 'vnc' to modify the VNC server expiration # - 'spice' to modify the Spice server expiration # # @time: when to expire the password. # # - 'now' to expire the password immediately # - 'never' to cancel password expiration # - '+INT' where INT is the number of seconds from now (integer) # - 'INT' where INT is the absolute time in seconds # # .. note:: Time is relative to the server and currently there is no # way to coordinate server time with client time. It is not # recommended to use the absolute time version of the @time # parameter unless you're sure you are on the same machine as the # QEMU instance. # # Since: 7.0 ## { 'union': 'ExpirePasswordOptions', 'base': { 'protocol': 'DisplayProtocol', 'time': 'str' }, 'discriminator': 'protocol', 'data': { 'vnc': 'ExpirePasswordOptionsVnc' } } ## # @ExpirePasswordOptionsVnc: # # Options for expire_password specific to the VNC protocol. # # @display: The id of the display where the expiration should be # changed. Defaults to the first. # # Since: 7.0 ## { 'struct': 'ExpirePasswordOptionsVnc', 'data': { '*display': 'str' } } ## # @expire_password: # # Expire the password of a remote display server. # # Errors: # - If @protocol is 'spice' and Spice is not active, # DeviceNotFound # # Since: 0.14 # # .. qmp-example:: # # -> { "execute": "expire_password", "arguments": { "protocol": "vnc", # "time": "+60" } } # <- { "return": {} } ## { 'command': 'expire_password', 'boxed': true, 'data': 'ExpirePasswordOptions' } ## # @ImageFormat: # # Supported image format types. # # @png: PNG format # # @ppm: PPM format # # Since: 7.1 ## { 'enum': 'ImageFormat', 'data': ['ppm', 'png'] } ## # @screendump: # # Capture the contents of a screen and write it to a file. # # @filename: the path of a new file to store the image # # @device: ID of the display device that should be dumped. If this # parameter is missing, the primary display will be used. (Since # 2.12) # # @head: head to use in case the device supports multiple heads. If # this parameter is missing, head #0 will be used. Also note that # the head can only be specified in conjunction with the device # ID. (Since 2.12) # # @format: image format for screendump. (default: ppm) (Since 7.1) # # Since: 0.14 # # .. qmp-example:: # # -> { "execute": "screendump", # "arguments": { "filename": "/tmp/image" } } # <- { "return": {} } ## { 'command': 'screendump', 'data': {'filename': 'str', '*device': 'str', '*head': 'int', '*format': 'ImageFormat'}, 'coroutine': true, 'if': 'CONFIG_PIXMAN' } ## # == Spice ## ## # @SpiceBasicInfo: # # The basic information for SPICE network connection # # @host: IP address # # @port: port number # # @family: address family # # Since: 2.1 ## { 'struct': 'SpiceBasicInfo', 'data': { 'host': 'str', 'port': 'str', 'family': 'NetworkAddressFamily' }, 'if': 'CONFIG_SPICE' } ## # @SpiceServerInfo: # # Information about a SPICE server # # @auth: authentication method # # Since: 2.1 ## { 'struct': 'SpiceServerInfo', 'base': 'SpiceBasicInfo', 'data': { '*auth': 'str' }, 'if': 'CONFIG_SPICE' } ## # @SpiceChannel: # # Information about a SPICE client channel. # # @connection-id: SPICE connection id number. All channels with the # same id belong to the same SPICE session. # # @channel-type: SPICE channel type number. "1" is the main control # channel, filter for this one if you want to track spice sessions # only # # @channel-id: SPICE channel ID number. Usually "0", might be # different when multiple channels of the same type exist, such as # multiple display channels in a multihead setup # # @tls: true if the channel is encrypted, false otherwise. # # Since: 0.14 ## { 'struct': 'SpiceChannel', 'base': 'SpiceBasicInfo', 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int', 'tls': 'bool'}, 'if': 'CONFIG_SPICE' } ## # @SpiceQueryMouseMode: # # An enumeration of Spice mouse states. # # @client: Mouse cursor position is determined by the client. # # @server: Mouse cursor position is determined by the server. # # @unknown: No information is available about mouse mode used by the # spice server. # # Since: 1.1 ## { 'enum': 'SpiceQueryMouseMode', 'data': [ 'client', 'server', 'unknown' ], 'if': 'CONFIG_SPICE' } ## # @SpiceInfo: # # Information about the SPICE session. # # @enabled: true if the SPICE server is enabled, false otherwise # # @migrated: true if the last guest migration completed and spice # migration had completed as well, false otherwise (since 1.4) # # @host: The hostname the SPICE server is bound to. This depends on # the name resolution on the host and may be an IP address. # # @port: The SPICE server's port number. # # @compiled-version: SPICE server version. # # @tls-port: The SPICE server's TLS port number. # # @auth: the current authentication type used by the server # # - 'none' if no authentication is being used # - 'spice' uses SASL or direct TLS authentication, depending on # command line options # # @mouse-mode: The mode in which the mouse cursor is displayed # currently. Can be determined by the client or the server, or # unknown if spice server doesn't provide this information. # (since: 1.1) # # @channels: a list of @SpiceChannel for each active spice channel # # Since: 0.14 ## { 'struct': 'SpiceInfo', 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int', '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str', 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']}, 'if': 'CONFIG_SPICE' } ## # @query-spice: # # Returns information about the current SPICE server # # Returns: @SpiceInfo # # Since: 0.14 # # .. qmp-example:: # # -> { "execute": "query-spice" } # <- { "return": { # "enabled": true, # "auth": "spice", # "port": 5920, # "migrated":false, # "tls-port": 5921, # "host": "0.0.0.0", # "mouse-mode":"client", # "channels": [ # { # "port": "54924", # "family": "ipv4", # "channel-type": 1, # "connection-id": 1804289383, # "host": "127.0.0.1", # "channel-id": 0, # "tls": true # }, # { # "port": "36710", # "family": "ipv4", # "channel-type": 4, # "connection-id": 1804289383, # "host": "127.0.0.1", # "channel-id": 0, # "tls": false # }, # ... # ] # } # } ## { 'command': 'query-spice', 'returns': 'SpiceInfo', 'if': 'CONFIG_SPICE' } ## # @SPICE_CONNECTED: # # Emitted when a SPICE client establishes a connection # # @server: server information # # @client: client information # # Since: 0.14 # # .. qmp-example:: # # <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, # "event": "SPICE_CONNECTED", # "data": { # "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, # "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} # }} ## { 'event': 'SPICE_CONNECTED', 'data': { 'server': 'SpiceBasicInfo', 'client': 'SpiceBasicInfo' }, 'if': 'CONFIG_SPICE' } ## # @SPICE_INITIALIZED: # # Emitted after initial handshake and authentication takes place (if # any) and the SPICE channel is up and running # # @server: server information # # @client: client information # # Since: 0.14 # # .. qmp-example:: # # <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, # "event": "SPICE_INITIALIZED", # "data": {"server": {"auth": "spice", "port": "5921", # "family": "ipv4", "host": "127.0.0.1"}, # "client": {"port": "49004", "family": "ipv4", "channel-type": 3, # "connection-id": 1804289383, "host": "127.0.0.1", # "channel-id": 0, "tls": true} # }} ## { 'event': 'SPICE_INITIALIZED', 'data': { 'server': 'SpiceServerInfo', 'client': 'SpiceChannel' }, 'if': 'CONFIG_SPICE' } ## # @SPICE_DISCONNECTED: # # Emitted when the SPICE connection is closed # # @server: server information # # @client: client information # # Since: 0.14 # # .. qmp-example:: # # <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, # "event": "SPICE_DISCONNECTED", # "data": { # "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, # "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} # }} ## { 'event': 'SPICE_DISCONNECTED', 'data': { 'server': 'SpiceBasicInfo', 'client': 'SpiceBasicInfo' }, 'if': 'CONFIG_SPICE' } ## # @SPICE_MIGRATE_COMPLETED: # # Emitted when SPICE migration has completed # # Since: 1.3 # # .. qmp-example:: # # <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, # "event": "SPICE_MIGRATE_COMPLETED" } ## { 'event': 'SPICE_MIGRATE_COMPLETED', 'if': 'CONFIG_SPICE' } ## # == VNC ## ## # @VncBasicInfo: # # The basic information for vnc network connection # # @host: IP address # # @service: The service name of the vnc port. This may depend on the # host system's service database so symbolic names should not be # relied on. # # @family: address family # # @websocket: true in case the socket is a websocket (since 2.3). # # Since: 2.1 ## { 'struct': 'VncBasicInfo', 'data': { 'host': 'str', 'service': 'str', 'family': 'NetworkAddressFamily', 'websocket': 'bool' }, 'if': 'CONFIG_VNC' } ## # @VncServerInfo: # # The network connection information for server # # @auth: authentication method used for the plain (non-websocket) VNC # server # # Since: 2.1 ## { 'struct': 'VncServerInfo', 'base': 'VncBasicInfo', 'data': { '*auth': 'str' }, 'if': 'CONFIG_VNC' } ## # @VncClientInfo: # # Information about a connected VNC client. # # @x509_dname: If x509 authentication is in use, the Distinguished # Name of the client. # # @sasl_username: If SASL authentication is in use, the SASL username # used for authentication. # # Since: 0.14 ## { 'struct': 'VncClientInfo', 'base': 'VncBasicInfo', 'data': { '*x509_dname': 'str', '*sasl_username': 'str' }, 'if': 'CONFIG_VNC' } ## # @VncInfo: # # Information about the VNC session. # # @enabled: true if the VNC server is enabled, false otherwise # # @host: The hostname the VNC server is bound to. This depends on the # name resolution on the host and may be an IP address. # # @family: # - 'ipv6' if the host is listening for IPv6 connections # - 'ipv4' if the host is listening for IPv4 connections # - 'unix' if the host is listening on a unix domain socket # - 'unknown' otherwise # # @service: The service name of the server's port. This may depends # on the host system's service database so symbolic names should # not be relied on. # # @auth: the current authentication type used by the server # # - 'none' if no authentication is being used # - 'vnc' if VNC authentication is being used # - 'vencrypt+plain' if VEncrypt is used with plain text # authentication # - 'vencrypt+tls+none' if VEncrypt is used with TLS and no # authentication # - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC # authentication # - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain # text auth # - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth # - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth # - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain # text auth # - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth # - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL # auth # # @clients: a list of @VncClientInfo of all currently connected # clients # # Since: 0.14 ## { 'struct': 'VncInfo', 'data': {'enabled': 'bool', '*host': 'str', '*family': 'NetworkAddressFamily', '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']}, 'if': 'CONFIG_VNC' } ## # @VncPrimaryAuth: # # vnc primary authentication method. # # Since: 2.3 ## { 'enum': 'VncPrimaryAuth', 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra', 'tls', 'vencrypt', 'sasl' ], 'if': 'CONFIG_VNC' } ## # @VncVencryptSubAuth: # # vnc sub authentication method with vencrypt. # # Since: 2.3 ## { 'enum': 'VncVencryptSubAuth', 'data': [ 'plain', 'tls-none', 'x509-none', 'tls-vnc', 'x509-vnc', 'tls-plain', 'x509-plain', 'tls-sasl', 'x509-sasl' ], 'if': 'CONFIG_VNC' } ## # @VncServerInfo2: # # The network connection information for server # # @auth: The current authentication type used by the servers # # @vencrypt: The vencrypt sub authentication type used by the servers, # only specified in case auth == vencrypt. # # Since: 2.9 ## { 'struct': 'VncServerInfo2', 'base': 'VncBasicInfo', 'data': { 'auth' : 'VncPrimaryAuth', '*vencrypt' : 'VncVencryptSubAuth' }, 'if': 'CONFIG_VNC' } ## # @VncInfo2: # # Information about a vnc server # # @id: vnc server name. # # @server: A list of @VncBasincInfo describing all listening sockets. # The list can be empty (in case the vnc server is disabled). It # also may have multiple entries: normal + websocket, possibly # also ipv4 + ipv6 in the future. # # @clients: A list of @VncClientInfo of all currently connected # clients. The list can be empty, for obvious reasons. # # @auth: The current authentication type used by the non-websockets # servers # # @vencrypt: The vencrypt authentication type used by the servers, # only specified in case auth == vencrypt. # # @display: The display device the vnc server is linked to. # # Since: 2.3 ## { 'struct': 'VncInfo2', 'data': { 'id' : 'str', 'server' : ['VncServerInfo2'], 'clients' : ['VncClientInfo'], 'auth' : 'VncPrimaryAuth', '*vencrypt' : 'VncVencryptSubAuth', '*display' : 'str' }, 'if': 'CONFIG_VNC' } ## # @query-vnc: # # Returns information about the current VNC server # # Returns: @VncInfo # # Since: 0.14 # # .. qmp-example:: # # -> { "execute": "query-vnc" } # <- { "return": { # "enabled":true, # "host":"0.0.0.0", # "service":"50402", # "auth":"vnc", # "family":"ipv4", # "clients":[ # { # "host":"127.0.0.1", # "service":"50401", # "family":"ipv4", # "websocket":false # } # ] # } # } ## { 'command': 'query-vnc', 'returns': 'VncInfo', 'if': 'CONFIG_VNC' } ## # @query-vnc-servers: # # Returns a list of vnc servers. The list can be empty. # # Returns: a list of @VncInfo2 # # Since: 2.3 ## { 'command': 'query-vnc-servers', 'returns': ['VncInfo2'], 'if': 'CONFIG_VNC' } ## # @change-vnc-password: # # Change the VNC server password. # # @password: the new password to use with VNC authentication # # Since: 1.1 # # .. note:: An empty password in this command will set the password to # the empty string. Existing clients are unaffected by executing # this command. ## { 'command': 'change-vnc-password', 'data': { 'password': 'str' }, 'if': 'CONFIG_VNC' } ## # @VNC_CONNECTED: # # Emitted when a VNC client establishes a connection # # @server: server information # # @client: client information # # .. note:: This event is emitted before any authentication takes # place, thus the authentication ID is not provided. # # Since: 0.13 # # .. qmp-example:: # # <- { "event": "VNC_CONNECTED", # "data": { # "server": { "auth": "sasl", "family": "ipv4", "websocket": false, # "service": "5901", "host": "0.0.0.0" }, # "client": { "family": "ipv4", "service": "58425", # "host": "127.0.0.1", "websocket": false } }, # "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } ## { 'event': 'VNC_CONNECTED', 'data': { 'server': 'VncServerInfo', 'client': 'VncBasicInfo' }, 'if': 'CONFIG_VNC' } ## # @VNC_INITIALIZED: # # Emitted after authentication takes place (if any) and the VNC # session is made active # # @server: server information # # @client: client information # # Since: 0.13 # # .. qmp-example:: # # <- { "event": "VNC_INITIALIZED", # "data": { # "server": { "auth": "sasl", "family": "ipv4", "websocket": false, # "service": "5901", "host": "0.0.0.0"}, # "client": { "family": "ipv4", "service": "46089", "websocket": false, # "host": "127.0.0.1", "sasl_username": "luiz" } }, # "timestamp": { "seconds": 1263475302, "microseconds": 150772 } } ## { 'event': 'VNC_INITIALIZED', 'data': { 'server': 'VncServerInfo', 'client': 'VncClientInfo' }, 'if': 'CONFIG_VNC' } ## # @VNC_DISCONNECTED: # # Emitted when the connection is closed # # @server: server information # # @client: client information # # Since: 0.13 # # .. qmp-example:: # # <- { "event": "VNC_DISCONNECTED", # "data": { # "server": { "auth": "sasl", "family": "ipv4", "websocket": false, # "service": "5901", "host": "0.0.0.0" }, # "client": { "family": "ipv4", "service": "58425", "websocket": false, # "host": "127.0.0.1", "sasl_username": "luiz" } }, # "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } ## { 'event': 'VNC_DISCONNECTED', 'data': { 'server': 'VncServerInfo', 'client': 'VncClientInfo' }, 'if': 'CONFIG_VNC' } ## # = Input ## ## # @MouseInfo: # # Information about a mouse device. # # @name: the name of the mouse device # # @index: the index of the mouse device # # @current: true if this device is currently receiving mouse events # # @absolute: true if this device supports absolute coordinates as # input # # Since: 0.14 ## { 'struct': 'MouseInfo', 'data': {'name': 'str', 'index': 'int', 'current': 'bool', 'absolute': 'bool'} } ## # @query-mice: # # Returns information about each active mouse device # # Returns: a list of @MouseInfo for each device # # Since: 0.14 # # .. qmp-example:: # # -> { "execute": "query-mice" } # <- { "return": [ # { # "name":"QEMU Microsoft Mouse", # "index":0, # "current":false, # "absolute":false # }, # { # "name":"QEMU PS/2 Mouse", # "index":1, # "current":true, # "absolute":true # } # ] # } ## { 'command': 'query-mice', 'returns': ['MouseInfo'] } ## # @QKeyCode: # # An enumeration of key name. # # This is used by the @send-key command. # # @unmapped: since 2.0 # # @pause: since 2.0 # # @ro: since 2.4 # # @kp_comma: since 2.4 # # @kp_equals: since 2.6 # # @power: since 2.6 # # @hiragana: since 2.9 # # @henkan: since 2.9 # # @yen: since 2.9 # # @sleep: since 2.10 # # @wake: since 2.10 # # @audionext: since 2.10 # # @audioprev: since 2.10 # # @audiostop: since 2.10 # # @audioplay: since 2.10 # # @audiomute: since 2.10 # # @volumeup: since 2.10 # # @volumedown: since 2.10 # # @mediaselect: since 2.10 # # @mail: since 2.10 # # @calculator: since 2.10 # # @computer: since 2.10 # # @ac_home: since 2.10 # # @ac_back: since 2.10 # # @ac_forward: since 2.10 # # @ac_refresh: since 2.10 # # @ac_bookmarks: since 2.10 # # @muhenkan: since 2.12 # # @katakanahiragana: since 2.12 # # @lang1: since 6.1 # # @lang2: since 6.1 # # @f13: since 8.0 # # @f14: since 8.0 # # @f15: since 8.0 # # @f16: since 8.0 # # @f17: since 8.0 # # @f18: since 8.0 # # @f19: since 8.0 # # @f20: since 8.0 # # @f21: since 8.0 # # @f22: since 8.0 # # @f23: since 8.0 # # @f24: since 8.0 # # 'sysrq' was mistakenly added to hack around the fact that the ps2 # driver was not generating correct scancodes sequences when # 'alt+print' was pressed. This flaw is now fixed and the 'sysrq' key # serves no further purpose. Any further use of 'sysrq' will be # transparently changed to 'print', so they are effectively synonyms. # # Since: 1.3 ## { 'enum': 'QKeyCode', 'data': [ 'unmapped', 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl', 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e', 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right', 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon', 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b', 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock', 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10', 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply', 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0', 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8', 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end', 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again', 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut', 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana', 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake', 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute', 'volumeup', 'volumedown', 'mediaselect', 'mail', 'calculator', 'computer', 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks', 'lang1', 'lang2','f13','f14','f15','f16','f17','f18','f19','f20','f21','f22','f23','f24' ] } ## # @KeyValueKind: # # Since: 1.3 ## { 'enum': 'KeyValueKind', 'data': [ 'number', 'qcode' ] } ## # @IntWrapper: # # @data: a numeric key code # # Since: 1.3 ## { 'struct': 'IntWrapper', 'data': { 'data': 'int' } } ## # @QKeyCodeWrapper: # # @data: An enumeration of key name # # Since: 1.3 ## { 'struct': 'QKeyCodeWrapper', 'data': { 'data': 'QKeyCode' } } ## # @KeyValue: # # Represents a keyboard key. # # @type: key encoding # # Since: 1.3 ## { 'union': 'KeyValue', 'base': { 'type': 'KeyValueKind' }, 'discriminator': 'type', 'data': { 'number': 'IntWrapper', 'qcode': 'QKeyCodeWrapper' } } ## # @send-key: # # Send keys to guest. # # @keys: An array of @KeyValue elements. All @KeyValues in this array # are simultaneously sent to the guest. A @KeyValue.number value # is sent directly to the guest, while @KeyValue.qcode must be a # valid @QKeyCode value # # @hold-time: time to delay key up events, milliseconds. Defaults to # 100 # # Errors: # - If key is unknown or redundant, GenericError # # Since: 1.3 # # .. qmp-example:: # # -> { "execute": "send-key", # "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" }, # { "type": "qcode", "data": "alt" }, # { "type": "qcode", "data": "delete" } ] } } # <- { "return": {} } ## { 'command': 'send-key', 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } } ## # @InputButton: # # Button of a pointer input device (mouse, tablet). # # @side: front side button of a 5-button mouse (since 2.9) # # @extra: rear side button of a 5-button mouse (since 2.9) # # @touch: screen contact on a multi-touch device (since 8.1) # # Since: 2.0 ## { 'enum' : 'InputButton', 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side', 'extra', 'wheel-left', 'wheel-right', 'touch' ] } ## # @InputAxis: # # Position axis of a pointer input device (mouse, tablet). # # Since: 2.0 ## { 'enum' : 'InputAxis', 'data' : [ 'x', 'y' ] } ## # @InputMultiTouchType: # # Type of a multi-touch event. # # @begin: A new touch event sequence has just started. # # @update: A touch event sequence has been updated. # # @end: A touch event sequence has finished. # # @cancel: A touch event sequence has been canceled. # # @data: Absolute position data. # # Since: 8.1 ## { 'enum' : 'InputMultiTouchType', 'data' : [ 'begin', 'update', 'end', 'cancel', 'data' ] } ## # @InputKeyEvent: # # Keyboard input event. # # @key: Which key this event is for. # # @down: True for key-down and false for key-up events. # # Since: 2.0 ## { 'struct' : 'InputKeyEvent', 'data' : { 'key' : 'KeyValue', 'down' : 'bool' } } ## # @InputBtnEvent: # # Pointer button input event. # # @button: Which button this event is for. # # @down: True for key-down and false for key-up events. # # Since: 2.0 ## { 'struct' : 'InputBtnEvent', 'data' : { 'button' : 'InputButton', 'down' : 'bool' } } ## # @InputMoveEvent: # # Pointer motion input event. # # @axis: Which axis is referenced by @value. # # @value: Pointer position. For absolute coordinates the valid range # is 0 -> 0x7ffff # # Since: 2.0 ## { 'struct' : 'InputMoveEvent', 'data' : { 'axis' : 'InputAxis', 'value' : 'int' } } ## # @InputMultiTouchEvent: # # MultiTouch input event. # # @type: The type of multi-touch event. # # @slot: Which slot has generated the event. # # @tracking-id: ID to correlate this event with previously generated # events. # # @axis: Which axis is referenced by @value. # # @value: Contact position. # # Since: 8.1 ## { 'struct' : 'InputMultiTouchEvent', 'data' : { 'type' : 'InputMultiTouchType', 'slot' : 'int', 'tracking-id': 'int', 'axis' : 'InputAxis', 'value' : 'int' } } ## # @InputEventKind: # # @key: a keyboard input event # # @btn: a pointer button input event # # @rel: a relative pointer motion input event # # @abs: an absolute pointer motion input event # # @mtt: a multi-touch input event # # Since: 2.0 ## { 'enum': 'InputEventKind', 'data': [ 'key', 'btn', 'rel', 'abs', 'mtt' ] } ## # @InputKeyEventWrapper: # # @data: Keyboard input event # # Since: 2.0 ## { 'struct': 'InputKeyEventWrapper', 'data': { 'data': 'InputKeyEvent' } } ## # @InputBtnEventWrapper: # # @data: Pointer button input event # # Since: 2.0 ## { 'struct': 'InputBtnEventWrapper', 'data': { 'data': 'InputBtnEvent' } } ## # @InputMoveEventWrapper: # # @data: Pointer motion input event # # Since: 2.0 ## { 'struct': 'InputMoveEventWrapper', 'data': { 'data': 'InputMoveEvent' } } ## # @InputMultiTouchEventWrapper: # # @data: MultiTouch input event # # Since: 8.1 ## { 'struct': 'InputMultiTouchEventWrapper', 'data': { 'data': 'InputMultiTouchEvent' } } ## # @InputEvent: # # Input event union. # # @type: the type of input event # # Since: 2.0 ## { 'union' : 'InputEvent', 'base': { 'type': 'InputEventKind' }, 'discriminator': 'type', 'data' : { 'key' : 'InputKeyEventWrapper', 'btn' : 'InputBtnEventWrapper', 'rel' : 'InputMoveEventWrapper', 'abs' : 'InputMoveEventWrapper', 'mtt' : 'InputMultiTouchEventWrapper' } } ## # @input-send-event: # # Send input event(s) to guest. # # The @device and @head parameters can be used to send the input event # to specific input devices in case (a) multiple input devices of the # same kind are added to the virtual machine and (b) you have # configured input routing (see docs/multiseat.txt) for those input # devices. The parameters work exactly like the device and head # properties of input devices. If @device is missing, only devices # that have no input routing config are admissible. If @device is # specified, both input devices with and without input routing config # are admissible, but devices with input routing config take # precedence. # # @device: display device to send event(s) to. # # @head: head to send event(s) to, in case the display device supports # multiple scanouts. # # @events: List of InputEvent union. # # Since: 2.6 # # .. note:: The consoles are visible in the qom tree, under # ``/backend/console[$index]``. They have a device link and head # property, so it is possible to map which console belongs to which # device and display. # # .. qmp-example:: # :title: Press left mouse button # # -> { "execute": "input-send-event", # "arguments": { "device": "video0", # "events": [ { "type": "btn", # "data" : { "down": true, "button": "left" } } ] } } # <- { "return": {} } # # -> { "execute": "input-send-event", # "arguments": { "device": "video0", # "events": [ { "type": "btn", # "data" : { "down": false, "button": "left" } } ] } } # <- { "return": {} } # # .. qmp-example:: # :title: Press ctrl-alt-del # # -> { "execute": "input-send-event", # "arguments": { "events": [ # { "type": "key", "data" : { "down": true, # "key": {"type": "qcode", "data": "ctrl" } } }, # { "type": "key", "data" : { "down": true, # "key": {"type": "qcode", "data": "alt" } } }, # { "type": "key", "data" : { "down": true, # "key": {"type": "qcode", "data": "delete" } } } ] } } # <- { "return": {} } # # .. qmp-example:: # :title: Move mouse pointer to absolute coordinates # # -> { "execute": "input-send-event" , # "arguments": { "events": [ # { "type": "abs", "data" : { "axis": "x", "value" : 20000 } }, # { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } } # <- { "return": {} } ## { 'command': 'input-send-event', 'data': { '*device': 'str', '*head' : 'int', 'events' : [ 'InputEvent' ] } } ## # @DisplayGTK: # # GTK display options. # # @grab-on-hover: Grab keyboard input on mouse hover. # # @zoom-to-fit: Zoom guest display to fit into the host window. When # turned off the host window will be resized instead. In case the # display device can notify the guest on window resizes # (virtio-gpu) this will default to "on", assuming the guest will # resize the display to match the window size then. Otherwise it # defaults to "off". (Since 3.1) # # @show-tabs: Display the tab bar for switching between the various # graphical interfaces (e.g. VGA and virtual console character # devices) by default. (Since 7.1) # # @show-menubar: Display the main window menubar. Defaults to "on". # (Since 8.0) # # Since: 2.12 ## { 'struct' : 'DisplayGTK', 'data' : { '*grab-on-hover' : 'bool', '*zoom-to-fit' : 'bool', '*show-tabs' : 'bool', '*show-menubar' : 'bool' } } ## # @DisplayEGLHeadless: # # EGL headless display options. # # @rendernode: Which DRM render node should be used. Default is the # first available node on the host. # # Since: 3.1 ## { 'struct' : 'DisplayEGLHeadless', 'data' : { '*rendernode' : 'str' } } ## # @DisplayDBus: # # DBus display options. # # @addr: The D-Bus bus address (default to the session bus). # # @rendernode: Which DRM render node should be used. Default is the # first available node on the host. # # @p2p: Whether to use peer-to-peer connections (accepted through # @add_client). # # @audiodev: Use the specified DBus audiodev to export audio. # # Since: 7.0 ## { 'struct' : 'DisplayDBus', 'data' : { '*rendernode' : 'str', '*addr': 'str', '*p2p': 'bool', '*audiodev': 'str' } } ## # @DisplayGLMode: # # Display OpenGL mode. # # @off: Disable OpenGL (default). # # @on: Use OpenGL, pick context type automatically. Would better be # named 'auto' but is called 'on' for backward compatibility with # bool type. # # @core: Use OpenGL with Core (desktop) Context. # # @es: Use OpenGL with ES (embedded systems) Context. # # Since: 3.0 ## { 'enum' : 'DisplayGLMode', 'data' : [ 'off', 'on', 'core', 'es' ] } ## # @DisplayCurses: # # Curses display options. # # @charset: Font charset used by guest (default: CP437). # # Since: 4.0 ## { 'struct' : 'DisplayCurses', 'data' : { '*charset' : 'str' } } ## # @DisplayCocoa: # # Cocoa display options. # # @left-command-key: Enable/disable forwarding of left command key to # guest. Allows command-tab window switching on the host without # sending this key to the guest when "off". Defaults to "on" # # @full-grab: Capture all key presses, including system combos. This # requires accessibility permissions, since it performs a global # grab on key events. (default: off) See # https://support.apple.com/en-in/guide/mac-help/mh32356/mac # # @swap-opt-cmd: Swap the Option and Command keys so that their key # codes match their position on non-Mac keyboards and you can use # Meta/Super and Alt where you expect them. (default: off) # # @zoom-to-fit: Zoom guest display to fit into the host window. When # turned off the host window will be resized instead. Defaults to # "off". (Since 8.2) # # @zoom-interpolation: Apply interpolation to smooth output when # zoom-to-fit is enabled. Defaults to "off". (Since 9.0) # # Since: 7.0 ## { 'struct': 'DisplayCocoa', 'data': { '*left-command-key': 'bool', '*full-grab': 'bool', '*swap-opt-cmd': 'bool', '*zoom-to-fit': 'bool', '*zoom-interpolation': 'bool' } } ## # @HotKeyMod: # # Set of modifier keys that need to be held for shortcut key actions. # # Since: 7.1 ## { 'enum' : 'HotKeyMod', 'data' : [ 'lctrl-lalt', 'lshift-lctrl-lalt', 'rctrl' ] } ## # @DisplaySDL: # # SDL2 display options. # # @grab-mod: Modifier keys that should be pressed together with the # "G" key to release the mouse grab. # # Since: 7.1 ## { 'struct' : 'DisplaySDL', 'data' : { '*grab-mod' : 'HotKeyMod' } } ## # @DisplayType: # # Display (user interface) type. # # @default: The default user interface, selecting from the first # available of gtk, sdl, cocoa, and vnc. # # @none: No user interface or video output display. The guest will # still see an emulated graphics card, but its output will not be # displayed to the QEMU user. # # @gtk: The GTK user interface. # # @sdl: The SDL user interface. # # @egl-headless: No user interface, offload GL operations to a local # DRI device. Graphical display need to be paired with VNC or # Spice. (Since 3.1) # # @curses: Display video output via curses. For graphics device # models which support a text mode, QEMU can display this output # using a curses/ncurses interface. Nothing is displayed when the # graphics device is in graphical mode or if the graphics device # does not support a text mode. Generally only the VGA device # models support text mode. # # @cocoa: The Cocoa user interface. # # @spice-app: Set up a Spice server and run the default associated # application to connect to it. The server will redirect the # serial console and QEMU monitors. (Since 4.0) # # @dbus: Start a D-Bus service for the display. (Since 7.0) # # Since: 2.12 ## { 'enum' : 'DisplayType', 'data' : [ { 'name': 'default' }, { 'name': 'none' }, { 'name': 'gtk', 'if': 'CONFIG_GTK' }, { 'name': 'sdl', 'if': 'CONFIG_SDL' }, { 'name': 'egl-headless', 'if': 'CONFIG_OPENGL' }, { 'name': 'curses', 'if': 'CONFIG_CURSES' }, { 'name': 'cocoa', 'if': 'CONFIG_COCOA' }, { 'name': 'spice-app', 'if': 'CONFIG_SPICE' }, { 'name': 'dbus', 'if': 'CONFIG_DBUS_DISPLAY' } ] } ## # @DisplayOptions: # # Display (user interface) options. # # @type: Which DisplayType qemu should use. # # @full-screen: Start user interface in fullscreen mode # (default: off). # # @window-close: Allow to quit qemu with window close button # (default: on). # # @show-cursor: Force showing the mouse cursor (default: off). # (since: 5.0) # # @gl: Enable OpenGL support (default: off). # # Since: 2.12 ## { 'union' : 'DisplayOptions', 'base' : { 'type' : 'DisplayType', '*full-screen' : 'bool', '*window-close' : 'bool', '*show-cursor' : 'bool', '*gl' : 'DisplayGLMode' }, 'discriminator' : 'type', 'data' : { 'gtk': { 'type': 'DisplayGTK', 'if': 'CONFIG_GTK' }, 'cocoa': { 'type': 'DisplayCocoa', 'if': 'CONFIG_COCOA' }, 'curses': { 'type': 'DisplayCurses', 'if': 'CONFIG_CURSES' }, 'egl-headless': { 'type': 'DisplayEGLHeadless', 'if': 'CONFIG_OPENGL' }, 'dbus': { 'type': 'DisplayDBus', 'if': 'CONFIG_DBUS_DISPLAY' }, 'sdl': { 'type': 'DisplaySDL', 'if': 'CONFIG_SDL' } } } ## # @query-display-options: # # Returns information about display configuration # # Returns: @DisplayOptions # # Since: 3.1 ## { 'command': 'query-display-options', 'returns': 'DisplayOptions' } ## # @DisplayReloadType: # # Available DisplayReload types. # # @vnc: VNC display # # Since: 6.0 ## { 'enum': 'DisplayReloadType', 'data': ['vnc'] } ## # @DisplayReloadOptionsVNC: # # Specify the VNC reload options. # # @tls-certs: reload tls certs or not. # # Since: 6.0 ## { 'struct': 'DisplayReloadOptionsVNC', 'data': { '*tls-certs': 'bool' } } ## # @DisplayReloadOptions: # # Options of the display configuration reload. # # @type: Specify the display type. # # Since: 6.0 ## { 'union': 'DisplayReloadOptions', 'base': {'type': 'DisplayReloadType'}, 'discriminator': 'type', 'data': { 'vnc': 'DisplayReloadOptionsVNC' } } ## # @display-reload: # # Reload display configuration. # # Since: 6.0 # # .. qmp-example:: # # -> { "execute": "display-reload", # "arguments": { "type": "vnc", "tls-certs": true } } # <- { "return": {} } ## { 'command': 'display-reload', 'data': 'DisplayReloadOptions', 'boxed' : true } ## # @DisplayUpdateType: # # Available DisplayUpdate types. # # @vnc: VNC display # # Since: 7.1 ## { 'enum': 'DisplayUpdateType', 'data': ['vnc'] } ## # @DisplayUpdateOptionsVNC: # # Specify the VNC reload options. # # @addresses: If specified, change set of addresses to listen for # connections. Addresses configured for websockets are not # touched. # # Since: 7.1 ## { 'struct': 'DisplayUpdateOptionsVNC', 'data': { '*addresses': ['SocketAddress'] } } ## # @DisplayUpdateOptions: # # Options of the display configuration reload. # # @type: Specify the display type. # # Since: 7.1 ## { 'union': 'DisplayUpdateOptions', 'base': {'type': 'DisplayUpdateType'}, 'discriminator': 'type', 'data': { 'vnc': 'DisplayUpdateOptionsVNC' } } ## # @display-update: # # Update display configuration. # # Since: 7.1 # # .. qmp-example:: # # -> { "execute": "display-update", # "arguments": { "type": "vnc", "addresses": # [ { "type": "inet", "host": "0.0.0.0", # "port": "5901" } ] } } # <- { "return": {} } ## { 'command': 'display-update', 'data': 'DisplayUpdateOptions', 'boxed' : true } ## # @client_migrate_info: # # Set migration information for remote display. This makes the server # ask the client to automatically reconnect using the new parameters # once migration finished successfully. Only implemented for SPICE. # # @protocol: must be "spice" # # @hostname: migration target hostname # # @port: spice tcp port for plaintext channels # # @tls-port: spice tcp port for tls-secured channels # # @cert-subject: server certificate subject # # Since: 0.14 # # .. qmp-example:: # # -> { "execute": "client_migrate_info", # "arguments": { "protocol": "spice", # "hostname": "virt42.lab.kraxel.org", # "port": 1234 } } # <- { "return": {} } ## { 'command': 'client_migrate_info', 'data': { 'protocol': 'str', 'hostname': 'str', '*port': 'int', '*tls-port': 'int', '*cert-subject': 'str' } }