| Age | Commit message (Collapse) | Author |
|---|
|
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull more block updates from Jens Axboe:
- Improve blk-integrity segment counting and merging (Keith)
- NVMe pull request via Keith:
- Multipath fixes (Hannes)
- Sysfs attribute list NULL terminate fix (Shin'ichiro)
- Remove problematic read-back (Keith)
- Fix for a regression with the IO scheduler switching freezing from
6.11 (Damien)
- Use a raw spinlock for sbitmap, as it may get called from preempt
disabled context (Ming)
- Cleanup for bd_claiming waiting, using var_waitqueue() rather than
the bit waitqueues, as that more accurately describes that it does
(Neil)
- Various cleanups (Kanchan, Qiu-ji, David)
* tag 'for-6.12/block-20240925' of git://git.kernel.dk/linux:
nvme: remove CC register read-back during enabling
nvme: null terminate nvme_tls_attrs
nvme-multipath: avoid hang on inaccessible namespaces
nvme-multipath: system fails to create generic nvme device
lib/sbitmap: define swap_lock as raw_spinlock_t
block: Remove unused blk_limits_io_{min,opt}
drbd: Fix atomicity violation in drbd_uuid_set_bm()
block: Fix elv_iosched_local_module handling of "none" scheduler
block: remove bogus union
block: change wait on bd_claiming to use a var_waitqueue
blk-integrity: improved sg segment mapping
block: unexport blk_rq_count_integrity_sg
nvme-rdma: use request to get integrity segments
scsi: use request to get integrity segments
block: provide a request helper for user integrity segments
blk-integrity: consider entire bio list for merging
blk-integrity: properly account for segments
blk-mq: set the nr_integrity_segments from bio
blk-mq: unconditional nr_integrity_segments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc,
mpi3mr).
There are no user visible core changes and a whole series of minor
updates and fixes. The largest core change is probably the
simplification of the workqueue allocation path"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (86 commits)
scsi: smartpqi: update driver version to 2.1.30-031
scsi: smartpqi: fix volume size updates
scsi: smartpqi: fix rare system hang during LUN reset
scsi: smartpqi: add new controller PCI IDs
scsi: smartpqi: add counter for parity write stream requests
scsi: smartpqi: correct stream detection
scsi: smartpqi: Add fw log to kdump
scsi: bnx2fc: Remove some unused fields in struct bnx2fc_rport
scsi: qla2xxx: Remove the unused 'del_list_entry' field in struct fc_port
scsi: ufs: core: Remove ufshcd_urgent_bkops()
scsi: core: Remove obsoleted declaration for scsi_driverbyte_string()
scsi: bnx2i: Remove unused declarations
scsi: core: Simplify an alloc_workqueue() invocation
scsi: ufs: Simplify alloc*_workqueue() invocation
scsi: stex: Simplify an alloc_ordered_workqueue() invocation
scsi: scsi_transport_fc: Simplify alloc_workqueue() invocations
scsi: snic: Simplify alloc_workqueue() invocations
scsi: qedi: Simplify an alloc_workqueue() invocation
scsi: qedf: Simplify alloc_workqueue() invocations
scsi: myrs: Simplify an alloc_ordered_workqueue() invocation
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Convert the qcom AHCI controller DT bindings to DT schema (from
Rayyan)
- Cleanup of libata core and drivers code handling controller and
device quirks to rename "blacklist" to the more neutral "quirk" and
to replace the rarely used "horkage" term with the more common
"quirk" naming (me)
- Add libata-core message to print the quirks applied to a controller
or device (me)
- Remove the not-so-useful function ata_noop_qc_prep() from libata core
(me)
- ahci_imx driver cleanup, improvements and DT bindings compatible
strings update (Richard and Dan)
- libahci_platform improvements (Zhang)
- Remove obsolete functions declarations from libata header files (from
Gaosheng)
- Improve teh ahci_brcm driver using managed device resources funetions
(Zhang)
- Introduce new helper function to improve libata EH code readability
(Niklas)
- Enable module autoloading for the pata_ftide010, pata_ixp4xx and
sata_gemini drivers (Liao)
- Move SATA related functions and data declaraions from libata-core to
libata-sata (me)
- Rename the function handling the sense data for successful NCQ
commands log to better reflect that function actions (me)
- Reduce libata memory usage by moving port resources to struct
ata_device and by optimizing the management of resources for CDL
capable devices (me)
- Improve libata-eh handling of failed ATA passthrough commands
(Niklas)
* tag 'ata-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: (39 commits)
ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data
ata: libata: Fix W=1 compilation warning
ata: libata: Improve CDL resource management
ata: libata: Introduce ata_dev_free_resources
ata: libata: Move sector_buf from struct ata_port to struct ata_device
ata: libata: Rename ata_eh_read_sense_success_ncq_log()
ata: libata: Move sata_std_hardreset() definition to libata-sata.c
ata: libata: Move sata_down_spd_limit() to libata-sata.c
ata: libata: Improve __ata_qc_complete()
ata: libata-scsi: Improve ata_scsi_handle_link_detach()
ata: libata: Cleanup libata-transport
ata: sata_gemini: Enable module autoloading
ata: pata_ixp4xx: Enable module autoloading
ata: pata_ftide010: Enable module autoloading
ata: libata: Add helper ata_eh_decide_disposition()
ata: ahci_brcm: Use devm_platform_ioremap_resource_byname() helper function
ata: libata: Remove obsolete function declarations
ata: ahci_imx: Fix error code in probe()
ata: libahci_platform: Simplify code with for_each_child_of_node_scoped()
ata: ahci_imx: Correct the email address
...
|
|
Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.
* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...
|
|
Make the integrity mapping more like data mapping, blk_rq_map_sg. Use
the request to validate the segment count, and update the callers so
they don't have to.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913191746.2628196-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The request tracks the integrity segments already, so no need to recount
the segments again.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913182854.2445457-7-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.5
This patch set contains bug fixes related to HBA state clean ups, FCP
discovery on older adapters, kref imbalances, log message improvements,
and support for a new diagnostic loopback testing mode.
The patches were cut against Martin's 6.12/scsi-queue tree.
Link: https://lore.kernel.org/r/20240912232447.45607-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update lpfc version to 14.4.0.5
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The VMID feature adds an extra application services header to each frame.
As such, the loopback test path is updated to accommodate the extra
application header.
Changes include filling in APPID and WQES bit fields for XMIT_SEQUENCE64
commands, a special loopback source APPID for verifying received loopback
data matches what is sent, and increasing ELS WQ size to accommodate the
APPID field in loopback test mode.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Revise certain log messages marked as KERN_ERR LOG_TRACE_EVENT to
KERN_WARNING and use the lpfc_vlog_msg() macro to still log the event. The
benefit is that events of interest are still logged and the entire trace
buffer is not dumped with extraneous logging information when using default
lpfc_log_verbose driver parameter settings.
Also, delete the keyword "fail" from such log messages as they aren't
really causes for concern. The log messages are more for warnings to a SAN
admin about SAN activity.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Deleting an NPIV instance requires all fabric ndlps to be released before
an NPIV's resources can be torn down. Failure to release fabric ndlps
beforehand opens kref imbalance race conditions. Fix by forcing the DA_ID
to complete synchronously with usage of wait_queue.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
With a FLOGI outstanding and loss of physical link connection to the fabric
for the duration of dev_loss_tmo, there is a fabric ndlp kref imbalance
that decrements the kref and sets the NLP_IN_RECOV_POST_DEV_LOSS flag at
the same time.
The issue is that when the FLOGI completion routine executes, the fabric
ndlp could already be freed because of the final kref put from the
dev_loss_tmo handler. Fix by early returning before the ndlp kref put if
the ndlp is deemed a candidate for NLP_IN_RECOV_POST_DEV_LOSS in the FLOGI
completion routine.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
An older generation of HBAs are failing FCP discovery due to usage of an
outdated field in FCP command WQEs.
Fix by checking the SLI Interface Type register for applicable support of
32 Byte CDB commands, and restore a setting for a WQE path using normal 16
byte CDBs.
Fixes: af20bb73ac25 ("scsi: lpfc: Add support for 32 byte CDBs")
Cc: stable@vger.kernel.org # v6.10+
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
It's possible for the driver to send a CMF_SYNC_WQE to nonresponsive
firmware during reset of the adapter. The phba link_state conditional
check is currently a strict == LPFC_LINK_DOWN, which does not cover
initialization states before reaching the LPFC_LINK_UP state.
Update the phba->link_state conditional to < LPFC_LINK_UP so that all
initialization states are covered before allowing sending CMF_SYNC_WQE.
Update taking of the hbalock to be during this link_state check as well.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During HBA stress testing, a spam of received PLOGIs exposes a resource
recovery bug causing leakage of lpfc_sqlq entries from the global
phba->sli4_hba.lpfc_els_sgl_list.
The issue is in lpfc_els_flush_cmd(), where the driver attempts to recover
outstanding ELS sgls when walking the txcmplq. Only CMD_ELS_REQUEST64_CRs
and CMD_GEN_REQUEST64_CRs are added to the abort and cancel lists. A check
for CMD_XMIT_ELS_RSP64_WQE is missing in order to recover LS_ACC usages of
the phba->sli4_hba.lpfc_els_sgl_list too.
Fix by adding CMD_XMIT_ELS_RSP64_WQE as part of the txcmplq walk when
adding WQEs to the abort and cancel list in lpfc_els_flush_cmd(). Also,
update naming convention from CRs to WQEs.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Ranjan Kumar <ranjan.kumar@broadcom.com> says:
Few Enhancements and minor fix of mpi3mr driver.
Link: https://lore.kernel.org/r/20240905102753.105310-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update driver version to 8.12.0.0.50.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240905102753.105310-6-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During controller transitioning to READY state, if the controller is found
in transient states ("becoming ready" or "reset requested"), driver waits
for 510 secs even if the controller transitions out of these states
early. This causes an unnecessary delay of 510 secs in the overall firmware
initialization sequence.
Poll the controller state periodically (every 100 milliseconds) while
waiting for the controller to come out of the mentioned transient
states. Once the controller transits out of the transient states, come out
of the wait loop.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240905102753.105310-5-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update MPI Headers to revision 34.
Signed-off-by: Prayas Patel <prayas.patel@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240905102753.105310-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make driver use the timestamp update interval value provided by firmware in
the driver page 1. If firmware fails to provide non-zero value, then the
driver will fall back to the driver defined macro.
Signed-off-by: Prayas Patel <prayas.patel@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240905102753.105310-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When enabling the IOC request and polling for controller ready status, poll
for controller fault and reset history bit. If the controller is faulted
or the reset history bit is set, retry the initialization a maximum of
three times (2 retries) or if the cumulative time taken for all retries
exceeds 510 seconds.
Signed-off-by: Prayas Patel <prayas.patel@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240905102753.105310-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Ff the device returns page 0xb1 with length 8 (happens with qemu v2.x, for
example), sd_read_block_characteristics() may attempt an out-of-bounds
memory access when accessing the zoned field at offset 8.
Fixes: 7fb019c46eee ("scsi: sd: Switch to using scsi_device VPD pages")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20240912134308.282824-1-mwilck@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
blk_mq_pci_map_queues() maps all queues but right after this, we overwrite
these mappings by calling blk_mq_map_queues(). Just use one helper but not
both.
Fixes: 42f22fe36d51 ("scsi: pm8001: Expose hardware queues for pm80xx")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20240912-do-not-overwrite-pci-mapping-v1-1-85724b6cec49@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
'arr' is kzalloc()'ed, so there is no need to call memset(.., 0, ...) on
it. It is already cleared.
This is a follow up of commit b952eb270df3 ("scsi: scsi_debug: Allocate the
MODE SENSE response from the heap").
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6296722174e39a51cac74b7fc68b0d75bd0db2a3.1725690433.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects. Although
that is not the case here, it is seems best to use ';' unless ',' is
intended.
Found by inspection. No functional change intended. Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20240905023521.1642862-1-nichen@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During system resume, sd_start_stop_device() submits a START STOP UNIT
command to the SCSI device that is being resumed. That command is not
retried in case of a unit attention and hence may fail. An example:
[16575.983359] sd 0:0:0:3: [sdd] Starting disk
[16575.983693] sd 0:0:0:3: [sdd] Start/Stop Unit failed: Result: hostbyte=0x00 driverbyte=DRIVER_OK
[16575.983712] sd 0:0:0:3: [sdd] Sense Key : 0x6
[16575.983730] sd 0:0:0:3: [sdd] ASC=0x29 ASCQ=0x0
[16575.983738] sd 0:0:0:3: PM: dpm_run_callback(): scsi_bus_resume+0x0/0xa0 returns -5
[16575.983783] sd 0:0:0:3: PM: failed to resume async: error -5
Make the SCSI core retry the START STOP UNIT command if the device reports
that it has been powered on or that it has been reset.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240904210304.2947789-1-bvanassche@acm.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 0c52310f2600 ("hrtimer: Ignore slack time for RT tasks in
schedule_hrtimeout_range()") effectivelly shortens a sleep in a polling
function in the driver. That is causing a performance regression as the
new value of just 2us is too low, in certain tests the perf drop is ~30%.
Fix this by adjusting the sleep to 20us (close to the previous value).
Reported-by: Jan Jurca <jjurca@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20240903144729.37218-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a extraneous space after a newline in an ioc_info message.
Remove it and join to split literal strings into one.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902172708.369741-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a extraneous space after a newline in two lpfc_printf_log()
messages. Remove the space.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902150042.311157-1-colin.i.king@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a extraneous space after a newline in a QEDF_INFO message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902145138.310883-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a extraneous space after a newline in a dev_info message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902144153.309920-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a extraneous space after a newline in a dev_err message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902142252.309232-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a extraneous space after a newline in a pm8001_dbg message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902141537.308914-1-colin.i.king@gmail.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a extraneous space after a newline in a dev_printk message,
remove it. Also fix non-tabbed indentation of the statement.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902141202.308632-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Usage of .dev_ddp_cleanup() in libcxgbi was removed by commit 5999299f1ce9
("cxgb3i,cxgb4i,libcxgbi: remove iSCSI DDP support") on 2016-07.
.csk_rx_pdu_ready() and debugfs_root have apparently never been used since
introduction by commit 9ba682f01e2f ("[SCSI] libcxgbi: common library for
cxgb3i and cxgb4i")
Remove the now unused function pointer from struct cxgbi_device.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/58f77f690d85e2c653447e3e3fc4f8d3c3ce8563.1725223504.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are some scenarios that can occur, such as performing an upgrade of
the virtual I/O server, where the supported max transfer of the backing
device for an ibmvfc HBA can change. If the max transfer of the backing
device decreases, this can cause issues with previously discovered
LUNs. This patch accomplishes two things. First, it changes the default
ibmvfc max transfer value to 1MB. This is generally supported by all
backing devices, which should mitigate this issue out of the box. Secondly,
it adds a module parameter, enabling a user to increase the max transfer
value to values that are larger than 1MB, as long as they have configured
these larger values on the virtual I/O server as well.
[mkp: fix checkpatch warnings]
Signed-off-by: Brian King <brking@linux.ibm.com>
Link: https://lore.kernel.org/r/20240903134708.139645-2-brking@linux.ibm.com
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The header file linux/bio-integrity.h is included twice. Remove the last
one. The compilation test has passed.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240830075858.3541907-1-lihongbo22@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A previous change was introduced to prevent data loss during a power-on
reset when a tape is present inside the drive. This commit set the
"pos_unknown" flag to true to avoid operations that could compromise data
by performing actions from an untracked position. The relevant change is
commit 9604eea5bd3a ("scsi: st: Add third party poweron reset handling")
As a consequence of this change, a new issue has surfaced: the driver now
returns an "Input/output error" even for empty drives when the drive, host,
or bus is reset. This issue stems from the "flush_buffer" function, which
first checks whether the "pos_unknown" flag is set. If the flag is set, the
user will encounter an "Input/output error" until the tape position is
known again. This behavior differs from the previous implementation, where
empty drives were not affected at system start up time, allowing tape
software to send commands to the driver to retrieve the drive's status and
other information.
The current behavior prioritizes the "pos_unknown" flag over the
"ST_NO_TAPE" status, leading to issues for software that detects drives
during system startup. This software will receive an "Input/output error"
until a tape is loaded and its position is known.
To resolve this, the "ST_NO_TAPE" status should take priority when the
drive is empty, allowing communication with the drive following a power-on
reset. At the same time, the change should continue to protect data by
maintaining the "pos_unknown" flag when the drive contains a tape and its
position is unknown.
Signed-off-by: Rafael Rocha <rrochavi@fnal.gov>
Link: https://lore.kernel.org/r/20240905173921.10944-1-rrochavi@fnal.gov
Fixes: 9604eea5bd3a ("scsi: st: Add third party poweron reset handling")
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are some spelling mistakes of 'retun' in comments which
should be instead of 'return'.
Link: https://lkml.kernel.org/r/63D0F870EE8E87A0+20240906054008.390188-1-wangyuli@uniontech.com
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/phy_device.c
2560db6ede1a ("net: phy: Fix missing of_node_put() for leds")
1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()")
https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/xilinx/xilinx_axienet.h
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop")
76abb5d675c4 ("net: xilinx: axienet: Add statistics support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ability to handle maximum FCoE frames of 2158 bytes can never be changed
and thus more of an attribute, not a toggleable feature.
Move it from netdev_features_t to "cold" priv flags (bitfield bool) and
free yet another feature bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Minor fixes only.
The sd.c one ignores a sync cache request if format is in progress
which can happen if formatting a drive across suspend/resume"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progress
scsi: aacraid: Fix double-free on probe failure
scsi: lpfc: Fix overflow build issue
|
|
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
|
|
We'll start throwing warnings soon when dma_set_seg_boundary and
dma_set_max_seg_size are called on devices for buses that don't fully
support the DMA API. Prepare for that by making the calls in the SCSI
midlayer conditional.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Don Brace <don.brace@microchip.com> says:
These patches are based on Martin Petersen's 6.12/scsi-queue tree
https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
6.12/scsi-queue
There are two functional changes:
smartpqi-add-fw-log-to-kdump
smartpqi-add-counter-for-parity-write-stream-requests
There are three minor bug fixes:
smartpqi-fix-stream-detection
smartpqi-fix-rare-system-hang-during-LUN-reset
smartpqi-fix-volume-size-updates
The other two patches add PCI-IDs for new controllers and change the
driver version.
This set of changes consists of:
* smartpqi-add-fw-log-to-kdump
During a kdump, the driver tells the controller to copy its logging
information to some pre-allocated buffers that can be analyzed
later.
This is a "feature" driven capability and is backward compatible
with existing controller FW.
This patch renames some prefixes for OFA (Online-Firmware Activation
ofa_*) buffers to host_memory_*. So, not a lot of actual functional
changes to smartpqi_init.c, mainly determining the memory size
allocation.
We added a function to notify the controller to copy debug data into
host memory before continuing kdump.
Most of the functional changes are in smartpqi_sis.c where the
actual handshaking is done.
* smartpqi-fix-stream-detection
Correct some false write-stream detections. The data structure used
to check for write-streams was not initialized to all 0's causing
some false write stream detections. The driver sends down streamed
requests to the raid engine instead of using AIO bypass for some
extra performance. (Potential full-stripe write verses Read Modify
Write).
False detections have not caused any data corruption. Found by
internal testing. No known externally reported bugs.
* smartpqi-add-counter-for-parity-write-stream-requests
Adding some counters for raid_bypass and write streams. These two
counters are related because write stream detection is only checked
if an I/O request is eligible for bypass (AIO).
The bypass counter (raid_bypass_cnt) was moved into a common
structure (pqi_raid_io_stats) and changed to type __percpu. The
write stream counter is (write_stream_cnt) has been added to this
same structure.
These counters are __percpu counters for performance. We added a
sysfs entry to show the write stream count. The raid bypass counter
sysfs entry already exists.
Useful for checking streaming writes. The change in the sysfs entry
write_stream_cnt can be checked during AIO eligible write
operations.
* smartpqi-add-new-controller-PCI-IDs
Adding support for new controller HW. No functional changes.
* smartpqi-fix-rare-system-hang-during-LUN-reset
We found a rare race condition that can occur during a LUN reset. We
were not emptying our internal queue completely.
There have been some rare conditions where our internal request
queue has requests for multiple LUNs and a reset comes in for one of
the LUNs. The driver waits for this internal queue to empty. We were
only clearing out the requests for the LUN being reset so the
request queue was never empty causing a hang.
The Fix:
For all requests in our internal request queue:
Complete requests with DID_RESET for queued requests for the
device undergoing a reset.
Complete requests with DID_REQUEUE for all other queued requests.
Found by internal testing. No known externally reported bugs.
* smartpqi-fix-volume-size-updates
The current code only checks for a size change if there is also a
queue depth change. We are separating the check for queue depth and
the size changes.
Found by internal testing. No known bugs were filed.
* smartpqi-update-version-to-2.1.30-031
No functional changes.
Link: https://lore.kernel.org/r/20240827185501.692804-1-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update driver version to 2.1.30-031.
Reviewed-by: David Strahan <david.strahan@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-8-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
