summaryrefslogtreecommitdiff
path: root/drivers/hwmon/fscpos.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/fscpos.c')
-rw-r--r--drivers/hwmon/fscpos.c654
1 files changed, 0 insertions, 654 deletions
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
deleted file mode 100644
index 8a7bcf500b4e..000000000000
--- a/drivers/hwmon/fscpos.c
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- fscpos.c - Kernel module for hardware monitoring with FSC Poseidon chips
- Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/*
- fujitsu siemens poseidon chip,
- module based on the old fscpos module by Hermann Jung <hej@odn.de> and
- the fscher module by Reinhard Nissl <rnissl@gmx.de>
-
- original module based on lm80.c
- Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
- and Philip Edelbrock <phil@netroedge.com>
-
- Thanks to Jean Delvare for reviewing my code and suggesting a lot of
- improvements.
-*/
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/hwmon.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-#include <linux/sysfs.h>
-
-/*
- * Addresses to scan
- */
-static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
-
-/*
- * Insmod parameters
- */
-I2C_CLIENT_INSMOD_1(fscpos);
-
-/*
- * The FSCPOS registers
- */
-
-/* chip identification */
-#define FSCPOS_REG_IDENT_0 0x00
-#define FSCPOS_REG_IDENT_1 0x01
-#define FSCPOS_REG_IDENT_2 0x02
-#define FSCPOS_REG_REVISION 0x03
-
-/* global control and status */
-#define FSCPOS_REG_EVENT_STATE 0x04
-#define FSCPOS_REG_CONTROL 0x05
-
-/* watchdog */
-#define FSCPOS_REG_WDOG_PRESET 0x28
-#define FSCPOS_REG_WDOG_STATE 0x23
-#define FSCPOS_REG_WDOG_CONTROL 0x21
-
-/* voltages */
-#define FSCPOS_REG_VOLT_12 0x45
-#define FSCPOS_REG_VOLT_5 0x42
-#define FSCPOS_REG_VOLT_BATT 0x48
-
-/* fans - the chip does not support minimum speed for fan2 */
-static u8 FSCPOS_REG_PWM[] = { 0x55, 0x65 };
-static u8 FSCPOS_REG_FAN_ACT[] = { 0x0e, 0x6b, 0xab };
-static u8 FSCPOS_REG_FAN_STATE[] = { 0x0d, 0x62, 0xa2 };
-static u8 FSCPOS_REG_FAN_RIPPLE[] = { 0x0f, 0x6f, 0xaf };
-
-/* temperatures */
-static u8 FSCPOS_REG_TEMP_ACT[] = { 0x64, 0x32, 0x35 };
-static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 };
-
-/*
- * Functions declaration
- */
-static int fscpos_probe(struct i2c_client *client,
- const struct i2c_device_id *id);
-static int fscpos_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info);
-static int fscpos_remove(struct i2c_client *client);
-
-static int fscpos_read_value(struct i2c_client *client, u8 reg);
-static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value);
-static struct fscpos_data *fscpos_update_device(struct device *dev);
-static void fscpos_init_client(struct i2c_client *client);
-
-static void reset_fan_alarm(struct i2c_client *client, int nr);
-
-/*
- * Driver data (common to all clients)
- */
-static const struct i2c_device_id fscpos_id[] = {
- { "fscpos", fscpos },
- { }
-};
-
-static struct i2c_driver fscpos_driver = {
- .class = I2C_CLASS_HWMON,
- .driver = {
- .name = "fscpos",
- },
- .probe = fscpos_probe,
- .remove = fscpos_remove,
- .id_table = fscpos_id,
- .detect = fscpos_detect,
- .address_data = &addr_data,
-};
-
-/*
- * Client data (each client gets its own)
- */
-struct fscpos_data {
- struct device *hwmon_dev;
- struct mutex update_lock;
- char valid; /* 0 until following fields are valid */
- unsigned long last_updated; /* In jiffies */
-
- /* register values */
- u8 revision; /* revision of chip */
- u8 global_event; /* global event status */
- u8 global_control; /* global control register */
- u8 wdog_control; /* watchdog control */
- u8 wdog_state; /* watchdog status */
- u8 wdog_preset; /* watchdog preset */
- u8 volt[3]; /* 12, 5, battery current */
- u8 temp_act[3]; /* temperature */
- u8 temp_status[3]; /* status of sensor */
- u8 fan_act[3]; /* fans revolutions per second */
- u8 fan_status[3]; /* fan status */
- u8 pwm[2]; /* fan min value for rps */
- u8 fan_ripple[3]; /* divider for rps */
-};
-
-/* Temperature */
-#define TEMP_FROM_REG(val) (((val) - 128) * 1000)
-
-static ssize_t show_temp_input(struct fscpos_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[nr - 1]));
-}
-
-static ssize_t show_temp_status(struct fscpos_data *data, char *buf, int nr)
-{
- /* bits 2..7 reserved => mask with 0x03 */
- return sprintf(buf, "%u\n", data->temp_status[nr - 1] & 0x03);
-}
-
-static ssize_t show_temp_reset(struct fscpos_data *data, char *buf, int nr)
-{
- return sprintf(buf, "1\n");
-}
-
-static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int nr, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10);
- if (v != 1) {
- dev_err(&client->dev, "temp_reset value %ld not supported. "
- "Use 1 to reset the alarm!\n", v);
- return -EINVAL;
- }
-
- dev_info(&client->dev, "You used the temp_reset feature which has not "
- "been proplerly tested. Please report your "
- "experience to the module author.\n");
-
- /* Supported value: 2 (clears the status) */
- fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr - 1], 2);
- return count;
-}
-
-/* Fans */
-#define RPM_FROM_REG(val) ((val) * 60)
-
-static ssize_t show_fan_status(struct fscpos_data *data, char *buf, int nr)
-{
- /* bits 0..1, 3..7 reserved => mask with 0x04 */
- return sprintf(buf, "%u\n", data->fan_status[nr - 1] & 0x04);
-}
-
-static ssize_t show_fan_input(struct fscpos_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[nr - 1]));
-}
-
-static ssize_t show_fan_ripple(struct fscpos_data *data, char *buf, int nr)
-{
- /* bits 2..7 reserved => mask with 0x03 */
- return sprintf(buf, "%u\n", data->fan_ripple[nr - 1] & 0x03);
-}
-
-static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int nr, int reg)
-{
- /* supported values: 2, 4, 8 */
- unsigned long v = simple_strtoul(buf, NULL, 10);
-
- switch (v) {
- case 2: v = 1; break;
- case 4: v = 2; break;
- case 8: v = 3; break;
- default:
- dev_err(&client->dev, "fan_ripple value %ld not supported. "
- "Must be one of 2, 4 or 8!\n", v);
- return -EINVAL;
- }
-
- mutex_lock(&data->update_lock);
- /* bits 2..7 reserved => mask with 0x03 */
- data->fan_ripple[nr - 1] &= ~0x03;
- data->fan_ripple[nr - 1] |= v;
-
- fscpos_write_value(client, reg, data->fan_ripple[nr - 1]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_pwm(struct fscpos_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", data->pwm[nr - 1]);
-}
-
-static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10);
-
- /* Range: 0..255 */
- if (v < 0) v = 0;
- if (v > 255) v = 255;
-
- mutex_lock(&data->update_lock);
- data->pwm[nr - 1] = v;
- fscpos_write_value(client, reg, data->pwm[nr - 1]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static void reset_fan_alarm(struct i2c_client *client, int nr)
-{
- fscpos_write_value(client, FSCPOS_REG_FAN_STATE[nr], 4);
-}
-
-/* Volts */
-#define VOLT_FROM_REG(val, mult) ((val) * (mult) / 255)
-
-static ssize_t show_volt_12(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct fscpos_data *data = fscpos_update_device(dev);
- return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[0], 14200));
-}
-
-static ssize_t show_volt_5(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct fscpos_data *data = fscpos_update_device(dev);
- return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[1], 6600));
-}
-
-static ssize_t show_volt_batt(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct fscpos_data *data = fscpos_update_device(dev);
- return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[2], 3300));
-}
-
-/* Watchdog */
-static ssize_t show_wdog_control(struct fscpos_data *data, char *buf)
-{
- /* bits 0..3 reserved, bit 6 write only => mask with 0xb0 */
- return sprintf(buf, "%u\n", data->wdog_control & 0xb0);
-}
-
-static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int reg)
-{
- /* bits 0..3 reserved => mask with 0xf0 */
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
-
- mutex_lock(&data->update_lock);
- data->wdog_control &= ~0xf0;
- data->wdog_control |= v;
- fscpos_write_value(client, reg, data->wdog_control);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_wdog_state(struct fscpos_data *data, char *buf)
-{
- /* bits 0, 2..7 reserved => mask with 0x02 */
- return sprintf(buf, "%u\n", data->wdog_state & 0x02);
-}
-
-static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
-
- /* Valid values: 2 (clear) */
- if (v != 2) {
- dev_err(&client->dev, "wdog_state value %ld not supported. "
- "Must be 2 to clear the state!\n", v);
- return -EINVAL;
- }
-
- mutex_lock(&data->update_lock);
- data->wdog_state &= ~v;
- fscpos_write_value(client, reg, v);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_wdog_preset(struct fscpos_data *data, char *buf)
-{
- return sprintf(buf, "%u\n", data->wdog_preset);
-}
-
-static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
-
- mutex_lock(&data->update_lock);
- data->wdog_preset = v;
- fscpos_write_value(client, reg, data->wdog_preset);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-/* Event */
-static ssize_t show_event(struct device *dev, struct device_attribute *attr, char *buf)
-{
- /* bits 5..7 reserved => mask with 0x1f */
- struct fscpos_data *data = fscpos_update_device(dev);
- return sprintf(buf, "%u\n", data->global_event & 0x9b);
-}
-
-/*
- * Sysfs stuff
- */
-#define create_getter(kind, sub) \
- static ssize_t sysfs_show_##kind##sub(struct device *dev, struct device_attribute *attr, char *buf) \
- { \
- struct fscpos_data *data = fscpos_update_device(dev); \
- return show_##kind##sub(data, buf); \
- }
-
-#define create_getter_n(kind, offset, sub) \
- static ssize_t sysfs_show_##kind##offset##sub(struct device *dev, struct device_attribute *attr, char\
- *buf) \
- { \
- struct fscpos_data *data = fscpos_update_device(dev); \
- return show_##kind##sub(data, buf, offset); \
- }
-
-#define create_setter(kind, sub, reg) \
- static ssize_t sysfs_set_##kind##sub (struct device *dev, struct device_attribute *attr, const char \
- *buf, size_t count) \
- { \
- struct i2c_client *client = to_i2c_client(dev); \
- struct fscpos_data *data = i2c_get_clientdata(client); \
- return set_##kind##sub(client, data, buf, count, reg); \
- }
-
-#define create_setter_n(kind, offset, sub, reg) \
- static ssize_t sysfs_set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
- { \
- struct i2c_client *client = to_i2c_client(dev); \
- struct fscpos_data *data = i2c_get_clientdata(client); \
- return set_##kind##sub(client, data, buf, count, offset, reg);\
- }
-
-#define create_sysfs_device_ro(kind, sub, offset) \
- static DEVICE_ATTR(kind##offset##sub, S_IRUGO, \
- sysfs_show_##kind##offset##sub, NULL);
-
-#define create_sysfs_device_rw(kind, sub, offset) \
- static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, \
- sysfs_show_##kind##offset##sub, sysfs_set_##kind##offset##sub);
-
-#define sysfs_ro_n(kind, sub, offset) \
- create_getter_n(kind, offset, sub); \
- create_sysfs_device_ro(kind, sub, offset);
-
-#define sysfs_rw_n(kind, sub, offset, reg) \
- create_getter_n(kind, offset, sub); \
- create_setter_n(kind, offset, sub, reg); \
- create_sysfs_device_rw(kind, sub, offset);
-
-#define sysfs_rw(kind, sub, reg) \
- create_getter(kind, sub); \
- create_setter(kind, sub, reg); \
- create_sysfs_device_rw(kind, sub,);
-
-#define sysfs_fan_with_min(offset, reg_status, reg_ripple, reg_min) \
- sysfs_fan(offset, reg_status, reg_ripple); \
- sysfs_rw_n(pwm,, offset, reg_min);
-
-#define sysfs_fan(offset, reg_status, reg_ripple) \
- sysfs_ro_n(fan, _input, offset); \
- sysfs_ro_n(fan, _status, offset); \
- sysfs_rw_n(fan, _ripple, offset, reg_ripple);
-
-#define sysfs_temp(offset, reg_status) \
- sysfs_ro_n(temp, _input, offset); \
- sysfs_ro_n(temp, _status, offset); \
- sysfs_rw_n(temp, _reset, offset, reg_status);
-
-#define sysfs_watchdog(reg_wdog_preset, reg_wdog_state, reg_wdog_control) \
- sysfs_rw(wdog, _control, reg_wdog_control); \
- sysfs_rw(wdog, _preset, reg_wdog_preset); \
- sysfs_rw(wdog, _state, reg_wdog_state);
-
-sysfs_fan_with_min(1, FSCPOS_REG_FAN_STATE[0], FSCPOS_REG_FAN_RIPPLE[0],
- FSCPOS_REG_PWM[0]);
-sysfs_fan_with_min(2, FSCPOS_REG_FAN_STATE[1], FSCPOS_REG_FAN_RIPPLE[1],
- FSCPOS_REG_PWM[1]);
-sysfs_fan(3, FSCPOS_REG_FAN_STATE[2], FSCPOS_REG_FAN_RIPPLE[2]);
-
-sysfs_temp(1, FSCPOS_REG_TEMP_STATE[0]);
-sysfs_temp(2, FSCPOS_REG_TEMP_STATE[1]);
-sysfs_temp(3, FSCPOS_REG_TEMP_STATE[2]);
-
-sysfs_watchdog(FSCPOS_REG_WDOG_PRESET, FSCPOS_REG_WDOG_STATE,
- FSCPOS_REG_WDOG_CONTROL);
-
-static DEVICE_ATTR(event, S_IRUGO, show_event, NULL);
-static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL);
-static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL);
-static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL);
-
-static struct attribute *fscpos_attributes[] = {
- &dev_attr_event.attr,
- &dev_attr_in0_input.attr,
- &dev_attr_in1_input.attr,
- &dev_attr_in2_input.attr,
-
- &dev_attr_wdog_control.attr,
- &dev_attr_wdog_preset.attr,
- &dev_attr_wdog_state.attr,
-
- &dev_attr_temp1_input.attr,
- &dev_attr_temp1_status.attr,
- &dev_attr_temp1_reset.attr,
- &dev_attr_temp2_input.attr,
- &dev_attr_temp2_status.attr,
- &dev_attr_temp2_reset.attr,
- &dev_attr_temp3_input.attr,
- &dev_attr_temp3_status.attr,
- &dev_attr_temp3_reset.attr,
-
- &dev_attr_fan1_input.attr,
- &dev_attr_fan1_status.attr,
- &dev_attr_fan1_ripple.attr,
- &dev_attr_pwm1.attr,
- &dev_attr_fan2_input.attr,
- &dev_attr_fan2_status.attr,
- &dev_attr_fan2_ripple.attr,
- &dev_attr_pwm2.attr,
- &dev_attr_fan3_input.attr,
- &dev_attr_fan3_status.attr,
- &dev_attr_fan3_ripple.attr,
- NULL
-};
-
-static const struct attribute_group fscpos_group = {
- .attrs = fscpos_attributes,
-};
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int fscpos_detect(struct i2c_client *new_client, int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = new_client->adapter;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
-
- /* Do the remaining detection unless force or force_fscpos parameter */
- if (kind < 0) {
- if ((fscpos_read_value(new_client, FSCPOS_REG_IDENT_0)
- != 0x50) /* 'P' */
- || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_1)
- != 0x45) /* 'E' */
- || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2)
- != 0x47))/* 'G' */
- return -ENODEV;
- }
-
- strlcpy(info->type, "fscpos", I2C_NAME_SIZE);
-
- return 0;
-}
-
-static int fscpos_probe(struct i2c_client *new_client,
- const struct i2c_device_id *id)
-{
- struct fscpos_data *data;
- int err;
-
- data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL);
- if (!data) {
- err = -ENOMEM;
- goto exit;
- }
-
- i2c_set_clientdata(new_client, data);
- data->valid = 0;
- mutex_init(&data->update_lock);
-
- /* Inizialize the fscpos chip */
- fscpos_init_client(new_client);
-
- /* Announce that the chip was found */
- dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision);
-
- /* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group)))
- goto exit_free;
-
- data->hwmon_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove_files;
- }
-
- return 0;
-
-exit_remove_files:
- sysfs_remove_group(&new_client->dev.kobj, &fscpos_group);
-exit_free:
- kfree(data);
-exit:
- return err;
-}
-
-static int fscpos_remove(struct i2c_client *client)
-{
- struct fscpos_data *data = i2c_get_clientdata(client);
-
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &fscpos_group);
-
- kfree(data);
- return 0;
-}
-
-static int fscpos_read_value(struct i2c_client *client, u8 reg)
-{
- dev_dbg(&client->dev, "Read reg 0x%02x\n", reg);
- return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value)
-{
- dev_dbg(&client->dev, "Write reg 0x%02x, val 0x%02x\n", reg, value);
- return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-/* Called when we have found a new FSCPOS chip */
-static void fscpos_init_client(struct i2c_client *client)
-{
- struct fscpos_data *data = i2c_get_clientdata(client);
-
- /* read revision from chip */
- data->revision = fscpos_read_value(client, FSCPOS_REG_REVISION);
-}
-
-static struct fscpos_data *fscpos_update_device(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct fscpos_data *data = i2c_get_clientdata(client);
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
- int i;
-
- dev_dbg(&client->dev, "Starting fscpos update\n");
-
- for (i = 0; i < 3; i++) {
- data->temp_act[i] = fscpos_read_value(client,
- FSCPOS_REG_TEMP_ACT[i]);
- data->temp_status[i] = fscpos_read_value(client,
- FSCPOS_REG_TEMP_STATE[i]);
- data->fan_act[i] = fscpos_read_value(client,
- FSCPOS_REG_FAN_ACT[i]);
- data->fan_status[i] = fscpos_read_value(client,
- FSCPOS_REG_FAN_STATE[i]);
- data->fan_ripple[i] = fscpos_read_value(client,
- FSCPOS_REG_FAN_RIPPLE[i]);
- if (i < 2) {
- /* fan2_min is not supported by the chip */
- data->pwm[i] = fscpos_read_value(client,
- FSCPOS_REG_PWM[i]);
- }
- /* reset fan status if speed is back to > 0 */
- if (data->fan_status[i] != 0 && data->fan_act[i] > 0) {
- reset_fan_alarm(client, i);
- }
- }
-
- data->volt[0] = fscpos_read_value(client, FSCPOS_REG_VOLT_12);
- data->volt[1] = fscpos_read_value(client, FSCPOS_REG_VOLT_5);
- data->volt[2] = fscpos_read_value(client, FSCPOS_REG_VOLT_BATT);
-
- data->wdog_preset = fscpos_read_value(client,
- FSCPOS_REG_WDOG_PRESET);
- data->wdog_state = fscpos_read_value(client,
- FSCPOS_REG_WDOG_STATE);
- data->wdog_control = fscpos_read_value(client,
- FSCPOS_REG_WDOG_CONTROL);
-
- data->global_event = fscpos_read_value(client,
- FSCPOS_REG_EVENT_STATE);
-
- data->last_updated = jiffies;
- data->valid = 1;
- }
- mutex_unlock(&data->update_lock);
- return data;
-}
-
-static int __init sm_fscpos_init(void)
-{
- return i2c_add_driver(&fscpos_driver);
-}
-
-static void __exit sm_fscpos_exit(void)
-{
- i2c_del_driver(&fscpos_driver);
-}
-
-MODULE_AUTHOR("Stefan Ott <stefan@desire.ch> based on work from Hermann Jung "
- "<hej@odn.de>, Frodo Looijaard <frodol@dds.nl>"
- " and Philip Edelbrock <phil@netroedge.com>");
-MODULE_DESCRIPTION("fujitsu siemens poseidon chip driver");
-MODULE_LICENSE("GPL");
-
-module_init(sm_fscpos_init);
-module_exit(sm_fscpos_exit);