diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
21 files changed, 299 insertions, 59 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml index 1748f1605cc7..7dff32f373cb 100644 --- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml @@ -2,8 +2,8 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/amlogic/amlogic,meson-gx-ao-secure.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/amlogic/amlogic,meson-gx-ao-secure.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson Firmware registers Interface diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml index eee7cda9f91b..09b27e98d4c9 100644 --- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/amlogic/amlogic,meson-mx-secbus2.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/amlogic/amlogic,meson-mx-secbus2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson8/Meson8b/Meson8m2 SECBUS2 register interface diff --git a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml index d4dc0749f9fd..5d033570b57b 100644 --- a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml +++ b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml @@ -28,7 +28,8 @@ properties: maxItems: 1 description: | This interrupt which is used to signal an event by the secure world - software is expected to be edge-triggered. + software is expected to be either a per-cpu interrupt or an + edge-triggered peripheral interrupt. method: enum: [smc, hvc] diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml index 38efcad56dbd..02cc6894eb13 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml @@ -7,8 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Last Level Cache Controller maintainers: - - Rishabh Bhatnagar <rishabhb@codeaurora.org> - - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> + - Bjorn Andersson <andersson@kernel.org> description: | LLCC (Last Level Cache Controller) provides last level of cache memory in SoC, @@ -27,6 +26,7 @@ properties: - qcom,sc8280xp-llcc - qcom,sdm845-llcc - qcom,sm6350-llcc + - qcom,sm7150-llcc - qcom,sm8150-llcc - qcom,sm8250-llcc - qcom,sm8350-llcc @@ -34,14 +34,12 @@ properties: - qcom,sm8550-llcc reg: - items: - - description: LLCC base register region - - description: LLCC broadcast base register region + minItems: 2 + maxItems: 9 reg-names: - items: - - const: llcc_base - - const: llcc_broadcast_base + minItems: 2 + maxItems: 9 interrupts: maxItems: 1 @@ -51,15 +49,120 @@ required: - reg - reg-names +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7180-llcc + - qcom,sm6350-llcc + then: + properties: + reg: + items: + - description: LLCC0 base register region + - description: LLCC broadcast base register region + reg-names: + items: + - const: llcc0_base + - const: llcc_broadcast_base + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-llcc + then: + properties: + reg: + items: + - description: LLCC0 base register region + - description: LLCC1 base register region + - description: LLCC broadcast base register region + reg-names: + items: + - const: llcc0_base + - const: llcc1_base + - const: llcc_broadcast_base + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8180x-llcc + - qcom,sc8280xp-llcc + then: + properties: + reg: + items: + - description: LLCC0 base register region + - description: LLCC1 base register region + - description: LLCC2 base register region + - description: LLCC3 base register region + - description: LLCC4 base register region + - description: LLCC5 base register region + - description: LLCC6 base register region + - description: LLCC7 base register region + - description: LLCC broadcast base register region + reg-names: + items: + - const: llcc0_base + - const: llcc1_base + - const: llcc2_base + - const: llcc3_base + - const: llcc4_base + - const: llcc5_base + - const: llcc6_base + - const: llcc7_base + - const: llcc_broadcast_base + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-llcc + - qcom,sm8150-llcc + - qcom,sm8250-llcc + - qcom,sm8350-llcc + - qcom,sm8450-llcc + then: + properties: + reg: + items: + - description: LLCC0 base register region + - description: LLCC1 base register region + - description: LLCC2 base register region + - description: LLCC3 base register region + - description: LLCC broadcast base register region + reg-names: + items: + - const: llcc0_base + - const: llcc1_base + - const: llcc2_base + - const: llcc3_base + - const: llcc_broadcast_base + additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - system-cache-controller@1100000 { - compatible = "qcom,sdm845-llcc"; - reg = <0x1100000 0x200000>, <0x1300000 0x50000> ; - reg-names = "llcc_base", "llcc_broadcast_base"; - interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + soc { + #address-cells = <2>; + #size-cells = <2>; + + system-cache-controller@1100000 { + compatible = "qcom,sdm845-llcc"; + reg = <0 0x01100000 0 0x50000>, <0 0x01180000 0 0x50000>, + <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>, + <0 0x01300000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; }; diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml new file mode 100644 index 000000000000..92e1d76e29ee --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/qcom,inline-crypto-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. (QTI) Inline Crypto Engine + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +properties: + compatible: + items: + - enum: + - qcom,sm8550-inline-crypto-engine + - const: qcom,inline-crypto-engine + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8550-gcc.h> + + crypto@1d88000 { + compatible = "qcom,sm8550-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0x01d88000 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; +... diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 2f7c51c75e85..5824c43e9893 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -56,17 +56,38 @@ properties: description: Specifies the mailboxes used to communicate with SCMI compliant firmware. - items: - - const: tx - - const: rx + oneOf: + - items: + - const: tx + - const: rx + minItems: 1 + - items: + - const: tx + - const: tx_reply + - const: rx + minItems: 2 mboxes: description: List of phandle and mailbox channel specifiers. It should contain - exactly one or two mailboxes, one for transmitting messages("tx") - and another optional for receiving the notifications("rx") if supported. + exactly one, two or three mailboxes; the first one or two for transmitting + messages ("tx") and another optional ("rx") for receiving notifications + and delayed responses, if supported by the platform. + The number of mailboxes needed for transmitting messages depends on the + type of channels exposed by the specific underlying mailbox controller; + one single channel descriptor is enough if such channel is bidirectional, + while two channel descriptors are needed to represent the SCMI ("tx") + channel if the underlying mailbox channels are of unidirectional type. + The effective combination in numbers of mboxes and shmem descriptors let + the SCMI subsystem determine unambiguosly which type of SCMI channels are + made available by the underlying mailbox controller and how to use them. + 1 mbox / 1 shmem => SCMI TX over 1 mailbox bidirectional channel + 2 mbox / 2 shmem => SCMI TX and RX over 2 mailbox bidirectional channels + 2 mbox / 1 shmem => SCMI TX over 2 mailbox unidirectional channels + 3 mbox / 2 shmem => SCMI TX and RX over 3 mailbox unidirectional channels + Any other combination of mboxes and shmem is invalid. minItems: 1 - maxItems: 2 + maxItems: 3 shmem: description: @@ -228,13 +249,20 @@ $defs: maxItems: 1 mbox-names: - items: - - const: tx - - const: rx + oneOf: + - items: + - const: tx + - const: rx + minItems: 1 + - items: + - const: tx + - const: tx_reply + - const: rx + minItems: 2 mboxes: minItems: 1 - maxItems: 2 + maxItems: 3 shmem: minItems: 1 diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index a66e99812b1f..367d04ad1923 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -24,9 +24,11 @@ properties: - qcom,scm-apq8064 - qcom,scm-apq8084 - qcom,scm-ipq4019 + - qcom,scm-ipq5332 - qcom,scm-ipq6018 - qcom,scm-ipq806x - qcom,scm-ipq8074 + - qcom,scm-ipq9574 - qcom,scm-mdm9607 - qcom,scm-msm8226 - qcom,scm-msm8660 @@ -38,10 +40,12 @@ properties: - qcom,scm-msm8994 - qcom,scm-msm8996 - qcom,scm-msm8998 + - qcom,scm-qcm2290 - qcom,scm-qdu1000 - qcom,scm-sa8775p - qcom,scm-sc7180 - qcom,scm-sc7280 + - qcom,scm-sc8180x - qcom,scm-sc8280xp - qcom,scm-sdm670 - qcom,scm-sdm845 @@ -107,6 +111,7 @@ allOf: - qcom,scm-msm8960 - qcom,scm-msm8974 - qcom,scm-msm8976 + - qcom,scm-qcm2290 - qcom,scm-sm6375 then: required: @@ -125,6 +130,7 @@ allOf: - qcom,scm-apq8064 - qcom,scm-msm8660 - qcom,scm-msm8960 + - qcom,scm-qcm2290 - qcom,scm-sm6375 then: properties: @@ -166,6 +172,7 @@ allOf: compatible: contains: enum: + - qcom,scm-qdu1000 - qcom,scm-sm8450 - qcom,scm-sm8550 then: diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml index a8fda30cccbb..2f36ac23604c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml @@ -43,6 +43,7 @@ properties: - mediatek,mt8195-smi-common-vdo - mediatek,mt8195-smi-common-vpp - mediatek,mt8195-smi-sub-common + - mediatek,mt8365-smi-common - description: for mt7623 items: @@ -133,6 +134,7 @@ allOf: - mediatek,mt8192-smi-common - mediatek,mt8195-smi-common-vdo - mediatek,mt8195-smi-common-vpp + - mediatek,mt8365-smi-common then: properties: diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml index 5f4ac3609887..aee7f6cf1300 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml @@ -34,6 +34,10 @@ properties: - const: mediatek,mt7623-smi-larb - const: mediatek,mt2701-smi-larb + - items: + - const: mediatek,mt8365-smi-larb + - const: mediatek,mt8186-smi-larb + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml index 7056ccb7eb30..8e3822314b25 100644 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/memory-controllers/renesas,dbsc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/memory-controllers/renesas,dbsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas DDR Bus Controllers diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml index 30a403b1b79a..56e62cd0b36a 100644 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml @@ -20,7 +20,7 @@ description: | - if it contains "cfi-flash", then HyperFlash is used. allOf: - - $ref: "/schemas/spi/spi-controller.yaml#" + - $ref: /schemas/spi/spi-controller.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml index 098348b2b815..783ac984d898 100644 --- a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml @@ -42,7 +42,7 @@ properties: maxItems: 8 devfreq-events: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 16 items: @@ -50,7 +50,7 @@ properties: description: phandles of the PPMU events used by the controller. device-handle: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: | phandle of the connected DRAM memory device. For more information please refer to jedec,lpddr3.yaml. @@ -73,7 +73,7 @@ properties: - description: registers of DREX1 samsung,syscon-clk: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: | Phandle of the clock register set used by the controller, these registers are used for enabling a 'pause' feature and are not exposed by clock diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml index c3c599096353..cd06865e1f2a 100644 --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml @@ -2,8 +2,8 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/amlogic/amlogic,canvas.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/amlogic/amlogic,canvas.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Canvas Video Lookup Table diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml new file mode 100644 index 000000000000..77c281153010 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-clk-measure.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Internal Clock Measurer + +description: + The Amlogic SoCs contains an IP to measure the internal clocks. + The precision is multiple of MHz, useful to debug the clock states. + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - amlogic,meson-gx-clk-measure + - amlogic,meson8-clk-measure + - amlogic,meson8b-clk-measure + - amlogic,meson-axg-clk-measure + - amlogic,meson-g12a-clk-measure + - amlogic,meson-sm1-clk-measure + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + clock-measure@8758 { + compatible = "amlogic,meson-gx-clk-measure"; + reg = <0x8758 0x10>; + }; diff --git a/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt b/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt deleted file mode 100644 index 3dd563cec794..000000000000 --- a/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt +++ /dev/null @@ -1,21 +0,0 @@ -Amlogic Internal Clock Measurer -=============================== - -The Amlogic SoCs contains an IP to measure the internal clocks. -The precision is multiple of MHz, useful to debug the clock states. - -Required properties: -- compatible: Shall contain one of the following : - "amlogic,meson-gx-clk-measure" for GX SoCs - "amlogic,meson8-clk-measure" for Meson8 SoCs - "amlogic,meson8b-clk-measure" for Meson8b SoCs - "amlogic,meson-axg-clk-measure" for AXG SoCs - "amlogic,meson-g12a-clk-measure" for G12a SoCs - "amlogic,meson-sm1-clk-measure" for SM1 SoCs -- reg: base address and size of the Clock Measurer register space. - -Example: - clock-measure@8758 { - compatible = "amlogic,meson-gx-clk-measure"; - reg = <0x0 0x8758 0x0 0x10>; - }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml index 15c133cac315..ba2014a8725c 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml @@ -35,6 +35,8 @@ properties: - mediatek,mt8188-disp-mutex - mediatek,mt8192-disp-mutex - mediatek,mt8195-disp-mutex + - mediatek,mt8195-vpp-mutex + - mediatek,mt8365-disp-mutex reg: maxItems: 1 @@ -70,12 +72,30 @@ properties: 4 arguments defined in this property. Each GCE subsys id is mapping to a client defined in the header include/dt-bindings/gce/<chip>-gce.h. +allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt2701-disp-mutex + - mediatek,mt2712-disp-mutex + - mediatek,mt6795-disp-mutex + - mediatek,mt8173-disp-mutex + - mediatek,mt8186-disp-mutex + - mediatek,mt8186-mdp3-mutex + - mediatek,mt8192-disp-mutex + - mediatek,mt8195-disp-mutex + then: + required: + - clocks + + required: - compatible - reg - interrupts - power-domains - - clocks additionalProperties: false diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index ab607efbb64c..798f15588ee2 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -25,6 +25,7 @@ properties: compatible: items: - enum: + - qcom,qdu1000-aoss-qmp - qcom,sc7180-aoss-qmp - qcom,sc7280-aoss-qmp - qcom,sc8180x-aoss-qmp diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml index 6026c21736d8..4502458b0669 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml @@ -62,7 +62,14 @@ properties: maxItems: 1 qcom,intents: - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 32 + items: + items: + - description: size of each intent to preallocate + - description: amount of intents to preallocate + minimum: 1 description: List of (size, amount) pairs describing what intents should be preallocated for this virtual channel. This can be used to tweak the diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index cf863683c21a..6440dc801387 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -25,6 +25,8 @@ properties: - qcom,sc8180x-pmic-glink - qcom,sc8280xp-pmic-glink - qcom,sm8350-pmic-glink + - qcom,sm8450-pmic-glink + - qcom,sm8550-pmic-glink - const: qcom,pmic-glink '#address-cells': diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml index 16fd67c0bd1f..94765fbc868e 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -33,6 +33,7 @@ properties: enum: - qcom,rpm-apq8084 - qcom,rpm-ipq6018 + - qcom,rpm-ipq9574 - qcom,rpm-msm8226 - qcom,rpm-msm8909 - qcom,rpm-msm8916 @@ -40,6 +41,7 @@ properties: - qcom,rpm-msm8953 - qcom,rpm-msm8974 - qcom,rpm-msm8976 + - qcom,rpm-msm8994 - qcom,rpm-msm8996 - qcom,rpm-msm8998 - qcom,rpm-sdm660 @@ -84,6 +86,7 @@ if: - qcom,rpm-msm8974 - qcom,rpm-msm8976 - qcom,rpm-msm8953 + - qcom,rpm-msm8994 then: properties: qcom,glink-channels: false diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml index ba694ce4a037..0548e8e0d30b 100644 --- a/Documentation/devicetree/bindings/sram/qcom,imem.yaml +++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml @@ -26,6 +26,7 @@ properties: - qcom,sdm845-imem - qcom,sdx55-imem - qcom,sdx65-imem + - qcom,sm6375-imem - qcom,sm8450-imem - const: syscon - const: simple-mfd |