Skip some of the non-critical tests in ./tools/run_flash_bench.sh

Summary:
Some of the tests aren't considered to be critical when it comes to getting key benchmarking data for RocksDB. Therefore we'll introduce an environment variable `SKIP_LOW_PRI_TESTS` which enables skipping those test cases. By default all the tests will be run. If you want to optimize the test-case execution then do the following:

`
$ export SKIP_LOW_PRI_TESTS=1
$ ./tools/run_flash_bench.sh
`

Test Plan: Verified that when  `SKIP_LOW_PRI_TESTS` is not set then `benchmark.sh` is called for all the scenarios and when `SKIP_LOW_PRI_TESTS` is set to `1` then `benchmark.sh` is called only for the test-cases which are critical.

Reviewers: MarkCallaghan

Reviewed By: MarkCallaghan

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D53739

1 files changed, 91 insertions, 40 deletions

diff --git a/tools/run_flash_bench.sh b/tools/run_flash_bench.sh
index 1f59a5ada..c24b0f5eb 100755
--- a/tools/run_flash_bench.sh
+++ b/tools/run_flash_bench.sh
@@ -22,6 +22,7 @@
 # test and the tests are listed below.
 #
 # The environment variables are also optional. The variables are:
+#
 #   NKEYS         - number of key/value pairs to load
 #   BG_MBWRITEPERSEC - write rate limit in MB/second for tests in which
 #                   there is one thread doing writes and stats are
@@ -54,6 +55,10 @@
 #   SAVE_SETUP    - saves a copy of the database at the end of step 1 to
 #                   $DATA_DIR.bak. When LOG_DIR != DATA_DIR then it is copied
 #                   to $LOG_DIR.bak.
+#   SKIP_LOW_PRI_TESTS - skip some of the tests which aren't crucial for getting
+#                   actionable benchmarking data (look for keywords "bulkload",
+#                   "sync=1", and "while merging").
+#
 
 # Size constants
 K=1024
@@ -89,6 +94,14 @@ wal_dir=${LOG_DIR:-"/tmp/rocksdb/"}
 do_setup=${DO_SETUP:-1}
 save_setup=${SAVE_SETUP:-0}
 
+# By default we'll run all the tests. Set this to skip a set of tests which
+# aren't critical for getting key metrics.
+skip_low_pri_tests=${SKIP_LOW_PRI_TESTS:-0}
+
+if [[ $skip_low_pri_tests == 1 ]]; then
+  echo "Skipping some non-critical tests because SKIP_LOW_PRI_TESTS is set."
+fi
+
 output_dir="/tmp/output"
 
 ARGS="\
@@ -116,8 +129,10 @@ echo -e "ops/sec\tmb/sec\tSize-GB\tL0_GB\tSum_GB\tW-Amp\tW-MB/s\tusec/op\tp50\tp
 if [[ $do_setup != 0 ]]; then
   echo Doing setup
 
-  # Test 1: bulk load
-  env $ARGS ./tools/benchmark.sh bulkload
+  if [[ $skip_low_pri_tests != 1 ]]; then
+    # Test 1: bulk load
+    env $ARGS ./tools/benchmark.sh bulkload
+  fi
 
   # Test 2a: sequential fill with large values to get peak ingest
   #          adjust NUM_KEYS given the use of larger values
@@ -188,16 +203,20 @@ for num_thr in "${nthreads[@]}" ; do
   env $ARGS DURATION=$duration NUM_THREADS=$num_thr MB_WRITE_PER_SEC=$fg_mbwps \
     DB_BENCH_NO_SYNC=1 ./tools/benchmark.sh overwrite
 
-  # Test 8: overwrite with sync=1
-  env $ARGS DURATION=$duration NUM_THREADS=$num_thr MB_WRITE_PER_SEC=$fg_mbwps \
-    ./tools/benchmark.sh overwrite
+  if [[ $skip_low_pri_tests != 1 ]]; then
+    # Test 8: overwrite with sync=1
+    env $ARGS DURATION=$duration NUM_THREADS=$num_thr MB_WRITE_PER_SEC=$fg_mbwps \
+      ./tools/benchmark.sh overwrite
+  fi
 
   # Test 9: random update with sync=0
   env $ARGS DURATION=$duration NUM_THREADS=$num_thr DB_BENCH_NO_SYNC=1 \
       ./tools/benchmark.sh updaterandom
 
-  # Test 10: random update with sync=1
-  env $ARGS DURATION=$duration NUM_THREADS=$num_thr ./tools/benchmark.sh updaterandom
+  if [[ $skip_low_pri_tests != 1 ]]; then
+    # Test 10: random update with sync=1
+   env $ARGS DURATION=$duration NUM_THREADS=$num_thr ./tools/benchmark.sh updaterandom
+  fi
 
   # Test 11: random read while writing
   env $ARGS DURATION=$duration NUM_THREADS=$num_thr MB_WRITE_PER_SEC=$bg_mbwps \
@@ -219,73 +238,105 @@ for num_thr in "${nthreads[@]}" ; do
   env $ARGS DURATION=$duration NUM_THREADS=$num_thr MB_WRITE_PER_SEC=$fg_mbwps \
     DB_BENCH_NO_SYNC=1 ./tools/benchmark.sh mergerandom
 
-  # Test 15: random merge with sync=1
-  env $ARGS DURATION=$duration NUM_THREADS=$num_thr MB_WRITE_PER_SEC=$fg_mbwps \
-    ./tools/benchmark.sh mergerandom
+  if [[ $skip_low_pri_tests != 1 ]]; then
+    # Test 15: random merge with sync=1
+    env $ARGS DURATION=$duration NUM_THREADS=$num_thr MB_WRITE_PER_SEC=$fg_mbwps \
+      ./tools/benchmark.sh mergerandom
 
-  # Test 16: random read while merging 
-  env $ARGS DURATION=$duration NUM_THREADS=$num_thr MB_WRITE_PER_SEC=$bg_mbwps \
-    DB_BENCH_NO_SYNC=1 ./tools/benchmark.sh readwhilemerging
+    # Test 16: random read while merging 
+    env $ARGS DURATION=$duration NUM_THREADS=$num_thr MB_WRITE_PER_SEC=$bg_mbwps \
+      DB_BENCH_NO_SYNC=1 ./tools/benchmark.sh readwhilemerging
 
-  # Test 17: range scan while merging 
-  env $ARGS DURATION=$duration NUM_THREADS=$num_thr MB_WRITE_PER_SEC=$bg_mbwps \
-    DB_BENCH_NO_SYNC=1 NUM_NEXTS_PER_SEEK=$nps ./tools/benchmark.sh fwdrangewhilemerging
+    # Test 17: range scan while merging 
+    env $ARGS DURATION=$duration NUM_THREADS=$num_thr MB_WRITE_PER_SEC=$bg_mbwps \
+      DB_BENCH_NO_SYNC=1 NUM_NEXTS_PER_SEEK=$nps ./tools/benchmark.sh fwdrangewhilemerging
 
-  # Test 18: reverse range scan while merging 
-  env $ARGS DURATION=$duration NUM_THREADS=$num_thr MB_WRITE_PER_SEC=$bg_mbwps \
-    DB_BENCH_NO_SYNC=1 NUM_NEXTS_PER_SEEK=$nps ./tools/benchmark.sh revrangewhilemerging
+    # Test 18: reverse range scan while merging 
+    env $ARGS DURATION=$duration NUM_THREADS=$num_thr MB_WRITE_PER_SEC=$bg_mbwps \
+      DB_BENCH_NO_SYNC=1 NUM_NEXTS_PER_SEEK=$nps ./tools/benchmark.sh revrangewhilemerging
+  fi
 done
 
-echo bulkload > $output_dir/report2.txt
-head -1 $output_dir/report.txt >> $output_dir/report2.txt
-grep bulkload $output_dir/report.txt >> $output_dir/report2.txt
+if [[ $skip_low_pri_tests != 1 ]]; then
+  echo bulkload > $output_dir/report2.txt
+  head -1 $output_dir/report.txt >> $output_dir/report2.txt
+  grep bulkload $output_dir/report.txt >> $output_dir/report2.txt
+fi
+
 echo fillseq >> $output_dir/report2.txt
 head -1 $output_dir/report.txt >> $output_dir/report2.txt
 grep fillseq $output_dir/report.txt >> $output_dir/report2.txt
+
 echo overwrite sync=0 >> $output_dir/report2.txt
 head -1 $output_dir/report.txt >> $output_dir/report2.txt
 grep overwrite $output_dir/report.txt | grep \.s0  >> $output_dir/report2.txt
-echo overwrite sync=1 >> $output_dir/report2.txt
-head -1 $output_dir/report.txt >> $output_dir/report2.txt
-grep overwrite $output_dir/report.txt | grep \.s1  >> $output_dir/report2.txt
+
+if [[ $skip_low_pri_tests != 1 ]]; then
+  echo overwrite sync=1 >> $output_dir/report2.txt
+  head -1 $output_dir/report.txt >> $output_dir/report2.txt
+  grep overwrite $output_dir/report.txt | grep \.s1  >> $output_dir/report2.txt
+fi
+
 echo updaterandom sync=0 >> $output_dir/report2.txt
 head -1 $output_dir/report.txt >> $output_dir/report2.txt
 grep updaterandom $output_dir/report.txt | grep \.s0 >> $output_dir/report2.txt
-echo updaterandom sync=1 >> $output_dir/report2.txt
-head -1 $output_dir/report.txt >> $output_dir/report2.txt
-grep updaterandom $output_dir/report.txt | grep \.s1 >> $output_dir/report2.txt
+
+if [[ $skip_low_pri_tests != 1 ]]; then
+  echo updaterandom sync=1 >> $output_dir/report2.txt
+  head -1 $output_dir/report.txt >> $output_dir/report2.txt
+  grep updaterandom $output_dir/report.txt | grep \.s1 >> $output_dir/report2.txt
+fi
+
 echo mergerandom sync=0 >> $output_dir/report2.txt
 head -1 $output_dir/report.txt >> $output_dir/report2.txt
 grep mergerandom $output_dir/report.txt | grep \.s0 >> $output_dir/report2.txt
-echo mergerandom sync=1 >> $output_dir/report2.txt
-head -1 $output_dir/report.txt >> $output_dir/report2.txt
-grep mergerandom $output_dir/report.txt | grep \.s1 >> $output_dir/report2.txt
+
+if [[ $skip_low_pri_tests != 1 ]]; then
+  echo mergerandom sync=1 >> $output_dir/report2.txt
+  head -1 $output_dir/report.txt >> $output_dir/report2.txt
+  grep mergerandom $output_dir/report.txt | grep \.s1 >> $output_dir/report2.txt
+fi
+
 echo readrandom >> $output_dir/report2.txt
 head -1 $output_dir/report.txt >> $output_dir/report2.txt
 grep readrandom $output_dir/report.txt  >> $output_dir/report2.txt
+
 echo fwdrange >> $output_dir/report2.txt
 head -1 $output_dir/report.txt >> $output_dir/report2.txt
 grep fwdrange\.t $output_dir/report.txt >> $output_dir/report2.txt
+
 echo revrange >> $output_dir/report2.txt
 head -1 $output_dir/report.txt >> $output_dir/report2.txt
 grep revrange\.t $output_dir/report.txt >> $output_dir/report2.txt
+
 echo readwhile >> $output_dir/report2.txt >> $output_dir/report2.txt
 head -1 $output_dir/report.txt >> $output_dir/report2.txt
 grep readwhilewriting $output_dir/report.txt >> $output_dir/report2.txt
-echo readwhile >> $output_dir/report2.txt
-head -1 $output_dir/report.txt >> $output_dir/report2.txt
-grep readwhilemerging $output_dir/report.txt >> $output_dir/report2.txt
+
+if [[ $skip_low_pri_tests != 1 ]]; then
+  echo readwhile >> $output_dir/report2.txt
+  head -1 $output_dir/report.txt >> $output_dir/report2.txt
+  grep readwhilemerging $output_dir/report.txt >> $output_dir/report2.txt
+fi
+
 echo fwdreadwhilewriting >> $output_dir/report2.txt
 head -1 $output_dir/report.txt >> $output_dir/report2.txt
 grep fwdrangewhilewriting $output_dir/report.txt >> $output_dir/report2.txt
-echo fwdreadwhilemerging >> $output_dir/report2.txt
-head -1 $output_dir/report.txt >> $output_dir/report2.txt
-grep fwdrangewhilemerg $output_dir/report.txt >> $output_dir/report2.txt
+
+if [[ $skip_low_pri_tests != 1 ]]; then
+  echo fwdreadwhilemerging >> $output_dir/report2.txt
+  head -1 $output_dir/report.txt >> $output_dir/report2.txt
+  grep fwdrangewhilemerg $output_dir/report.txt >> $output_dir/report2.txt
+fi
+
 echo revreadwhilewriting >> $output_dir/report2.txt
 head -1 $output_dir/report.txt >> $output_dir/report2.txt
 grep revrangewhilewriting $output_dir/report.txt >> $output_dir/report2.txt
-echo revreadwhilemerging >> $output_dir/report2.txt
-head -1 $output_dir/report.txt >> $output_dir/report2.txt
-grep revrangewhilemerg $output_dir/report.txt >> $output_dir/report2.txt
+
+if [[ $skip_low_pri_tests != 1 ]]; then
+  echo revreadwhilemerging >> $output_dir/report2.txt
+  head -1 $output_dir/report.txt >> $output_dir/report2.txt
+  grep revrangewhilemerg $output_dir/report.txt >> $output_dir/report2.txt
+fi
 
 cat $output_dir/report2.txt