diff options
Diffstat (limited to 'mk/rte.app.mk')
-rw-r--r-- | mk/rte.app.mk | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/mk/rte.app.mk b/mk/rte.app.mk new file mode 100644 index 0000000000..019e7c35fa --- /dev/null +++ b/mk/rte.app.mk @@ -0,0 +1,236 @@ +# BSD LICENSE +# +# Copyright(c) 2010-2012 Intel Corporation. All rights reserved. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Intel Corporation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# version: DPDK.L.1.2.3-3 + +include $(RTE_SDK)/mk/internal/rte.compile-pre.mk +include $(RTE_SDK)/mk/internal/rte.install-pre.mk +include $(RTE_SDK)/mk/internal/rte.clean-pre.mk +include $(RTE_SDK)/mk/internal/rte.build-pre.mk +include $(RTE_SDK)/mk/internal/rte.depdirs-pre.mk + +# VPATH contains at least SRCDIR +VPATH += $(SRCDIR) + +_BUILD = $(APP) +_INSTALL = $(INSTALL-FILES-y) $(SYMLINK-FILES-y) +_INSTALL += $(RTE_OUTPUT)/app/$(APP) $(RTE_OUTPUT)/app/$(APP).map +POSTINSTALL += target-appinstall +_CLEAN = doclean +POSTCLEAN += target-appclean + +ifeq ($(NO_LDSCRIPT),) +LDSCRIPT = $(RTE_LDSCRIPT) +endif + +# default path for libs +LDLIBS += -L$(RTE_SDK_BIN)/lib + +# +# Include libraries depending on config if NO_AUTOLIBS is not set +# Order is important: from higher level to lower level +# +ifeq ($(NO_AUTOLIBS),) + +ifeq ($(CONFIG_RTE_LIBRTE_IGB_PMD),y) +LDLIBS += -lrte_pmd_igb +endif + +ifeq ($(CONFIG_RTE_LIBRTE_IXGBE_PMD),y) +LDLIBS += -lrte_pmd_ixgbe +endif + +ifeq ($(CONFIG_RTE_LIBRTE_MBUF),y) +LDLIBS += -lrte_mbuf +endif + +ifeq ($(CONFIG_RTE_LIBRTE_CMDLINE),y) +LDLIBS += -lrte_cmdline +endif + +ifeq ($(CONFIG_RTE_LIBRTE_TIMER),y) +LDLIBS += -lrte_timer +endif + +ifeq ($(CONFIG_RTE_LIBRTE_HASH),y) +LDLIBS += -lrte_hash +endif + +ifeq ($(CONFIG_RTE_LIBRTE_LPM),y) +LDLIBS += -lrte_lpm +endif + +LDLIBS += --start-group + +ifeq ($(CONFIG_RTE_LIBRTE_ETHER),y) +LDLIBS += -lethdev +endif + +ifeq ($(CONFIG_RTE_LIBRTE_MALLOC),y) +LDLIBS += -lrte_malloc +endif + +ifeq ($(CONFIG_RTE_LIBRTE_MEMPOOL),y) +LDLIBS += -lrte_mempool +endif + +ifeq ($(CONFIG_RTE_LIBRTE_RING),y) +LDLIBS += -lrte_ring +endif + +ifeq ($(CONFIG_RTE_LIBC),y) +LDLIBS += -lc +endif + +ifeq ($(CONFIG_RTE_LIBGLOSS),y) +LDLIBS += -lgloss +endif + +ifeq ($(CONFIG_RTE_LIBRTE_EAL),y) +LDLIBS += -lrte_eal +endif + +LDLIBS += $(EXECENV_LDLIBS) + +LDLIBS += --end-group + +endif # ifeq ($(NO_AUTOLIBS),) + +LDLIBS += $(CPU_LDLIBS) + +.PHONY: all +all: install + +.PHONY: install +install: build _postinstall + +_postinstall: build + +.PHONY: build +build: _postbuild + +exe2cmd = $(strip $(call dotfile,$(patsubst %,%.cmd,$(1)))) + +ifeq ($(LINK_USING_CC),1) +comma := , +LDLIBS := $(addprefix -Wl$(comma),$(LDLIBS)) +LDFLAGS := $(addprefix -Wl$(comma),$(LDFLAGS)) +EXTRA_LDFLAGS := $(addprefix -Wl$(comma),$(EXTRA_LDFLAGS)) +O_TO_EXE = $(CC) $(CFLAGS) $(LDFLAGS_$(@)) \ + -Wl,-Map=$(@).map,--cref -o $@ $(OBJS-y) $(LDFLAGS) $(EXTRA_LDFLAGS) $(LDLIBS) +else +O_TO_EXE = $(LD) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \ + -Map=$(@).map --cref -o $@ $(OBJS-y) $(LDLIBS) +endif +O_TO_EXE_STR = $(subst ','\'',$(O_TO_EXE)) #'# fix syntax highlight +O_TO_EXE_DISP = $(if $(V),"$(O_TO_EXE_STR)"," LD $(@)") +O_TO_EXE_CMD = "cmd_$@ = $(O_TO_EXE_STR)" +O_TO_EXE_DO = @set -e; \ + echo $(O_TO_EXE_DISP); \ + $(O_TO_EXE) && \ + echo $(O_TO_EXE_CMD) > $(call exe2cmd,$(@)) + +-include .$(APP).cmd + +# path where libraries are retrieved +LDLIBS_PATH := $(subst -Wl$(comma)-L,,$(filter -Wl$(comma)-L%,$(LDLIBS))) +LDLIBS_PATH += $(subst -L,,$(filter -L%,$(LDLIBS))) + +# list of .a files that are linked to this application +LDLIBS_NAMES := $(patsubst -l%,lib%.a,$(filter -l%,$(LDLIBS))) +LDLIBS_NAMES += $(patsubst -Wl$(comma)-l%,lib%.a,$(filter -Wl$(comma)-l%,$(LDLIBS))) + +# list of found libraries files (useful for deps). If not found, the +# library is silently ignored and dep won't be checked +LDLIBS_FILES := $(wildcard $(foreach dir,$(LDLIBS_PATH),\ + $(addprefix $(dir)/,$(LDLIBS_NAMES)))) + +# +# Compile executable file if needed +# +$(APP): $(OBJS-y) $(LDLIBS_FILES) $(DEP_$(APP)) $(LDSCRIPT) FORCE + @[ -d $(dir $@) ] || mkdir -p $(dir $@) + $(if $(D),\ + @echo -n "$< -> $@ " ; \ + echo -n "file_missing=$(call boolean,$(file_missing)) " ; \ + echo -n "cmdline_changed=$(call boolean,$(call cmdline_changed,$(O_TO_EXE_STR))) " ; \ + echo -n "depfile_missing=$(call boolean,$(depfile_missing)) " ; \ + echo "depfile_newer=$(call boolean,$(depfile_newer)) ") + $(if $(or \ + $(file_missing),\ + $(call cmdline_changed,$(O_TO_EXE_STR)),\ + $(depfile_missing),\ + $(depfile_newer)),\ + $(O_TO_EXE_DO)) + +# +# install app in $(RTE_OUTPUT)/app +# +$(RTE_OUTPUT)/app/$(APP): $(APP) + @echo " INSTALL-APP $(APP)" + @[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app + $(Q)cp -f $(APP) $(RTE_OUTPUT)/app + +# +# install app map file in $(RTE_OUTPUT)/app +# +$(RTE_OUTPUT)/app/$(APP).map: $(APP) + @echo " INSTALL-MAP $(APP).map" + @[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app + $(Q)cp -f $(APP).map $(RTE_OUTPUT)/app + +# +# Clean all generated files +# +.PHONY: clean +clean: _postclean + $(Q)rm -f $(_BUILD_TARGETS) $(_INSTALL_TARGETS) $(_CLEAN_TARGETS) + +.PHONY: doclean +doclean: + $(Q)rm -rf $(APP) $(OBJS-all) $(DEPS-all) $(DEPSTMP-all) \ + $(CMDS-all) $(INSTALL-FILES-all) .$(APP).cmd + + +include $(RTE_SDK)/mk/internal/rte.compile-post.mk +include $(RTE_SDK)/mk/internal/rte.install-post.mk +include $(RTE_SDK)/mk/internal/rte.clean-post.mk +include $(RTE_SDK)/mk/internal/rte.build-post.mk +include $(RTE_SDK)/mk/internal/rte.depdirs-post.mk + +ifneq ($(wildcard $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk),) +include $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk +else +include $(RTE_SDK)/mk/target/generic/rte.app.mk +endif + +.PHONY: FORCE +FORCE: |