summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJoel Challis <git@zvecr.com>2023-01-28 20:40:47 +0000
committerGitHub <noreply@github.com>2023-01-29 07:40:47 +1100
commit832479c7fbc544a3e8b305af7df9996fa3c5ba00 (patch)
treeb8dde1a4838cd2365ff7e131f2814e341f818625
parentb7274343913eb3e019f0dc08fa8f7774165e787d (diff)
Split out mcu_selection to platform (#19701)
-rw-r--r--builddefs/build_keyboard.mk3
-rw-r--r--builddefs/mcu_selection.mk921
-rw-r--r--platforms/avr/mcu_selection.mk95
-rw-r--r--platforms/chibios/mcu_selection.mk825
4 files changed, 922 insertions, 922 deletions
diff --git a/builddefs/build_keyboard.mk b/builddefs/build_keyboard.mk
index 6d355c9b85..def0be69b6 100644
--- a/builddefs/build_keyboard.mk
+++ b/builddefs/build_keyboard.mk
@@ -182,7 +182,8 @@ endif
include $(BUILDDEFS_PATH)/converters.mk
-include $(BUILDDEFS_PATH)/mcu_selection.mk
+MCU_ORIG := $(MCU)
+include $(wildcard $(PLATFORM_PATH)/*/mcu_selection.mk)
# PLATFORM_KEY should be detected in info.json via key 'processor' (or rules.mk 'MCU')
ifeq ($(PLATFORM_KEY),)
diff --git a/builddefs/mcu_selection.mk b/builddefs/mcu_selection.mk
index 1d05902fab..139597f9cb 100644
--- a/builddefs/mcu_selection.mk
+++ b/builddefs/mcu_selection.mk
@@ -1,923 +1,2 @@
-MCU_ORIG := $(MCU)
-ifneq ($(findstring MKL26Z64, $(MCU)),)
- # Cortex version
- MCU = cortex-m0plus
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 6
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = KINETIS
- MCU_SERIES = KL2x
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= MKL26Z64
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= kl2x
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= PJRC_TEENSY_LC
-endif
-
-ifneq ($(findstring MK20DX128, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = KINETIS
- MCU_SERIES = K20x
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= MK20DX128
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= k20x5
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= PJRC_TEENSY_3
-endif
-
-ifneq ($(findstring MK20DX256, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = KINETIS
- MCU_SERIES = K20x
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= MK20DX256
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= k20x7
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= PJRC_TEENSY_3_1
-endif
-
-ifneq ($(findstring MK64FX512, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = KINETIS
- MCU_SERIES = K60x
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= MK64FX512
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= k60x
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= PJRC_TEENSY_3_5
-endif
-
-ifneq ($(findstring MK66FX1M0, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = KINETIS
- MCU_SERIES = MK66F18
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= MK66FX1M0
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= MK66F18
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= PJRC_TEENSY_3_6
-endif
-
-ifneq ($(findstring RP2040, $(MCU)),)
- # Cortex version
- MCU = cortex-m0plus
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- CHIBIOS_PORT = ARMv6-M-RP2
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = RP
- MCU_SERIES = RP2040
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- STARTUPLD_CONTRIB = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld
- MCU_LDSCRIPT ?= RP2040_FLASH_TIMECRIT
- LDFLAGS += -L $(STARTUPLD_CONTRIB)
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= rp2040
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_PROMICRO_RP2040
-
- # Default UF2 Bootloader settings
- UF2_FAMILY ?= RP2040
- FIRMWARE_FORMAT ?= uf2
-endif
-
-ifneq ($(findstring STM32F042, $(MCU)),)
- # Cortex version
- MCU = cortex-m0
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 6
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F0xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32F042x6
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f0xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F042X6
-
- USE_FPU ?= no
-
- # UF2 settings
- UF2_FAMILY ?= STM32F0
-
- # Stack sizes: Since this chip has limited RAM capacity, the stack area needs to be reduced.
- # This ensures that the EEPROM page buffer fits into RAM
- USE_PROCESS_STACKSIZE = 0x600
- USE_EXCEPTIONS_STACKSIZE = 0x300
-
- # Bootloader address for STM32 DFU
- STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC400
-endif
-
-ifneq ($(findstring STM32F072, $(MCU)),)
- # Cortex version
- MCU = cortex-m0
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 6
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F0xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32F072xB
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f0xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F072XB
-
- USE_FPU ?= no
-
- # UF2 settings
- UF2_FAMILY ?= STM32F0
-
- # Bootloader address for STM32 DFU
- STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC800
-endif
-
-ifneq ($(findstring STM32F103, $(MCU)),)
- # Cortex version
- MCU = cortex-m3
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F1xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- ifeq ($(strip $(BOOTLOADER)), uf2boot)
- MCU_LDSCRIPT ?= STM32F103xB_uf2boot
- else
- MCU_LDSCRIPT ?= STM32F103x8
- endif
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f1xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F103
-
- USE_FPU ?= no
-
- # UF2 settings
- UF2_FAMILY ?= STM32F1
-endif
-
-ifneq ($(findstring STM32F303, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F3xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- ifeq ($(strip $(BOOTLOADER)), tinyuf2)
- MCU_LDSCRIPT ?= STM32F303xC_tinyuf2
- else
- MCU_LDSCRIPT ?= STM32F303xC
- endif
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f3xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F303XC
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32F3
-
- # Bootloader address for STM32 DFU
- STM32_BOOTLOADER_ADDRESS ?= 0x1FFFD800
-endif
-
-ifneq ($(findstring STM32F401, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- ifeq ($(strip $(BOOTLOADER)), tinyuf2)
- MCU_LDSCRIPT ?= STM32F401xC_tinyuf2
- else
- MCU_LDSCRIPT ?= STM32F401xC
- endif
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F401XC
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32F4
-
- # Bootloader address for STM32 DFU
- STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
-
- # Revert to legacy wear-leveling driver until ChibiOS's EFL driver is fixed with 128kB and 384kB variants.
- EEPROM_DRIVER ?= wear_leveling
- WEAR_LEVELING_DRIVER ?= legacy
-endif
-
-ifneq ($(findstring STM32F405, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32F405xG
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F405XG
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32F4
-
- # Bootloader address for STM32 DFU
- STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
-endif
-
-ifneq ($(findstring STM32F407, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32F407xE
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F407XE
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32F4
-
- # Bootloader address for STM32 DFU
- STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
-endif
-
-ifneq ($(findstring STM32F411, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- ifeq ($(strip $(BOOTLOADER)), tinyuf2)
- MCU_LDSCRIPT ?= STM32F411xE_tinyuf2
- else
- MCU_LDSCRIPT ?= STM32F411xE
- endif
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F411XE
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32F4
-
- # Bootloader address for STM32 DFU
- STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
-endif
-
-ifneq ($(findstring STM32F446, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32F446xE
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F446XE
-
- USE_FPU ?= yes
-
- # Bootloader address for STM32 DFU
- STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
-
- # Default as no chibios efl config
- EEPROM_DRIVER ?= transient
-endif
-
-ifneq ($(findstring STM32G431, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32G4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32G431xB
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32g4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_G431XB
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32G4
-
- # Bootloader address for STM32 DFU
- STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
-endif
-
-ifneq ($(findstring STM32G474, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32G4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32G474xE
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32g4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_G474XE
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32G4
-
- # Bootloader address for STM32 DFU
- STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
-endif
-
-ifneq (,$(filter $(MCU),STM32L432 STM32L442))
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32L4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32L432xC
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32l4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_L432XC
-
- PLATFORM_NAME ?= platform_l432
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32L4
-
- # Bootloader address for STM32 DFU
- STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
-endif
-
-ifneq (,$(filter $(MCU),STM32L433 STM32L443))
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32L4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32L432xC
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32l4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_L433XC
-
- PLATFORM_NAME ?= platform_l432
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32L4
-
- # Bootloader address for STM32 DFU
- STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
-endif
-
-ifneq (,$(filter $(MCU),STM32L412 STM32L422))
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32L4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32L412xB
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32l4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_L412XB
-
- PLATFORM_NAME ?= platform_l412_l422
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32L4
-
- # Bootloader address for STM32 DFU
- STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
-endif
-
-ifneq ($(findstring WB32F3G71, $(MCU)),)
- # Cortex version
- MCU = cortex-m3
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = WB32
- MCU_SERIES = WB32F3G71xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= WB32F3G71x9
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= wb32f3g71xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_WB32_F3G71XX
-
- USE_FPU ?= no
-
- # Bootloader address for WB32 DFU
- WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000
-endif
-
-ifneq ($(findstring WB32FQ95, $(MCU)),)
- # Cortex version
- MCU = cortex-m3
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = WB32
- MCU_SERIES = WB32FQ95xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= WB32FQ95xB
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= wb32fq95xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_WB32_FQ95XX
-
- USE_FPU ?= no
-
- # Bootloader address for WB32 DFU
- WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000
-endif
-
-ifneq ($(findstring GD32VF103, $(MCU)),)
- # RISC-V
- MCU = risc-v
-
- # RISC-V extensions and abi configuration
- MCU_ARCH = rv32imac
- MCU_ABI = ilp32
- MCU_CMODEL = medlow
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
- # OR
- # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_PORT_NAME = GD
- MCU_FAMILY = GD32V
- MCU_SERIES = GD32VF103
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/RISCV-ECLIC/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= GD32VF103xB
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/RISCV-ECLIC/compilers/GCC/mk/
- MCU_STARTUP ?= gd32vf103
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= SIPEED_LONGAN_NANO
-
- USE_FPU ?= no
-endif
-
-ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287))
- PROTOCOL = LUFA
-
- # Processor frequency.
- # This will define a symbol, F_CPU, in all source code files equal to the
- # processor frequency in Hz. You can then use this symbol in your source code to
- # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
- # automatically to create a 32-bit value in your source code.
- #
- # This will be an integer division of F_USB below, as it is sourced by
- # F_USB after it has run through any CPU prescalers. Note that this value
- # does not *change* the processor frequency - it should merely be updated to
- # reflect the processor speed set externally so that the code can use accurate
- # software delays.
- F_CPU ?= 16000000
-
- # LUFA specific
- #
- # Target architecture (see library "Board Types" documentation).
- ARCH = AVR8
-
- # Input clock frequency.
- # This will define a symbol, F_USB, in all source code files equal to the
- # input clock frequency (before any prescaling is performed) in Hz. This value may
- # differ from F_CPU if prescaling is used on the latter, and is required as the
- # raw input clock is fed directly to the PLL sections of the AVR for high speed
- # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
- # at the end, this will be done automatically to create a 32-bit value in your
- # source code.
- #
- # If no clock division is performed on the input clock inside the AVR (via the
- # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
- F_USB ?= $(F_CPU)
-
- # Interrupt driven control endpoint task
- ifeq (,$(filter $(NO_INTERRUPT_CONTROL_ENDPOINT),yes))
- OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
- endif
- ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2))
- NO_I2C = yes
- endif
-endif
-
-ifneq (,$(filter $(MCU),atmega32a))
- # MCU name for avrdude
- AVRDUDE_MCU = m32
-
- PROTOCOL = VUSB
-
- # Processor frequency.
- # This will define a symbol, F_CPU, in all source code files equal to the
- # processor frequency in Hz. You can then use this symbol in your source code to
- # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
- # automatically to create a 32-bit value in your source code.
- F_CPU ?= 12000000
-endif
-
-ifneq (,$(filter $(MCU),atmega328p))
- # MCU name for avrdude
- AVRDUDE_MCU = m328p
-
- PROTOCOL = VUSB
-
- # Processor frequency.
- # This will define a symbol, F_CPU, in all source code files equal to the
- # processor frequency in Hz. You can then use this symbol in your source code to
- # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
- # automatically to create a 32-bit value in your source code.
- F_CPU ?= 16000000
-endif
-
-ifneq (,$(filter $(MCU),atmega328))
- # MCU name for avrdude
- AVRDUDE_MCU = m328
-
- PROTOCOL = VUSB
-
- # Processor frequency.
- # This will define a symbol, F_CPU, in all source code files equal to the
- # processor frequency in Hz. You can then use this symbol in your source code to
- # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
- # automatically to create a 32-bit value in your source code.
- F_CPU ?= 16000000
-endif
-
-ifneq (,$(filter $(MCU),attiny85))
- PROTOCOL = VUSB
-
- # Processor frequency.
- # This will define a symbol, F_CPU, in all source code files equal to the
- # processor frequency in Hz. You can then use this symbol in your source code to
- # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
- # automatically to create a 32-bit value in your source code.
- F_CPU ?= 16500000
-endif
diff --git a/platforms/avr/mcu_selection.mk b/platforms/avr/mcu_selection.mk
new file mode 100644
index 0000000000..c49818fbfb
--- /dev/null
+++ b/platforms/avr/mcu_selection.mk
@@ -0,0 +1,95 @@
+ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287))
+ PROTOCOL = LUFA
+
+ # Processor frequency.
+ # This will define a symbol, F_CPU, in all source code files equal to the
+ # processor frequency in Hz. You can then use this symbol in your source code to
+ # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+ # automatically to create a 32-bit value in your source code.
+ #
+ # This will be an integer division of F_USB below, as it is sourced by
+ # F_USB after it has run through any CPU prescalers. Note that this value
+ # does not *change* the processor frequency - it should merely be updated to
+ # reflect the processor speed set externally so that the code can use accurate
+ # software delays.
+ F_CPU ?= 16000000
+
+ # LUFA specific
+ #
+ # Target architecture (see library "Board Types" documentation).
+ ARCH = AVR8
+
+ # Input clock frequency.
+ # This will define a symbol, F_USB, in all source code files equal to the
+ # input clock frequency (before any prescaling is performed) in Hz. This value may
+ # differ from F_CPU if prescaling is used on the latter, and is required as the
+ # raw input clock is fed directly to the PLL sections of the AVR for high speed
+ # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+ # at the end, this will be done automatically to create a 32-bit value in your
+ # source code.
+ #
+ # If no clock division is performed on the input clock inside the AVR (via the
+ # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+ F_USB ?= $(F_CPU)
+
+ # Interrupt driven control endpoint task
+ ifeq (,$(filter $(NO_INTERRUPT_CONTROL_ENDPOINT),yes))
+ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+ endif
+ ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2))
+ NO_I2C = yes
+ endif
+endif
+
+ifneq (,$(filter $(MCU),atmega32a))
+ # MCU name for avrdude
+ AVRDUDE_MCU = m32
+
+ PROTOCOL = VUSB
+
+ # Processor frequency.
+ # This will define a symbol, F_CPU, in all source code files equal to the
+ # processor frequency in Hz. You can then use this symbol in your source code to
+ # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+ # automatically to create a 32-bit value in your source code.
+ F_CPU ?= 12000000
+endif
+
+ifneq (,$(filter $(MCU),atmega328p))
+ # MCU name for avrdude
+ AVRDUDE_MCU = m328p
+
+ PROTOCOL = VUSB
+
+ # Processor frequency.
+ # This will define a symbol, F_CPU, in all source code files equal to the
+ # processor frequency in Hz. You can then use this symbol in your source code to
+ # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+ # automatically to create a 32-bit value in your source code.
+ F_CPU ?= 16000000
+endif
+
+ifneq (,$(filter $(MCU),atmega328))
+ # MCU name for avrdude
+ AVRDUDE_MCU = m328
+
+ PROTOCOL = VUSB
+
+ # Processor frequency.
+ # This will define a symbol, F_CPU, in all source code files equal to the
+ # processor frequency in Hz. You can then use this symbol in your source code to
+ # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+ # automatically to create a 32-bit value in your source code.
+ F_CPU ?= 16000000
+endif
+
+ifneq (,$(filter $(MCU),attiny85))
+ PROTOCOL = VUSB
+
+ # Processor frequency.
+ # This will define a symbol, F_CPU, in all source code files equal to the
+ # processor frequency in Hz. You can then use this symbol in your source code to
+ # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+ # automatically to create a 32-bit value in your source code.
+ F_CPU ?= 16500000
+endif
diff --git a/platforms/chibios/mcu_selection.mk b/platforms/chibios/mcu_selection.mk
new file mode 100644
index 0000000000..6b6488466b
--- /dev/null
+++ b/platforms/chibios/mcu_selection.mk
@@ -0,0 +1,825 @@
+ifneq ($(findstring MKL26Z64, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m0plus
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 6
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = KINETIS
+ MCU_SERIES = KL2x
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= MKL26Z64
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= kl2x
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= PJRC_TEENSY_LC
+endif
+
+ifneq ($(findstring MK20DX128, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = KINETIS
+ MCU_SERIES = K20x
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= MK20DX128
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= k20x5
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= PJRC_TEENSY_3
+endif
+
+ifneq ($(findstring MK20DX256, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = KINETIS
+ MCU_SERIES = K20x
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= MK20DX256
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= k20x7
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= PJRC_TEENSY_3_1
+endif
+
+ifneq ($(findstring MK64FX512, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = KINETIS
+ MCU_SERIES = K60x
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= MK64FX512
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= k60x
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= PJRC_TEENSY_3_5
+endif
+
+ifneq ($(findstring MK66FX1M0, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = KINETIS
+ MCU_SERIES = MK66F18
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= MK66FX1M0
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= MK66F18
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= PJRC_TEENSY_3_6
+endif
+
+ifneq ($(findstring RP2040, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m0plus
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ CHIBIOS_PORT = ARMv6-M-RP2
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = RP
+ MCU_SERIES = RP2040
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ STARTUPLD_CONTRIB = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld
+ MCU_LDSCRIPT ?= RP2040_FLASH_TIMECRIT
+ LDFLAGS += -L $(STARTUPLD_CONTRIB)
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= rp2040
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_PROMICRO_RP2040
+
+ # Default UF2 Bootloader settings
+ UF2_FAMILY ?= RP2040
+ FIRMWARE_FORMAT ?= uf2
+endif
+
+ifneq ($(findstring STM32F042, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m0
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 6
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F0xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32F042x6
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f0xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F042X6
+
+ USE_FPU ?= no
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F0
+
+ # Stack sizes: Since this chip has limited RAM capacity, the stack area needs to be reduced.
+ # This ensures that the EEPROM page buffer fits into RAM
+ USE_PROCESS_STACKSIZE = 0x600
+ USE_EXCEPTIONS_STACKSIZE = 0x300
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC400
+endif
+
+ifneq ($(findstring STM32F072, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m0
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 6
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F0xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32F072xB
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f0xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F072XB
+
+ USE_FPU ?= no
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F0
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC800
+endif
+
+ifneq ($(findstring STM32F103, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m3
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F1xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ ifeq ($(strip $(BOOTLOADER)), uf2boot)
+ MCU_LDSCRIPT ?= STM32F103xB_uf2boot
+ else
+ MCU_LDSCRIPT ?= STM32F103x8
+ endif
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f1xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F103
+
+ USE_FPU ?= no
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F1
+endif
+
+ifneq ($(findstring STM32F303, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F3xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ ifeq ($(strip $(BOOTLOADER)), tinyuf2)
+ MCU_LDSCRIPT ?= STM32F303xC_tinyuf2
+ else
+ MCU_LDSCRIPT ?= STM32F303xC
+ endif
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f3xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F303XC
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F3
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFFD800
+endif
+
+ifneq ($(findstring STM32F401, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ ifeq ($(strip $(BOOTLOADER)), tinyuf2)
+ MCU_LDSCRIPT ?= STM32F401xC_tinyuf2
+ else
+ MCU_LDSCRIPT ?= STM32F401xC
+ endif
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F401XC
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+
+ # Revert to legacy wear-leveling driver until ChibiOS's EFL driver is fixed with 128kB and 384kB variants.
+ EEPROM_DRIVER ?= wear_leveling
+ WEAR_LEVELING_DRIVER ?= legacy
+endif
+
+ifneq ($(findstring STM32F405, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32F405xG
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F405XG
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq ($(findstring STM32F407, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32F407xE
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F407XE
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq ($(findstring STM32F411, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ ifeq ($(strip $(BOOTLOADER)), tinyuf2)
+ MCU_LDSCRIPT ?= STM32F411xE_tinyuf2
+ else
+ MCU_LDSCRIPT ?= STM32F411xE
+ endif
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F411XE
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq ($(findstring STM32F446, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32F446xE
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F446XE
+
+ USE_FPU ?= yes
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+
+ # Default as no chibios efl config
+ EEPROM_DRIVER ?= transient
+endif
+
+ifneq ($(findstring STM32G431, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32G4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32G431xB
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32g4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_G431XB
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32G4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq ($(findstring STM32G474, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32G4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32G474xE
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32g4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_G474XE
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32G4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq (,$(filter $(MCU),STM32L432 STM32L442))
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32L4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32L432xC
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32l4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_L432XC
+
+ PLATFORM_NAME ?= platform_l432
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32L4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq (,$(filter $(MCU),STM32L433 STM32L443))
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32L4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32L432xC
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32l4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_L433XC
+
+ PLATFORM_NAME ?= platform_l432
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32L4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq (,$(filter $(MCU),STM32L412 STM32L422))
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32L4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32L412xB
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32l4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_L412XB
+
+ PLATFORM_NAME ?= platform_l412_l422
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32L4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq ($(findstring WB32F3G71, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m3
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = WB32
+ MCU_SERIES = WB32F3G71xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= WB32F3G71x9
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= wb32f3g71xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_WB32_F3G71XX
+
+ USE_FPU ?= no
+
+ # Bootloader address for WB32 DFU
+ WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000
+endif
+
+ifneq ($(findstring WB32FQ95, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m3
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = WB32
+ MCU_SERIES = WB32FQ95xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= WB32FQ95xB
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= wb32fq95xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_WB32_FQ95XX
+
+ USE_FPU ?= no
+
+ # Bootloader address for WB32 DFU
+ WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000
+endif
+
+ifneq ($(findstring GD32VF103, $(MCU)),)
+ # RISC-V
+ MCU = risc-v
+
+ # RISC-V extensions and abi configuration
+ MCU_ARCH = rv32imac
+ MCU_ABI = ilp32
+ MCU_CMODEL = medlow
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_PORT_NAME = GD
+ MCU_FAMILY = GD32V
+ MCU_SERIES = GD32VF103
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/RISCV-ECLIC/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= GD32VF103xB
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/RISCV-ECLIC/compilers/GCC/mk/
+ MCU_STARTUP ?= gd32vf103
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= SIPEED_LONGAN_NANO
+
+ USE_FPU ?= no
+endif