1 files changed, 194 insertions, 0 deletions
diff --git a/docs/drivers/is31fl3218.md b/docs/drivers/is31fl3218.md
new file mode 100644
index 0000000000..1c98069120
--- /dev/null
+++ b/docs/drivers/is31fl3218.md
@@ -0,0 +1,194 @@
+# IS31FL3218 Driver {#is31fl3218-driver}
+
+I²C LED driver by Lumissil. Supports up to 18 single-color LEDs, or 6 RGB LEDs.
+
+[IS31FL3218 Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3218_DS.pdf)
+
+## Usage {#usage}
+
+The IS31FL3218 driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3218` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led/issi
+SRC += is31fl3218-mono.c # For single-color
+SRC += is31fl3218.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                      |Default      |Description                                        |
+|----------------------------|-------------|---------------------------------------------------|
+|`IS31FL3218_SDB_PIN`        |*Not defined*|The GPIO pin connected to the driver's shutdown pin|
+|`IS31FL3218_I2C_TIMEOUT`    |`100`        |The I²C timeout in milliseconds                    |
+|`IS31FL3218_I2C_PERSISTENCE`|`0`          |The number of times to retry I²C transmissions     |
+
+### I²C Addressing {#i2c-addressing}
+
+The IS31FL3218's 7-bit I²C address is `0x54`, available as `IS31FL3218_I2C_ADDRESS`.
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const is31fl3218_led_t PROGMEM g_is31fl3218_leds[IS31FL3218_LED_COUNT] = {
+/*   R     G     B */
+    {OUT1, OUT2, OUT3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index all have their anodes connected to `VCC`, and their cathodes on the `OUT1`, `OUT2` and `OUT3` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const is31fl3218_led_t PROGMEM g_is31fl3218_leds[IS31FL3218_LED_COUNT] = {
+/*   V */
+    {OUT1},
+    // etc...
+};
+```
+
+## API {#api}
+
+### `struct is31fl3218_led_t` {#api-is31fl3218-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-is31fl3218-led-t-members}
+
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint8_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void is31fl3218_init(void)` {#api-is31fl3218-init}
+
+Initialize the LED driver. This function should be called first.
+
+---
+
+### `void is31fl3218_write_register(uint8_t reg, uint8_t data)` {#api-is31fl3218-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-is31fl3218-write-register-arguments}
+
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void is31fl3218_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3218-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3218_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3218-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3218_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3218_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3218-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-is31fl3218-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3218_set_value(int index, uint8_t value)` {#api-is31fl3218-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3218_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3218-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3218_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3218_set_value_all(uint8_t value)` {#api-is31fl3218-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-is31fl3218-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3218_set_led_control_register(uint8_t index, bool red, bool green, bool blue)` {#api-is31fl3218-set-led-control-register-rgb}
+
+Configure the LED control registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3218_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3218-set-led-control-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3218_leds` array).
+ - `bool red`  
+   Enable or disable the red channel.
+ - `bool green`  
+   Enable or disable the green channel.
+ - `bool blue`  
+   Enable or disable the blue channel.
+
+---
+
+### `void is31fl3218_set_led_control_register(uint8_t index, bool value)` {#api-is31fl3218-set-led-control-register-mono}
+
+Configure the LED control registers for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3218_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3218-set-led-control-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3218_leds` array).
+ - `bool value`  
+   Enable or disable the LED.
+
+---
+
+### `void is31fl3218_update_pwm_buffers(void)` {#api-is31fl3218-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+---
+
+### `void is31fl3218_update_led_control_registers(void)` {#api-is31fl3218-update-led-control-registers}
+
+Flush the LED control register values to the LED driver.