diff options
| -rw-r--r-- | hw/arm/iotkit.c | 15 | ||||
| -rw-r--r-- | include/hw/arm/iotkit.h | 8 |
2 files changed, 23 insertions, 0 deletions
diff --git a/hw/arm/iotkit.c b/hw/arm/iotkit.c index f8276b5425..8742200fb4 100644 --- a/hw/arm/iotkit.c +++ b/hw/arm/iotkit.c @@ -667,6 +667,21 @@ static void iotkit_realize(DeviceState *dev, Error **errp) iotkit_forward_sec_resp_cfg(s); + /* Forward the MSC related signals */ + qdev_pass_gpios(dev_secctl, dev, "mscexp_status"); + qdev_pass_gpios(dev_secctl, dev, "mscexp_clear"); + qdev_pass_gpios(dev_secctl, dev, "mscexp_ns"); + qdev_connect_gpio_out_named(dev_secctl, "msc_irq", 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 11)); + + /* + * Expose our container region to the board model; this corresponds + * to the AHB Slave Expansion ports which allow bus master devices + * (eg DMA controllers) in the board model to make transactions into + * devices in the IoTKit. + */ + sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); + system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; } diff --git a/include/hw/arm/iotkit.h b/include/hw/arm/iotkit.h index 426dc326a0..3a8ee63908 100644 --- a/include/hw/arm/iotkit.h +++ b/include/hw/arm/iotkit.h @@ -28,6 +28,9 @@ * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts, which * are wired to the NVIC lines 32 .. n+32 + * + sysbus MMIO region 0 is the "AHB Slave Expansion" which allows + * bus master devices in the board model to make transactions into + * all the devices and memory areas in the IoTKit * Controlling up to 4 AHB expansion PPBs which a system using the IoTKit * might provide: * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] @@ -45,6 +48,11 @@ * Controlling each of the 16 expansion MPCs which a system using the IoTKit * might provide: * + named GPIO inputs mpcexp_status[0..15] + * Controlling each of the 16 expansion MSCs which a system using the IoTKit + * might provide: + * + named GPIO inputs mscexp_status[0..15] + * + named GPIO outputs mscexp_clear[0..15] + * + named GPIO outputs mscexp_ns[0..15] */ #ifndef IOTKIT_H |